Pubbl/distr/stampa	Plaffikon, Switzerland : , : Trans Tech Publications, , 2015
Descrizione fisica	1 online resource (1044 p.)
Disciplina	720.47
Collana	Applied mechanics and materials
Soggetto topico	Building materials - Environmental aspects Sustainable construction
Soggetto genere / forma	Electronic books.
ISBN	3-03826-776-7
Formato	Materiale a stampa
Livello bibliografico	Monografia
Lingua di pubblicazione	eng
Nota di contenuto	Frontiers of Mechanical Engineering and Materials Engineering III; Preface, Committee and Sponsor; Table of Contents; Chapter 1: Materials, Technologies for Processing and Chemical Engineering; Hydro-Oleophobic Property of Butterfly Wing Surface and Biomimetic Fabrication of Hydrophobic Silver Film; Inadhesion Property of Aluminum Surfaces with Bionic Morphology; Influence of Reaction Temperature on the Densification Behavior of the SiC/B4C Composites; Mechanical Properties of the Ecological Filling Blocks of the New Composite Wall Based on the Unified Strength Theory Process Optimization and Characterizations of Enzyme-Extracted and Acid-Extracted Collagen from Scale of Bighead CarpResearch on Shrinking Performance of Recycled Asphalt Pavement Material Stabilized with Inorganic Binder; Simulation Study on Aluminium Alloy 7075-T6 Welding Based on ANSYS Software; Synthesis and Characterization of Supported on Silica Based Ionic Liquids; Synthesis and Dielectric Properties of PPy/TiO2 Composite; The Preparation of NiO/BiVO4 Composite Photocatalyst and its Enhanced Photocatalytic Activities Thermal Aging Behavior of Ethylene Propylene Diene Monomer (EPDM) RubberThick Nickel Coating on Surface of Quartz Optical Fiber by Electrochemical Deposition Method; Enzymatic Reaction Kinetics of Papain-Extracted Collagen from Bighead Carp Scales; Electrochemical Preparation and Application of PEDOT/Ferrocene Modified Electrode; Experimental Study on Milling Formation and Milling Force in Green Machining Ti6Al4V; Experimental Study on the Loaded Property of Waste Fiber Recycled Concrete Beam-Column Joints Process Optimization and Characterization of Copper Oxide/Zeolite for Heterogeneous Catalytic Wet Oxidation of Dyeing WastewaterStructural, Electronic and Optical Properties of S-Doped Anatase TiO2; The Study of a New Type of Cast Iron Material Used in the Glass Mould; Process Modeling of CuO/Zeolite Preparation for CODCr Removal from Acid Bright Red GR Wastewater; An Elasto-Plastic Constitutive Model for Unidirectional Fiber Reinforced Metal Matrix Composites; Experimental Research on Nano Infrared Smoke Material; The Modified Maximum Shear Stress Failure Theory of Ductile Material Characterization on the Precipitates in the Ti-Ni-Al-Zr Alloy during Heat TreatmentLinear Static Analysis of Composite Hat Stiffener Based on ANSYS; Microstructure Characterization and Mechanical Properties of a Zn and Rare Earth Modified Mg Alloy; Research on the Material Differences of 7050-T7451 Aluminum Alloy; Study on Esterifying Conditions of Shrinkage Reducing Monomer; Application of Biological Contact Oxidation Process of Sewage Treatment in a Hospital Study; Effect of Mg-30%La Modification on the Microstructure of Al-7Si Alloy Effects of the Repetition Number on Static and Dynamic Magnetic Properties of Metal/Native Oxide Multilayer Films
Record Nr.	UNINA-9910460665403321

