Advances in Italian Mechanism Science [[electronic resource] ] : Proceedings of the First International Conference of IFToMM Italy / / edited by Giovanni Boschetti, Alessandro Gasparetto |
Edizione | [1st ed. 2017.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2017 |
Descrizione fisica | 1 online resource (XIV, 558 p. 322 illus.) |
Disciplina | 620 |
Collana | Mechanisms and Machine Science |
Soggetto topico |
Mechanical engineering
Mechanics Mechanics, Applied Robotics Automation Mechatronics Industrial engineering Production engineering Mechanical Engineering Theoretical and Applied Mechanics Robotics and Automation Industrial and Production Engineering |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Part I Biomechanical Engineering -- Design and Implementation of a Low-Cost Mechatronic System for Biomechanical Analysis of the Human Locomotion, by Paolo Boscariol, Alessandro Gasparetto, Nicola Giovanelli, Stefano Lazzer and Lorenzo Scalera -- A study of feasibility of a portable limb exercise device, by Giuseppe Carbone, Marco Ceccarelli and Candela Arostegui -- DARTAGNAN a self - balanced rehabilitation Robot able to work in active and passive modes on both sides of upper and lower limbs, by Guido Danieli, Paola Nudo, Michele Perrelli and Maurizio Iocco -- Dynamic Analysis of Handcycling: Mathematical Modelling and Experimental Tests, by Ghazaleh Azizpour, Abdelmajid Ousdad, Giovanni Legnani, Giovanni Incerti and Matteo Lancini -- A kinematic solution of a novel leg mechanism with parallel architecture, by Matteo Russo and Marco Ceccarelli -- Multi-target Planar Needle Steering with a Bio-Inspired Needle Design, by Christopher Burrows, Fangde Liu, Alexander Leibinger, Riccardo Secoli and Ferdinando Rodriguez Y Baena -- Development of an Active Force Plate for Testing Lower-limb Prostheses, by Cristiano Marinelli, Hermes Giberti and Ferruccio Resta -- Determination of the Human Arm Stiffness Efficiency with a Two Antagonist Muscles Model, by Daniele Borzelli, Stefano Pastorelli and Laura Gastaldi -- Design of a miniaturized safety clamping device for portable kidney replacement systems, by Paolo Boscariol, Giovanni Boschetti, Roberto Caracciolo, Mauro Neri, Dario Richiedei, Claudio Ronco and Alberto Trevisani -- Conceptual design of a mechatronic biomedical wearable device for blood ultrafiltration, by Giovanni Boschetti, Aldo Dalla Via, Nicola De Rossi, Francesco Garzotto, Mauro Neri, Luca Pamato, Claudio Ronco and Alberto Trevisani -- Design of an Underactuated Hand Exoskeleton with Joint Estimation, by Mine Sarac, Massimiliano Solazzi, Daniele Leonardis, Edoardo Sotgiu, Massimo Bergamasco and Antonio Frisoli -- Standard and natural motion protocols for the kinetic measurements of the squat, by Nicola Sancisi, Marco Cocconcelli, Riccardo Rubini and Vincenzo Parenti Castelli -- Design and Simulation of an Assisting Mechanism for Arm Exercises, by Betsy D. M. Chaparro-Rico, Daniele Cafolla, Marco Ceccarelli and Eduardo Castillo-Castaneda -- Part II History of Mechanism and Machine Science -- Role of Scientific-Technical Museums in the Future of Mechanical Science, by Alberto Rovetta and Edoardo Rovida -- An Analysis of the Hydraulic Saw of Hierapolis, by Cesare Rossi, Sergio Savino and Francesco Timpone -- Part III Linkages and Mechanical Controls -- Riccati equation based nonlinear filter: a case study for hydraulic actuators in presence of dead-zone, by Salvatore Strano and Mario Terzo -- Trajectories generation with constant extrusion rate for experimentations on AM techniques and extrusion based technologies, by Hermes Giberti, Luca Sbaglia and Marco Parabiaghi -- On the Design of Pneumatic Actuators: A Structural Optimization with a FEM-based Approach, by Giovanna Adele Naselli, Matteo Zoppi and Rezia Molfino -- Part IV Multi-Body Dynamics -- Multibody model of under-actuated tendon driven finger to study the antagonist tendon, by Sergio Savino -- A model reduction strategy for flexible-link multibody systems, by Ilaria Palomba, Dario Richiedei and Alberto Trevisani -- Part V Reliability -- Topology Optimization and Analysis of Static Transmission Error in Lightweight Gears, by Jakub Korta, Domenico Mundo, Giuseppina Ambrogio, Barbara Folino, Shadi Shweiki and Luigino Filice -- A strategy for moving cable driven robots safely in case of cable failure, by Giovanni Boschetti, Chiara Passarini and Alberto Trevisani -- Approaches to the Detectability of Faults in Railway Pantograph Mechanism, by Giancarlo Santamato, Massimiliano Gabardi, Massimiliano Solazzi and Antonio Frisoli -- Behaviour of tilting-pad journal bearings in case of large manufacturing errors, by Steven Chatterton, Phuoc Vinh Dang, Paolo Pennacchi and Andrea Vania -- Part VI Robotics and Mechatronics -- A new automated 2 DOFs 3D desktop optical scanner, by Maria Cristina Valigi, Silvia Logozzo and Gabriele Canella -- Adam's Hand: an underactuated robotic end-effector, by Giovanni A. Zappatore, Giulio Reina and Arcangelo Messina -- Automatic Plant for Fibers Extraction from Broom, by Pasquale Francesco Greco, Gianluca La Greca, Gabriele Larocca, Sebastiano Meduri, Basilio Sinopoli, Domenico Battaglia, Attilio Caseti, Armando Alose, Giuseppe Chidichimo and Guido Danieli -- Functional design of a robotic gripper for adaptive robotic assembly, by Fabio Oscari, Simone Minto and Giulio Rosati -- Optimal design of a reconfigurable end-effector for cable-suspended parallel robots, by Luca Barbazza, Damiano Zanotto, Giulio Rosati and Sunil K. Agrawal -- Kinematic Optimization of a 2DoF PRRRP Manipulator, by Simone Cinquemani, Hermes Giberti and Giovanni Legnani -- Optimized trajectory planning of pick and place operations to be performed by cable-driven parallel robots, by Luca Barbazza, Fabio Oscari, Simone Minto and Giulio Rosati -- An innovative method for sizing actuating systems of manipulators with generic tasks, by Hermes Giberti, Enrico Fiore and Giacomo Bonomi -- Experimentally based design of a manually operated baler for straw bale construction, by Walter Franco, Giuseppe Quaglia and Carlo Ferraresi -- Part VII Transportation Machinery -- Fast Calibration Procedure of the dynamic model of an Autonomous Underwater Vehicle from a reduced set of experimental data, by Benedetto Allotta, Riccardo Costanzi, Luca Pugi, Alessandro Ridolfi and Andrea Rindi -- Braking energy recovery in high speed trains: an innovative model, by Amedeo Frilli, Enrico Meli, Daniele Nocciolini, Simone Panconi, Luca Pugi and Andrea Rindi -- Dynamic model and instability evaluation of an articulated mobile agri-robot, by Giovanni Carabin, Alessandro Gasparetto, Fabrizio Mazzetto and Renato Vidoni -- NVH analysis of automotive components: a carbon fiber suspension system case, by Alessandro Fasana, Massimiliana Carello, Alessandro Ferraris and Davide Berti Polato -- Dynamics of a Tethered Rover on Rough Terrain, by Stefano Seriani, Paolo Gallina and Armin Wedler -- Wind propulsion for robot surface mobility, by Giulio Reina, Mario Foglia and Giovanni Boschetti -- Anti-dive front suspension for agricultural tractors: dynamic model and validation, by Francesco Biral, Riccardo Pelanda and Alberto Cis -- Dynamic model of an independent carts system, by Jacopo Cavalaglio Camargo Molano, Stefano Rossi, Marco Cocconcelli and Riccardo Rubini -- Tyre-road adherence conditions estimation for intelligent vehicle safety applications, by Mojtaba Sharifzadeh, Ahmad Akbari, Arash Farnam, Adolfo Senatore and Francesco Timpone -- Part VIII Tribology -- Tilting Pad Journal Bearing TEHD