Pubbl/distr/stampa	Singapore : , : Springer, , [2022]
Descrizione fisica	1 online resource (791 pages)
Disciplina	624.151
Soggetto topico	Sustainable construction Geotechnical engineering
ISBN	981-16-6277-0 981-16-6276-2
Formato	Materiale a stampa
Livello bibliografico	Monografia
Lingua di pubblicazione	eng
Nota di contenuto	Intro -- Contents -- Development in Geotechnical Engineering -- Improving the Gypseous Soil Bearing Capacity Using Geotextile Reinforcement Under Dry Condition -- 1 Introduction -- 2 Material, Equipment, and Test Setup -- 3 Results and Discussion -- 4 Conclusions -- References -- Numerical Modeling of Circular Tunnel Alignment Under Seismic Loading -- 1 Introduction -- 2 Alignment of Tunneling -- 3 Seismic Loading -- 4 Numerical Modeling -- 5 Results and Discussion -- 6 Conclusions -- References -- Triaxial Compression Behavior of Sandy Soil Polluted with Crude Oil -- 1 Introduction -- 2 Materials and Preparation of Samples -- 3 Experimental Work -- 4 Results and Discussion -- 5 Conclusions -- References -- Isotropic and Cross-Anisotropic Stiffness Parameters for Unsaturated Soils Using Conventional and Bishop's Stress State Variables -- 1 Introduction -- 2 Theoretical Background -- 3 MATLAB Code -- 4 Interpretations and Discussion -- 5 Conclusions -- References -- The Effect of Electric Field on the Settlement Behavior to Improve Gypseous Soil -- 1 Introduction -- 2 Soil Sampling and Geotechnical Properties -- 3 Experiential Work -- 4 Testing Procedures -- 5 Results and Discussion -- 6 Conclusion -- References -- Tsunami Waves, Causes and Its Implications: A Review -- 1 Introduction -- 2 Climate Change -- 3 Tsunami Occurrence Factors -- 4 Tsunami Propagation -- 5 Run up and Inundation -- 6 Tsunami Wave-Structure Interaction -- 7 Tsunami and Geo-Earth Structure Failure -- 8 Conclusions -- References -- The Scale Effects on the Shear Strength Behavior of Silty Sand Soil in Direct Shear Tests -- 1 Introduction -- 2 Experimental Program -- 3 Results and Discussion -- 4 Conclusions -- References -- Tunnel-Soil-Structure Interaction Under Seismic Load -- 1 Introduction -- 2 Methodology and Numerical Model -- 3 Results and Discussion -- 4 Conclusion. References -- Effect of Microbial Induced Calcite Precipitation on Shear Strength of Gypseous Soil in Dry and Soaking Conditions -- 1 Introduction -- 2 Material and Methods -- 3 Result and Discussion -- 4 Conclusions -- References -- Suction-Resistivity Relationship in Unsaturated Gypseous Soil -- 1 Introduction -- 2 Experimental Work -- 3 Testing Procedure -- 4 Results and Discussion -- 5 Conclusions -- References -- Assessment of Effect of Tidal Level and Footing Proximities on Retaining Wall-Grain Interactions Using Finite Element Method -- 1 Introduction -- 2 Methodology -- 3 Finite Element Method Simulations -- 4 Numerical Results and Analysis -- 5 Summary and Conclusions -- References -- Evaluation of Dam Breach Parameters Using Different Approaches for Earth-Fill Dam -- 1 Introduction -- 2 Definitions of Breach Parameters -- 3 The Governing Approaches -- 4 The Study Area -- 5 The Flood Hydrograph -- 6 Results and Discussion -- 7 Conclusion -- References -- Manufacturing of Small-Scale Flume to Assess the Riverbank's Settlement -- 1 Introduction -- 2 Parts of the Designed Flume -- 3 Test of Models -- 4 Operating, Measuring