Analysis: An Innovative Model, by Amedeo Frilli, Enrico Meli, Daniele Nocciolini, Simone Panconi, Luca Pugi, Andrea Rindi and Stefano Rossi -- Thermo-hydrodynamic analysis of a tilting pad journal bearing with a general purpose CFD software, by Marco Del Chiaro, Paola Forte, Francesco Torrigiani and Enrico Ciulli -- Multiple holes rectangular gas thrust bearing: dynamic stiffness calculation with lumped parameters approach, by Federico Colombo, Mona Moradi, Terenziano Raparelli, Andrea Trivella and Vladimir Viktorov -- Theoretical and experimental study of a rectangular grooved-pocketed air pad, by Colombo Federico, Danial Ghodsiyeh, Terenziano Raparelli, Andrea Trivella and Vladimir Viktorov -- Experimental Identification of an Aerostatic Thrust Bearing, by Federico Colombo, Luigi Lentini, Terenziano Raparelli and Vladimir Viktorov -- Experimental analysis of the influence of the electrical arc on the wear rate of contact strip and contact wire in a.c. system, by Giuseppe Bucca, Andrea Collina and Ezio Tanzi -- Part IX Vibrations -- Low-cost Experimental Assessment of Forces in the Contact Bridge-Soundboard of Stringed Musical Instruments, by Enrico Ravina -- Vibration Modes of Piezoelectric Bimorphs: a Sensitivity Analysis, by Alberto Borboni, Cinzia Amici, Valter Cappellini and Rodolfo Faglia -- Concurrent Active Control and Dynamic Structural Modification in the Design and the Optimization of Vibrating Systems, by Dario Richiedei, Roberto Belotti and Roberto Caracciolo -- A vibration isolator based on magneto-rheological elastomer, by Renato Brancati, Giandomenico Di Massa and Stefano Pagano -- A Numerical-Analytical Model for the Study of the Elasto Kinematic Behavior of a Macpherson Suspension, by Francesco Timpone -- A smart system for shock and vibration isolation of sensitive electronic devices on-board a vehicle, by Stefano Pagano, Salvatore Strano, Giandomenico Di Massa, Marco De Michele, Giovanni Pisani, Giuseppe Frisella and Sergio Lippolis -- Wavelet analysis of Gear rattle induced by a multi-harmonic excitation, by Renato Brancati, Ernesto Rocca, Sergio Savino and Francesco Timpone -- Special Session in honor of prof. Aldo Rossi for his 70th birthday Chairman: prof. Carlo Ugo Galletti -- Analytical and Multibody Modelling of a Quick-Release Hook Mechanism, by Luca Bruzzone, Davide Bonatti, Giovanni Berselli and Pietro Fanghella -- Evolution of a Dynamic Model for Flexible Multibody Systems, by Paolo Boscariol, Paolo Gallina, Alessandro Gasparetto, Marco Giovagnoni, Lorenzo Scalera and Renato Vidoni -- Anti-Hedonistic Mechatronic Systems, by Lorenzo Scalera, Paolo Gallina, Alessandro Gasparetto and Marco Giovagnoni -- On the use of cable-driven robots in early inpatient stroke Rehabilitation, by Giulio Rosati, Stefano Masiero and Aldo Rossi. . |
Record Nr. | UNINA-9910149461403321 |
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2017 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Advances in Mechanism Design II [[electronic resource] ] : Proceedings of the XII International Conference on the Theory of Machines and Mechanisms / / edited by Jaroslav Beran, Martin Bílek, Petr Žabka |
Edizione | [1st ed. 2017.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2017 |
Descrizione fisica | 1 online resource (XIII, 405 p. 259 illus.) |
Disciplina | 621 |
Collana | Mechanisms and Machine Science |
Soggetto topico |
Mechanics
Mechanics, Applied Control engineering Robotics Mechatronics Mechanical engineering Computer mathematics Theoretical and Applied Mechanics Control, Robotics, Mechatronics Mechanical Engineering Computational Science and Engineering |
ISBN | 3-319-44087-X |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Preface -- Scientific Committee -- Patronage -- Part I General Theory of Machines and Mechanisms, Analysis and Synthesis of Planar and Spatial Mechanisms, Linkages and Cams, Robots and Manipulators -- IFToMM in MMS developments, by M. Ceccarelli -- General Algorithm for Computing the Theoretical Centering Precision of the Gripping Devices, by E.-C. Lovasz, V. Mesaroş-Anghel, C. M. Gruescu, C. E. Moldovan and M. Ceccarelli -- Design and Development of a Heddle Shaft Mechanism for Air-jet Weaving Machines, by F. Schwarzfischer, S. Kurtenbach, J. Onischke and B. Corves -- On Transfemoral Prosthetic Knee Design Using RRSS Motion and Axode Generation, by J. D’Alessio K. Russell and R. S. Sodhi -- On Approach Based on Lie Groups and Algebras to the Structural Synthesis of Parallel Robots, by L. Rybak, D. Malyshev and A. Chichvarin -- Life Estimation of the Contact Surfaces, by M. Hejnová and J. Ondrášek -- Calculation of the Contours of a Radial Double Cam Based on an Approximate Course of the 2nd Derivative of the Displacement Law of a Working Link, by P. Jirásko and M. Václavík -- The Elastic Compression in the Contact Region of a Cam Mechanism General Kinematic Pair, by J. Ondrášek -- Design of a Legged Walking Robot with Adjustable Parameters, by Y. Zhang, V. Arakelian and J.-P. Le Baron -- Positioning Control of a Micro Manipulation Robot Based on Voice Command Recognition for the Microscopic Cell Operation, by H. Terada, K. Makino, H. Nishizaki, E. Yanase, T. Suzuki and T. Tanzawa -- Spherical Ultrasonic Motor for Space, by U. Nishizawa, S. Toyama and T.Oohashi -- Part II Dynamics of Machines and Mechanisms, Rotor Dynamics -- Multi-Physical Analysis of the Forces in the Flexible Rotor Supported by the Magnetorheological Squeeze Film Dampers, by P. Ferfecki, J. Zapoměl and M. Marek -- Experimental Evaluation of a Rotor Model Based Foundation Identification Procedure, by M. Yu, N. Feng, E. Hahn -- Researching of the Method of Separation of Fine-Grain Particles by Centrifugation in a Liquid Medium, by A. B. Kydyrbekuly, L. A. Khajieva, G. E. Ybraev -- The Steady State Response of Multi-disc Rotors Damped by Magnetorheological Squeeze Film Dampers, by J. Zapoměl and P. Ferfecki -- Inertia Matrix and Vehicle Driveability, by P. Brabec, M. Malý and R. Voženílek -- Unexpected Vibrations of Relatively Simple Cutting Machine Mechanism, by P. Šidlof, Z. Braier, P. Klouček and J. Ondrášek -- Effect of Oil Viscosity on Pulsating Flow in Pipe, by L. Hružík, A. Bureček and M. Vašina -- Experimental Research and Mathematical Modeling of Scroll Machine in Air Motor Mode, by V.I. Ivlev, S.Yu. Misyurin and A.P. Nelyubin -- Analysis of the Mechanism of the Drill Hammer, by M. Konečný -- Free Vibration Frequency Spectrum of Four-planetary Gearing Box, by L. Půst, L. Pešek, A. Radolfová -- Speed Control of 3-phase Induction Motor in Presence of Sommerfeld Effect, by A. Bisoi, R. Bhattacharyya and A.K. Samantaray -- Part III Computational Mechanics -- Various Strategies of Elastic Forces Evaluation in the Absolute Nodal Coordinate Formulation, by R. Bulín and M. Hajžman -- Nonlinear Vibration of Nuclear Fuel Rods, by Š. Dyk and V. Zeman -- Thermal Field Simulation of Repair Threads in a Hole in the Cover of a Pressure Vessel by Welding using Sysweld, by R. Jančo and P. Élesztős -- Simulation of Isothermal Compression Test, by I. Matoušek and O. Matoušek -- Influence of Bubbles in the Shock Liquid at its Compressibility, by M. Sivčák and T. Hruš -- Procedure for Seismic Analysis of Liquid Storage Tanks using FEM Approach and Analytical Models, by M. Sivý and M. Musil -- Part IV Vibration and Noise in Machines -- Forced Response Reduction of a Compressor Blisk Rotor Employing Intentional Mistuning, by B. Beirow, A. Kühhorn and J. Nipkau -- Flat Flexural Vibration of Drill-String with an Initial Curvature, by