Equipment, and Control Unit -- 5 Differential Linear Displacement Sensor (LVDT, Linear Variable Differential Transducer) -- 6 Model Test Results -- 7 Conclusions -- References -- Groundwater Analysis Based on the Hydrogeological Model of Taichung Basin, Taiwan -- 1 Introduction -- 2 Numerical Analysis Software and Theory Introduction -- 3 Research Site and Data Collection -- 4 Historical Rainfall Distribution -- 5 Historical Groundwater Levels and Analysis -- 6 Conclusions -- References -- Design and Manufacturing of Rainfall Simulator Machine for the Soil Erosion Investigation -- 1 Introduction -- 2 Design of Rainfall Simulator Machine -- 3 The Rainfall Simulator Machine Performance -- 4 The Rainfall Uniformity. 5 Conclusions -- References -- Numerical Analysis of Water and Crude Oil Flux from Clayey Soil by GeoStudio-SEEP/W -- 1 Introduction -- 2 Methods and Materials -- 3 Results and Discussions -- 4 Conclusions -- References -- Evaluation of the Efficiency of a Selected Section of the Mosul Dam Grout Curtain -- 1 Introduction -- 2 The Grout Curtain in Mosul Dam Foundations -- 3 Grout Curtain in Mosul Dam -- 4 Mosul Dam Instrumentation (Piezometers) -- 5 The Efficiency of the Grout Curtain -- 6 Modeling the Dam in SEEP/W Software -- 7 Analysis of the Model and Discussion of the Results -- 8 Conclusion -- References -- Stability of Slopes Under Unsaturated Conditions Using a Modified Upper Bound Theorem -- 1 Introduction -- 2 Modified DLO Approach -- 3 Modeling Unsaturated Condition -- 4 Numerical Results -- 5 Conclusions -- References -- Monitoring of the Western Breakwater of Al-Faw Grand Port-South of Iraq Using Differential InSAR-ISBAS Technique -- 1 Introduction -- 2 Study Area -- 3 DInSAR Data and Analysis -- 4 Results and Discussion -- 5 Conclusion -- References -- Numerical Modelling of Surface Runoff in Watershed Areas Related to Bahr AL-Najaf -- 1 Introduction -- 2 Materials and Methods -- 3 Results of Calibration and Validation -- 4 Conclusions -- References -- Challenges in Foundation Engineering -- Bearing Capacity of Model Strip Footing on Unsaturated Very Loose Sand -- 1 Introduction -- 2 Model Testing Procedure -- 3 Properties of the Tested Soil -- 4 Results of the Model Tests -- 5 Numerical Modeling -- 6 Prediction of Bearing Capacity -- 7 Summary and Conclusions -- References -- Overall Static and Seismic Stability of Oil Tank Resting on Shallow Foundation: A Case Study -- 1 Introduction -- 2 Site Characterization -- 3 Numerical Modelling -- 4 Validation of the Present Numerical Analysis -- 5 Results and Discussion. 6 Oil Tank Resting Over Untreated Soil -- 7 Oil Tank Resting Over Improved Soil -- 8 Dynamic Analysis -- 9 Summary and Conclusions -- References -- Numerical Modeling of Screw Piles Performance Under Static and Seismic Loads in Soft Soils -- 1 Introduction -- 2 Numerical Modeling -- 3 Results and Discussion -- 4 Conclusions -- References -- Numerical Simulation of Driven Piles Under Static Axial Compressive Load Testing Using Finite Element Model -- 1 Introduction -- 2 Site Characterization -- 3 Experiential Static Axial Compressive Load Test -- 4 Numerical Modeling -- 5 Results and Discussion -- 6 Conclusions -- References -- Experimental Investigation of Pullout Capacity of Screw Piles in Soft Clayey Soil -- 1 Introduction -- 2 Geotechnical