A.S. Sergaliyev and L.A. Khajiyeva -- A Design of the Two Architectures of Electromagnetic Vibration Energy Harvesting Devices, by M. Maták, M. Gašparík, P. Šolek, M. Margetin -- Acoustic Solution for a Car Cab Interior, by P. Němeček -- Possibilities for Reducing Car Gearbox Vibration and Noise, by E. Tomeh -- Reduced Order Analyses of Multi-Stage Coupled Structures with Main Focus on Disk-Dominated Modes, by R. Weber and A. Kühhorn -- Part V Optimization of Mechanisms and Machines, Mechanisms of Textile Machines -- Composite Production and Industrial Robot Trajectory Calculation, by T. Martinec, J. Mlýnek and M. Petrů -- The Pinion Teeth Temperatures Measured during the Different Power Levels Operation, by M. Mazac and M. Maly -- A Novel Four Wheel Vehicle, by S. Pramanik and Dr. S. S. Thipse -- Cam Mechanism for Car Seat Testing, by P. Srb, P. Kulhavy, V. Fliegel and P. Lepsik -- Offset of Natural Frequencies of Toothed Wheel by Means of Parametric Optimisation, by J.Stadnicki and M.Głąbek -- Diagnosis of a Common Rail High Pressure Injector System, by P. Starý -- Design of a Tribometer for Piston Rings, by R. Voženílek, S. Beroun and J. Břoušek -- Mathematical Model of Elastic Heald, by M. Bílek, Š. Kovář and J. Skřivánek -- Dynamic Model of the Mechanical System of the Needle Bar, by J. Komárek -- Electronic Link Between the Needle Cylinder and the Dial of the Small Diameter Knitting Machine, by J. Skřivánek, M. Bílek, O. Baťka and M. Kašpárek -- Utilization of the System of Magnetic Spring with Specific Characteristic for the Central Traversing System of the Rotor Spinning Machine, by J. Valtera -- Mechatronic Model for Traversing Rod Longitudinal Vibration Analysis, by P. Žabka -- Adaptive Timing of Relay Nozzles of an Air Jet Weaving Loom, by J. Žák -- Part VI Mechatronics, Control and Monitoring Systems of Machines -- The Testing Stand of the Direct Linear and the Torque Servo Drives Siemens Controlled by the Simotion C, by J. Antoš -- New Method of Contactless Measurement and Analysis of CNC Machine Spindle Lopping, by Z. Braier, P. Šidlof, V. Čejka and P. Žďárek -- Smart Rehabilitation Splint, by J. Cernohorsky and M. Cadek -- Implementation of Specific Displacement Diagrams for the Control of Kinetic Sculptures with Yaskawa Electronic Cams, by P. Dostrašil -- Semi-automatic Transmission in a Car, by M. Gašparík, M. Černý, P. Šolek and M. Maták -- Improvement of Dynamic Characteristics of the Car in the Light of Technological Evolution, by F. Palčák -- Rotary Table Machine Input Parameters Optimization, by A. Richter and J. Ondrášek. |
Record Nr. | UNINA-9910254350703321 |
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2017 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Advances in Structures, Systems and Materials [[electronic resource] ] : Select Proceedings of ERCAM 2019 / / edited by M. Vinyas, Amelia Loja, Krishna R. Reddy |
Edizione | [1st ed. 2020.] |
Pubbl/distr/stampa | Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 |
Descrizione fisica | 1 online resource (316 pages) |
Disciplina | 620 |
Collana | Lecture Notes on Multidisciplinary Industrial Engineering |
Soggetto topico |
Civil engineering
Statics Aerospace engineering Astronautics Mechanics Mechanics, Applied Structural materials Civil Engineering Mechanical Statics and Structures Aerospace Technology and Astronautics Theoretical and Applied Mechanics Structural Materials |
ISBN | 981-15-3254-0 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | 1. Advanced materials and applications -- 2. Computational mechanics and Mathematical modeling -- 3. Structural analysis -- 4. Engineering systems. |
Record Nr. | UNINA-9910392746303321 |
Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Analytical Mechanics [[electronic resource] /] / by Carl S. Helrich |
Autore | Helrich Carl S |
Edizione | [1st ed. 2017.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2017 |
Descrizione fisica | 1 online resource (XV, 349 p. 58 illus.) |
Disciplina | 531.01515 |
Collana | Undergraduate Lecture Notes in Physics |
Soggetto topico |
Mechanics
Physics Mechanics, Applied Classical Mechanics Mathematical Methods in Physics Theoretical and Applied Mechanics |
ISBN | 3-319-44491-3 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | History -- Lagrangian Mechanics -- Hamiltonian Mechanics -- Solid Bodies -- Hamilton-Jacobi Approach -- Complex Systems -- Chaos in Dynamical Systems -- Special Relativity -- Appendices -- Differential of S -- Hamilton-Jacobi Equation -- With Variables p, q, q -- Zero-Component Lemma -- Maxwell Equations from Field Strength Tensor -- Differential Operators -- Answers to Selected Exercises. . |
Record Nr. | UNINA-9910254597703321 |
Helrich Carl S | ||
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2017 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Application of Imaging Techniques to Mechanics of Materials and Structures, Volume 4 [[electronic resource] ] : Proceedings of the 2010 Annual Conference on Experimental and Applied Mechanics / / edited by Tom Proulx |
Edizione | [1st ed. 2013.] |
Pubbl/distr/stampa | New York, NY : , : Springer New York : , : Imprint : Springer, , 2013 |
Descrizione fisica | 1 online resource (447 p.) |
Disciplina | 612 |
Collana | Conference Proceedings of the Society for Experimental Mechanics Series |
Soggetto topico |
Mechanics
Mechanics, Applied Materials science Theoretical and Applied Mechanics Classical Mechanics Characterization and Evaluation of Materials |
ISBN |
1-283-61192-9
9786613924377 1-4419-9796-2 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Application of Imaging Techniques to Mechanics of Materials and Structures, Volume 4; Preface; Contents; Identification from full-field measurements: a promising perspective in experimental mechanics; ABSTRACT; INTRODUCTION; FULL-FIELD MEASUREMENT TECHNIQUES; Kinematical measurement; Thermal measurements; APPLICATIONS OF FULL-FIELD MEASUREMENT TECHNIQUES IN EXPERIMENTAL SOLID MECHANICS; IDENTIFICATION OF CONSTITUTIVE PARAMETERS FROM FULL-FIELD MEASUREMENTS; Statement of the problem; Model updating; Constitutive gap method; Equilibrium gap method; Virtual fields method; CONCLUSION; REFERENCES
Identification of Cohesive-Zone Laws from Crack-tip Deformation FieldsABSTRACT; INVERSE PROBLEM OF COHESIVE ZONE MODEL; INTEGRATED APPROACH; Optical measurement of crack-tip deformation field; Numerical noise reduction in full-field data; Extracting cohesive zone laws of crazing; REFERENCES; Recovery of 3D stress intensity factors from surface full-field measurements; ABSTRACT; Three dimensional effects in linear fracture mechanics; Extending the fields inside the solid: the data completion method; Cauchy problem for the Elasticity operator:; Computation of 3D SIFs and energy release rates Determination of 3D KIFs for a straight crack in a thick plate from surface displacements measurementsConclusion; References; Characterization of aluminum alloys using a 3D full field measurement; ABSTRACT; INTRODUCTION; 3D STRAIN FIELD RECONSTRUCTION; THEORETIC MODELS; PARAMETER IDENTIFICATION; CONCLUSION; REFERENCES; Low Strain Rate Measurements on Explosives Using DIC; Abstract; Introduction; Materials Tested; Instrumentation; Testing; Thermal Expansion Measurements; Poisson's Ratio Measurements; Axial-Torsion Testing; Tensile Creep; Summary; Acknowledgments; REFERENCES Investigation on failure mechanisms of composite structures subjected to 3D state of stressesABSTRACT; 1. INTRODUCTION; 2. EXPERIMENTAL WORK; 2.1 Specimen details; 2.2 