Properties of Soft Clay -- 3 Physical Model and Piles -- 4 Testing Procedure -- 5 Load Transmission Mechanism -- 6 Results and Discussion -- 7 Conclusions -- References -- Effect of Embankment on the Behavior of Rigid Passive Pile Group in Sandy Soil -- 1 Introduction -- 2 Material Properties -- 3 Experimental Settings and Testing Procedure -- 4 Data Analysis -- 5 Results and Discussion -- 6 Conclusions -- References -- Effect of River Water Level on the Shallow Foundation Behavior with Two Slopes of Riverbank -- 1 Introduction -- 2 Material and Instruments Used -- 3 Results and Discussion -- 4 Conclusions -- References -- Numerical Modeling of Sheet Pile Quay Wall Performance Subjected to Earthquake -- 1 Introduction -- 2 Quay Walls -- 3 Seismic Loading -- 4 Methodology of Numerical Modeling -- 5 Results and Discussions -- 6 Conclusions and Recommendations -- References -- Effect of Wing Ratio of Single Helix Screw Pile on Ultimate Compression Capacity Embedded in Cohesionless Soil -- 1 Introduction -- 2 Experimental Tests and Physical Modeling -- 3 Installation and Loading Machine. 4 The Compression Capacity Results -- 5 Conclusions -- References -- Numerical Analysis of Piles Group Surrounded by Grouting Under Seismic Load -- 1 Introduction -- 2 Soil Improvement by Grouting -- 3 Seismic Loading -- 4 Numerical Modeling -- 5 Results and Discussion -- 6 Conclusion -- References -- Effect of Spacing Ratio on the Pull-Out Capacity of Double Helix Pile in Organic Soil -- 1 Introduction -- 2 Materials -- 3 Test Method -- 4 Results and Discussions -- 5 Conclusions -- References -- Comparative Analysis of Static and Dynamic Pile Tests at the Site of the Astana Medical University Hospital in Nur-Sultan, Kazakhstan -- 1 Introduction -- 2 Dynamic Pile Tests -- 3 Static Pile Tests -- 4 Conclusions -- References -- Vertical Displacement Analysis of Embedded Square Foundation Under Vertical Dynamic Load -- 1 Introduction -- 2 Vertical Displacement of Square Surface Foundation -- 3 Effect of Square Foundation Embedment on the Vertical Displacement -- 4 Results and Discussion -- 5 Conclusions -- References -- Investigation of Laterally Loaded Pile Response and CohesionLess Soil Deformation Pattern Using PIV Technique -- 1 Introduction -- 2 Particle Image Velocimetry Technique -- 3 Experimental Work -- 4 Model Test Results -- 5 Conclusions -- References -- An Experimental Investigation the Response of Pile Groups to Inclined Cyclic Loading in Sandy Soil -- 1 Introduction -- 2 Materials Used and Experimental Testing Program -- 3 Results and Discussion -- 4 Conclusions -- References -- Numerical Modeling of Under Reamed Piles Behavior Under Dynamic Loading in Sandy Soil -- 1 Introduction -- 2 Numerical Model -- 3 Results and Discussion -- 4 Conclusions -- References -- Merges in Structural Engineering and Construction Materials -- Exploring Biochar as Stable Carbon Material for Suppressing Erosion in Green Infrastructure -- 1 Introduction. 2 Methodology.
Record Nr.	UNINA-9910743213503321

Edizione	[3rd ed.]
Pubbl/distr/stampa	Hoboken, New Jersey : , : Wiley, , 2011
Descrizione fisica	1 online resource (483 p.)
Disciplina	720.47 720/.47
Collana	RSMeans
Soggetto topico	Sustainable construction Sustainable buildings - Design and construction Building - Estimates
Soggetto genere / forma	Electronic books.