Experimental devices; 2.3 Some experimental results on FPB tests; 3. IDENTIFICATION OF THE OUT-OF-PLANE PROPERTIES; 3.1 Identification of the out-of-plane tensile strength; 3.2 Identification of the out-of-plane shear strength; 4. CONCLUSIONS AND PERSPECTIVES; ACKNOWLEDGMENTS; REFERENCES; Structural damage assessment in fiber reinforced composites using image decomposition; ABSTRACT; INTRODUCTION; IMAGE DECOMPOSITION SPECIMEN, EXPERIMENTAL SETUP AND METHODZERNIKE MOMENTS; FOURIER DESCRIPTORS; FOURIER-ZERNIKE DESCRIPTORS; CONCLUSIONS; BIBLIOGRAPHY; Finite element Model matching based on optical measurement fields on single shear lap joint; Abstract; 1. Introduction; 2. Identification from measurements of mechanical fields; 2.1. Presentation of the method; 2.2. Experimental procedure; 2.3. Manufacturing of specimens; 2. Finite Elements Analysis; 3. Results and discussion; 4. Conclusion; References Interaction between a dynamically growing crack with stiff and compliant inclusions using DIC and high-speed photography |
Record Nr. | UNINA-9910438049003321 |
New York, NY : , : Springer New York : , : Imprint : Springer, , 2013 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Applications of Vector Analysis and Complex Variables in Engineering [[electronic resource] /] / by Otto D. L. Strack |
Autore | Strack Otto D. L |
Edizione | [1st ed. 2020.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2020 |
Descrizione fisica | 1 online resource (228 pages) |
Disciplina | 515.63 |
Soggetto topico |
Applied mathematics
Engineering mathematics Computer mathematics Mechanics Mechanics, Applied Mathematical and Computational Engineering Computational Science and Engineering Theoretical and Applied Mechanics |
ISBN | 3-030-41168-0 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | 1. Vectors in Three-Dimensional Space -- 2. Vector Fields -- 3. Fundamental Equations for Fluid Mechanics -- 4. Integral Theorems -- 5. Coordinate Transformations; Definitions of Vectors and Tensors -- 6. Partial Differential Equations of the First Order -- 7. Partial Differential Equations of the Second Order -- 8. The Elliptic Case: Two Complex Characteristics -- 9. Applications of Complex Variables -- 10. The Parabolic Case: Two Coinciding Characteristics -- 11. The Hyperbolic Case: Two Real Characteristics -- 12. Hyperbolic Quasi Linear Partial Differential Equations -- 13. The Navier-Stokes Equations -- Appendix A. Numerical Integration of the Cauchy Integral -- Appendix B. List of Problems with Page Numbers. |
Record Nr. | UNINA-9910392739903321 |
Strack Otto D. L | ||
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2020 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Applied Dynamics [[electronic resource] /] / by Werner Schiehlen, Peter Eberhard |
Autore | Schiehlen Werner |
Edizione | [1st ed. 2014.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2014 |
Descrizione fisica | 1 online resource (XI, 215 p. 78 illus., 3 illus. in color.) |
Disciplina | 531.11 |
Soggetto topico |
Mechanics
Mechanics, Applied Control engineering Robotics Mechatronics Automotive engineering Computer mathematics Theoretical and Applied Mechanics Control, Robotics, Mechatronics Automotive Engineering Computational Science and Engineering |
ISBN | 3-319-07335-4 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | From the Contents: Introduction -- Purpose of applied dynamics -- Contribution of analytical mechanics -- Basics of kinematics -- Free systems -- Basics of dynamics -- Dynamics of a point -- Principles of mechanics -- Principle of virtual work -- Multibody systems -- Local equations of motion -- Finite-Elemente systems -- Local equations of motion -- Continuous systems -- Local equations of motion -- State equations of mechanical systems -- Nonlinear state equations -- Numerical equations -- Integration of nonlinear differential equations. |