ISBN	1-118-03003-6 1-118-98404-8 1-282-93975-0 9786612939754 1-118-00075-7
Formato	Materiale a stampa
Livello bibliografico	Monografia
Lingua di pubblicazione	eng
Nota di contenuto	Machine generated contents note: Acknowledgments. -- About the Contributors. -- Foreword. -- Introduction. -- Part 1: Green Building Concepts. -- Chapter 1: Green Building Approaches. -- Resource Effi ciency. -- Demolition/Construction Practices. -- Recycling. -- Environmental Sensitivity. -- Water/Landscape. -- Sewage Treatment. -- Designing for People: Health & Productivity. -- Green Building Hurdles. -- Conclusion. -- Chapter 2: Introduction to Green Building Materials & Systems. -- Green Material Alternatives by CSI Division. -- Alternative Materials. -- Conclusion. -- Chapter 3: Building Deconstruction. -- What Exactly is Deconstruction? -- Who Performs Deconstruction? -- The Deconstruction Process. -- Economic Benefits. -- Cost Considerations. -- Conclusion. -- Chapter 4: Efficient Use of Energy & Other Resources. -- Understanding Occupants' Needs & Expectations. -- The Building Envelope & Systems Interactions. -- Energy Efficiency Strategies. -- Electrical Power Generation. -- Renewable Energy & Distributed Generation Technologies. -- Water Conservation. -- Conclusion. -- Chapter 5: Solar Energy Systems. -- Background: Energy, Economics, Environment, Health & Security. -- Energy Use in Different Types of Buildings. -- The Solar Resource. -- Passive Solar Heating. -- Cooling Load Avoidance. -- Photovoltaics. -- Solar Water Heating. -- Solar Ventilation Air Heating. -- Conclusion. -- Chapter 6: Wind Power. -- Applications & Concerns: An Overview. -- Other Considerations. -- Basic Criteria for Using a Wind System. -- Small Wind System Components. -- Evaluating the Local Wind Resource. -- Estimating the Cost of Wind Systems. -- Obstacles & Incentives. -- Building Permit Issues. -- Connecting Wind Systems to Utility Grids. -- Conclusion. -- Chapter 7: Health, Comfort & Productivity. -- Indoor Air Quality. -- Thermal Comfort. -- Quality of Light. -- Water Quality. -- Noise Management. -- Furniture & Furnishings. -- Flooring & Wall Finishes. -- Carpeting, Rugs & Mattresses. -- Conclusion. -- Part 2: Designing, Specifying & Commissioning the Green Building. -- Chapter 8: The Green Design Process & Associated Costs. -- Technology & Information Sharing. -- Team Building & Goal Setting. -- Cost of a LEED® Rating. -- The Design Team. -- The Building Program. -- Design Team Selection Criteria. -- Design Team Statement of Work. -- Costs of Energy Modeling. -- Schematic/Preliminary Design. -- Design Development. -- Construction Documents. -- Bid Solicitation & Contract Award. -- Construction. -- Operations & Maintenance. -- Measurement & Verification. -- Establishing a Green Team in an Existing Facility. -- Conclusion. -- Chapter 9: Rating Systems, Standards & Guidelines. -- Whole Building Multiple Attribute Ratings. -- Whole Building Single Attribute Ratings. -- Building Product Labels. -- Measurement & Management Standards. -- Conclusion. -- Chapter 10: Budgeting & Financing Construction. -- Initial Costs. -- Future Costs. -- Low-Cost Green Strategies. -- Cost Estimating Overview. -- Financial Analysis Introduction. -- Financing Options. -- Incentive Programs. -- Conclusion. -- Chapter 11: Specifying Green Products & Materials. -- Building Product Manufacturers & Green Products. -- What Are Green Products? -- Who Selects Green Building Products? -- When Are Green Products Selected? -- A Green Product Checklist. -- Greening Your Firm. -- Conclusion. -- Chapter 12: Commissioning the Green Building. -- The Programming Phase. -- The Design Phase. -- The Construction Phase. -- The Acceptance Phase. -- The Post-Acceptance Phase. -- Conclusion. -- Part 3: Analyzing Economic & Environmental Impacts. -- Chapter 13: Economic Analysis & Green Buildings. -- Economic Efficiency. -- Discounting. -- Study Period. -- Uncertainty & Risk. -- Measures of Economic Evaluation. -- Supplementary Measures of Economic Evaluation. -- Basic Steps in LCC Analysis. -- Selection Criteria for Supplementary Measures. -- Computer-Supported LCC Analysis. -- Conclusion. -- Chapter 14: Evaluating Products Over Their Life Cycle. -- Measuring Environmental Performance. -- Measuring Economic vs Environmental Performance. -- Overall Performance: Economic & Environmental. -- Conclusion. -- Chapter 15: Evaluation, Analysis & Data Tools. -- Building Information Modeling. -- Whole Building Energy Evaluation. -- Energy-10. -- EnergyPlus. -- SPARK. -- HOT3000. -- Green Footstep. -- Building Systems Evaluation. -- Codes & Standards Compliance Evaluation. -- Life Cycle Analysis. -- Case Studies & Databases. -- Creating Project Cost Databases. -- Conclusion. -- Chapter 16: The Greening of Commercial Real Estate. -- The Role of Government. -- Owner/Investor Interests. -- Tenant Expectations. -- Factors Limiting the Adoption of Green. -- Green Investment Instruments. -- Conclusion. -- Part 4: Case Studies. -- Appendix. -- Appendix A: HVAC Equipment Efficiency Tables. -- Appendix B: Additional Information on Standards & Guidelines. -- Resources. -- Glossary. -- Index.
Record Nr.	UNINA-9910132846103321

Pubbl/distr/stampa	Durnten-Zurich : , : Trans Tech Publications, , [2012]
Descrizione fisica	1 online resource (158 p.)
Disciplina	624
Altri autori (Persone)	ZhenyuDu LuBin
Collana	Advanced materials research
Soggetto topico	Sustainable construction Civil engineering - Environmental aspects
Soggetto genere / forma	Electronic books.
ISBN	3-03813-654-9
Formato	Materiale a stampa
Livello bibliografico	Monografia
Lingua di pubblicazione	eng
Nota di contenuto	Green Building and Sustainable Civil Engineering; Preface, Committees and Sponsors; Table of Contents; The Study on High Building Structures Decentralized Vibration Control; Research on Forensic Engineering System of Bridge; Study on Traditional Chinese Architecture; Solar Energy Comprehensive Utilization on Rural Architectural Equipments; Exploration of Construction above Subway Station in Tianjin and Related Theories Study; A Computer-Based Method for Building Design and Construct; The Evaluation on Civil Engineering Construction Sustainable Development Using Grey Relational Analysis Study on the Standardization of Civil Building Heating Design Flow Research on Development and Promotion of the Green Indemnificatory Apartment; Control and Management in the Implementation Phase of the Civil Construction; Applied Research of the Innovation Construction Mode; Green Building and Sustainable Development; Application of State Equation Method for Coupled Hydro-Mechanical Analysis in Dual-Porosity Media; Application of Nano-TiO2 Photocatalysis Technology in Purification Exhaust; The Study on Slope Stability Analysis Based on Finite Element Method Analysis on Application of Chinese Style Elements in Modern Architecture Design and Construction The Study on PF-CaCO3/Fast-Growing Poplar Composite; The Analysis of Design Methods about High-Rise Public Building Energy Saving; Application of Green Energy-Saving Materials in Exhibition Design; Influence of Steel Slag Powder with Different Specific Surface Area on the Properties of Foam Concrete; Report of Experimented on Compressive Strength of Concrete Using Granulated Blast Furnace Slag as Fine Aggregate; The Study on Low-Carbon Building Using Natural Air Condition Solutions to Lateral Critical Buckling Force of Pipeline Based on Energy Method The Ecological Value of Yao-Dong and Potential for Development; A Study on the Application of Agricultural Products and Byproducts in Green Building Materials; Energy Saving Calculation and Analysis of the Rural House in Hohhot; The Research about Energy Saving Reconstruction of the Houses in the Countryside in Inner Mongolia; The Application of Insulated Double-Glass Photovoltaic Module in BIPV; Problems Analysis and Solution of Bridge Pier Displacement in Ning-Tai-Weng Highway with Soft Clay Ground Coastal Building Setback Line Determining Method and ApplicationKeywords Index; Authors Index
Record Nr.	UNINA-9910462780803321

Autore	Jiang Zhengwu
Pubbl/distr/stampa	Gateway East, Singapore : , : Springer, , [2023]
Descrizione fisica	1 online resource (441 pages)
Disciplina	690.0286