Record Nr. | UNINA-9910299743603321 |
Schiehlen Werner | ||
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2014 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Asymptotic Stability of Steady Compressible Fluids [[electronic resource] /] / by Mariarosaria Padula |
Autore | Padula Mariarosaria |
Edizione | [1st ed. 2011.] |
Pubbl/distr/stampa | Berlin, Heidelberg : , : Springer Berlin Heidelberg : , : Imprint : Springer, , 2011 |
Descrizione fisica | 1 online resource (XIV, 235 p.) |
Disciplina | 620.1/0640151 |
Collana | Lecture Notes in Mathematics |
Soggetto topico |
Applied mathematics
Engineering mathematics Mathematical models Partial differential equations Physics Fluids Mechanics Mechanics, Applied Applications of Mathematics Mathematical Modeling and Industrial Mathematics Partial Differential Equations Mathematical Methods in Physics Fluid- and Aerodynamics Theoretical and Applied Mechanics |
ISBN | 3-642-21137-2 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | 1 Topics in Fluid Mechanics -- 2 Topics in Stability -- 3 Barotropic Fluids with Rigid Boundary -- 4 Isothermal Fluids with Free Boundaries -- 5 Polytropic Fluids with Rigid Boundary. |
Record Nr. | UNISA-996466628803316 |
Padula Mariarosaria | ||
Berlin, Heidelberg : , : Springer Berlin Heidelberg : , : Imprint : Springer, , 2011 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. di Salerno | ||
|
Asymptotic Stability of Steady Compressible Fluids [[electronic resource] /] / by Mariarosaria Padula |
Autore | Padula Mariarosaria |
Edizione | [1st ed. 2011.] |
Pubbl/distr/stampa | Berlin, Heidelberg : , : Springer Berlin Heidelberg : , : Imprint : Springer, , 2011 |
Descrizione fisica | 1 online resource (XIV, 235 p.) |
Disciplina | 620.1/0640151 |
Collana | Lecture Notes in Mathematics |
Soggetto topico |
Applied mathematics
Engineering mathematics Mathematical models Partial differential equations Physics Fluids Mechanics Mechanics, Applied Applications of Mathematics Mathematical Modeling and Industrial Mathematics Partial Differential Equations Mathematical Methods in Physics Fluid- and Aerodynamics Theoretical and Applied Mechanics |
ISBN | 3-642-21137-2 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | 1 Topics in Fluid Mechanics -- 2 Topics in Stability -- 3 Barotropic Fluids with Rigid Boundary -- 4 Isothermal Fluids with Free Boundaries -- 5 Polytropic Fluids with Rigid Boundary. |
Record Nr. | UNINA-9910484743503321 |
Padula Mariarosaria | ||
Berlin, Heidelberg : , : Springer Berlin Heidelberg : , : Imprint : Springer, , 2011 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Aufgaben zu Technische Mechanik 1–3 [[electronic resource] ] : Statik, Elastostatik, Kinetik / / von Werner Hauger, Christian Krempaszky, Wolfgang A. Wall, Ewald Werner |
Autore | Hauger Werner |
Edizione | [9th ed. 2017.] |
Pubbl/distr/stampa | Berlin, Heidelberg : , : Springer Berlin Heidelberg : , : Imprint : Springer Vieweg, , 2017 |
Descrizione fisica | 1 online resource (VIII, 395 S. 500 Abb., 41 Abb. in Farbe.) |
Disciplina | 620.1 |
Soggetto topico |
Mechanics
Mechanics, Applied Applied mathematics Engineering mathematics Theoretical and Applied Mechanics Mathematical and Computational Engineering |
ISBN | 3-662-53344-8 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | ger |
Nota di contenuto | Formeln und Aufgaben: I. Statik -- II. Elastostatik -- III. Kinetik -- Lösungen: I. Statik -- II. Elastostatik -- III. Kinetik. |
Record Nr. | UNINA-9910483522303321 |
Hauger Werner | ||
Berlin, Heidelberg : , : Springer Berlin Heidelberg : , : Imprint : Springer Vieweg, , 2017 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|