Soggetto topico	Sustainable construction Concrete - Environmental aspects
ISBN	9789811963131 9789811963124
Formato	Materiale a stampa
Livello bibliografico	Monografia
Lingua di pubblicazione	eng
Nota di contenuto	Intro -- Preface -- Acknowledgements -- Contents -- About the Author -- 1 Introduction -- 1.1 Concrete -- 1.1.1 Concrete -- 1.1.2 High-Performance Concrete -- 1.1.3 Sustainable Development of Concrete -- 1.2 Aggregate and Manufactured Sand (MS) -- 1.2.1 Aggregate -- 1.2.2 Manufactured Sand -- References -- 2 Production of Manufactured Sand -- 2.1 Production Process of Manufactured Sand -- 2.1.1 Dry Production Process -- 2.1.2 Wet Production Process -- 2.2 Production Equipment -- 2.2.1 Vibrating Feeder -- 2.2.2 Crushing Equipment -- 2.2.3 Fines Removal Equipment -- 2.3 Improvement of Production Technology -- 2.3.1 Production Process Optimization -- 2.3.2 Production Equipment Optimization -- 2.3.3 Slurry Recovery Process -- 2.3.4 Quality Control Measures -- 2.4 Concluding Remarks -- References -- 3 Features of Manufactured Sand -- 3.1 Lithology -- 3.2 Particle Size Distribution and Fines Content -- 3.2.1 Fineness Modulus and Grading -- 3.2.2 Fines Content and Mud Content -- 3.3 Clay Content and MB Values -- 3.3.1 Characterization of Clay Content of MS -- 3.3.2 MB Values of MS -- 3.4 Geometric Features -- 3.4.1 Literature Review -- 3.4.2 Geometric Features of MS -- 3.5 Determination of Specific Surface Area via the Random Section method -- 3.5.1 Theoretical Background -- 3.5.2 Theory Verification -- 3.5.3 Experiment -- 3.5.4 Result Analysis -- References -- 4 Properties and Microstructure of Concrete with Manufactured Sand -- 4.1 Introduction -- 4.2 Fresh Properties -- 4.2.1 Workability -- 4.2.2 Rheological Properties -- 4.3 Mechanical Properties -- 4.3.1 Compressive Strength -- 4.3.2 Elastic Modulus -- 4.3.3 Relationship Between Compressive Strength and Elastic Modulus -- 4.3.4 Positive and Negative Effects of MS -- 4.4 Durability -- 4.4.1 Resistance to Cracking -- 4.4.2 Resistance to Permeability -- 4.4.3 Resistance to Freezing and Thawing. 4.4.4 Resistance to Sulfate Attack -- 4.4.5 Resistance to Acid Attack -- 4.4.6 Dimensional Stability -- 4.4.7 Alkali-Aggregate Reaction -- 4.5 Modeling of Concrete with Manufactured Sand -- 4.5.1 Multi-level Viscosity Model -- 4.5.2 Multi-level Modulus Model -- 4.5.3 Multi-level Diffusion Model -- 4.6 Microstructure of Concrete with Manufactured Sand -- 4.6.1 Hydration -- 4.6.2 Pore Structure -- 4.7 Concluding Remarks -- References -- 5 Mix Design of Concrete with Manufactured Sand -- 5.1 Raw Materials -- 5.1.1 Cement -- 5.1.2 Mineral Admixtures -- 5.1.3 Manufactured Sand -- 5.1.4 Coarse Aggregate -- 5.1.5 Chemical Admixtures -- 5.1.6 Water -- 5.2 Mix Proportioning Methods of High-Performance Concrete -- 5.2.1 Determination of the Concrete Target Mean Strength -- 5.2.2 Calculation of Concrete Mix Proportion -- 5.2.3 Trial, Adjustment, and Determination of Mix Proportion -- 5.2.4 Special Performance Check -- 5.3 Mix Proportioning Methods of Self-Compacting Concrete -- 5.3.1 Blocking Criteria Method -- 5.3.2 ICAR Method -- 5.3.3 Su's Method -- 5.3.4 Densified Mixture Design Algorithm (DMDA) -- 5.3.5 Excessive Paste Theory -- 5.3.6 Packing Model-Based Method -- 5.3.7 Target Grading Method (TG Method) -- 5.4 Mix Design of Concrete Based on Surplus Coefficient of Mortar -- 5.4.1 Technical Route -- 5.4.2 Design Steps -- 5.5 Mix Design Method of Manufactured Sand Concrete Based on Aggregate Shape -- 5.5.1 Mix Design Principle of High-Performance Concrete with Manufactured Sand Based on Aggregate Shape -- 5.5.2 Design Steps for Mix Proportion of High-Performance Concrete with Green Manufactured Sand Based on Aggregate Shape -- 5.6 Optimization of Mix Proportion of Concrete with Manufactured Sand -- 5.6.1 Optimization Technology of Fines -- 5.6.2 Optimization Technology of Manufactured Sand and Coarse Aggregate. 5.6.3 Optimization Technology of Mineral Admixtures -- 5.6.4 Optimization Technology of Additives -- 5.7 Concluding Remarks -- References -- 6 Self-Compacting Concrete with Manufactured Sand -- 6.1 An Overview of Self-Compacting Concrete (SCC) -- 6.2 Pumping Pressure of Concrete with Manufactured Sand -- 6.2.1 Theoretical Prediction of the Pressure Loss of Concrete -- 6.2.2 Establish of Pumping Pressure of Concrete with Manufactured Sand -- 6.2.3 Influence of Manufactured Sand Features on the Pumping Pressure of Concrete -- 6.3 Optimization of Mix Proportion of SCC with Manufactured Sand -- 6.3.1 Design of Mix Proportion of SCC with Manufactured Sand -- 6.3.2 Optimization of Mix Proportion of SCC with Manufactured Sand -- 6.4 Engineering Application of SCC with Manufactured Sand -- 6.4.1 Qingshuihe Bridge -- 6.4.2 Beipanjiang Bridge -- 6.5 Concluding Remarks -- References -- 7 Rock-Filled Concrete with Manufactured Sand -- 7.1 An Overview of RFC -- 7.2 Performance Requirements for Rock -- 7.3 Simulation of Rock Accumulation -- 7.3.1 Algorithm Description -- 7.3.2 Results and Analysis -- 7.4 Mix Design of Superfluid SCC with MS -- 7.4.1 Requirements on the Properties of SFSCC with MS -- 7.4.2 Mix Design Procedures of Superfluid SCC with MS -- 7.4.3 Optimization of Mix Proportion of Superfluid SCC with MS -- 7.5 Properties of RFC with MS -- 7.5.1 Mechanical Properties -- 7.5.2 Durability Performance -- 7.5.3 Drying Shrinkage Behavior of RFC with MS -- 7.5.4 Impermeability of RFC with MS -- 7.5.5 Internal Temperature Rise of RFC with MS -- 7.6 Engineering Application of RFC with MS -- 7.6.1 An Overview of the Bijie-Weining Express Project -- 7.6.2 On-Site Construction of RFC with MS -- 7.6.3 Evaluation of Fresh and Hardened Properties of On-Site RFC with MS -- 7.7 Concluding Remarks -- References. 8 Special High-Performance Concrete with Manufactured Sand -- 8.1 Anti-Disturbance Concrete with MS -- 8.1.1 Raw Materials and Test Methods -- 8.1.2 Results and Analysis -- 8.1.3 Engineering Application -- 8.1.4 Summary -- 8.2 Underwater Anti-Washout Concrete with MS -- 8.2.1 Raw Materials and Test Methods -- 8.2.2 Results and Analysis -- 8.2.3 Engineering Application -- 8.2.4 Summary -- 8.3 Concluding Remarks -- References.
Record Nr.	UNINA-9910627254703321