Best Practices in Geotechnical and Pavement Engineering [[electronic resource] ] : Select Proceedings of IACESD 2023 / / edited by Sreevalsa Kolathayar, N. Vinod Chandra Menon, K. S. Sreekeshava |
Autore | Kolathayar Sreevalsa |
Edizione | [1st ed. 2024.] |
Pubbl/distr/stampa | Singapore : , : Springer Nature Singapore : , : Imprint : Springer, , 2024 |
Descrizione fisica | 1 online resource (425 pages) |
Disciplina | 690 |
Altri autori (Persone) |
Vinod Chandra MenonN
SreekeshavaK. S |
Collana | Lecture Notes in Civil Engineering |
Soggetto topico |
Buildings - Design and construction
Transportation engineering Traffic engineering Geotechnical engineering Building Construction and Design Transportation Technology and Traffic Engineering Geotechnical Engineering and Applied Earth Sciences |
ISBN | 981-9985-05-6 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Best Practices in Geotechnical and Pavement Engineering- An Introduction -- Sustainable Implementation of Standard Geotechnical Practices to Optimize the Foundation Design of a Residential Building a Case Study -- Non Linear Site Response Studies of Shallow Foundation Isolated on Gravel Tire Crumb Mixture Layer on Shallow Bedrock Sites -- Experience in Designing and Calculating Slab Foundations of a Two-section Multi-story Building on Weak Water-saturated Soils -- Experimental and Numerical Analysis for Enhancing Bearing Capacity of Shallow Foundation Through Geotextile Implementation -- Behavior of Piled Raft Foundation of Different Pile Lengths, Pile Diameter and Raft Thickness for a High Rise Building by Using Finite Element Modeling -- Retrofit of Foundations Supporting Structures That Have Undergone Settlement Located in Seismically Active Zones -- Assessment of Stability of Embankments on Soft Ground Using Matsuo Chart and Slope/W -- Experimental Investigation on Interrelation Between Hydraulic Conductivity and Compressive Strength of Soft Soil Using Metakaolin as Stabilizer -- Laboratory Investigation of Soil Stabilization Using Terrazyme and Cement -- A Framework for Geotechnical Engineering Practice & Education Forsterite Treated Silt as a Liner Material -- Evaluating the Influence of Montmorillonite Content on Swelling Behaviour in Relation to Its Plasticity -- 3d Numerical Investigation of Stone Column Simulated in Soft Soil -- Uncertainty of Measurement of Geotechnical Parameters of a Lateritic Soil -- Analysis of Slope Stability for Hill Based Construction in North East India: A Case Study in Guwahati. |
Record Nr. | UNINA-9910805574903321 |
Kolathayar Sreevalsa | ||
Singapore : , : Springer Nature Singapore : , : Imprint : Springer, , 2024 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Betriebliche Risiken in der Nassbaggerei [[electronic resource] /] / von Volker Patzold, Günter Gruhn |
Autore | Patzold Volker |
Edizione | [1st ed. 2016.] |
Pubbl/distr/stampa | Berlin, Heidelberg : , : Springer Berlin Heidelberg : , : Imprint : Springer Spektrum, , 2016 |
Descrizione fisica | 1 online resource (XXII, 212 S. 90 Abb., 60 Abb. in Farbe.) |
Disciplina | 624.151 |
Soggetto topico |
Geotechnical engineering
Hydrogeology Geotechnical Engineering & Applied Earth Sciences |
ISBN | 3-662-49345-4 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | ger |
Nota di contenuto | 1. Wesen der Nassbaggerei -- 2. Betriebsrisiken der Nassbaggerei -- 3. Merkmale und Risiken von Nassbaggern -- 4. Risiken der Leistungsberechnung -- 5. Abschätzung der Baggerleistung -- 6. Risiken in Verdingungsunterlagen -- 7. Risiken bei der Angebotsbearbeitung -- Anhang. |
Record Nr. | UNINA-9910483728103321 |
Patzold Volker | ||
Berlin, Heidelberg : , : Springer Berlin Heidelberg : , : Imprint : Springer Spektrum, , 2016 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Beyond 100: The Next Century in Geodesy [[electronic resource] ] : Proceedings of the IAG General Assembly, Montreal, Canada, July 8-18, 2019 / / edited by Jeffrey T. Freymueller, Laura Sánchez |
Autore | Freymueller Jeffrey T |
Edizione | [1st ed. 2023.] |
Pubbl/distr/stampa | Cham, : Springer Nature, 2023 |
Descrizione fisica | 1 online resource (IX, 286 p. 10 illus.) |
Disciplina | 551 |
Collana | International Association of Geodesy Symposia |
Soggetto topico |
Geology
Geotechnical engineering Geographic information systems Geotechnical Engineering and Applied Earth Sciences Geographical Information System |
Soggetto non controllato |
Earthquakes and Geodynamics
Global Geodetic Observing System Height Reference Systems Mass transport and time-variable gravity Positioning techniques and applications Reference Frames Static Gravity Field of the Earth Remote Sensing/Photogrammetry |
ISBN | 3-031-09857-9 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Part I: Reference Systems and Frames -- Towards an International Height Reference Frame Using Clock Networks -- Towards the realization of the International Height Reference Frame (IHRF) in Argentina -- Comparing Vienna CRF solutions to Gaia-CRF2 -- Co-Location of Space Geodetic Techniques: Studies on Intra-Technique Short Baselines -- Status of IGS Reprocessing Activities at GFZ -- A Wavelet-based Outlier Detection and Noise Component Analysis for GNSS Position Time Series -- Part II: Gravity field modelling -- International Combination Service for Time-variable Gravity Fields (COST-G) – Start of operational phase and future perspectives -- LUH-GRACE2018: a new time series of monthly gravity field solutions from GRACE -- A Precise Geoid Model for Africa: AFRgeo2019 -- Part III: Earth rotation and geodynamics -- A first assessment of the corrections for the consistency of the IAU2000 and IAU2006 precession-nutation models -- Report of the IAU/IAG Joint Working Group on Theory of Earth rotation and validation -- Achievements of the first 4 years of the International Geodynamics and Earth Tide Service (IGETS) 2015 – 2019 -- Inter-comparison of ground gravity and vertical height measurements at collocated IGETS stations -- Part IV: Multi-Signal Positioning, Remote Sensing and Applications -- A Benchmarking Measurement Campaign to Support Ubiquitous Localization in GNSS Denied and Indoor Environments -- A method to correct the raw Doppler observations for GNSS velocity determination -- Assessment of a GNSS/INS/Wi-Fi Tight-Integration Method Using Support Vector Machine and Extended Kalman Filter -- Enhancing navigation in difficult environments with low-cost, dual-frequency GNSS PPP and MEMS IMU -- Part V: Monitoring and Understanding the Dynamic Earth with Geodetic Observations -- Water Depletion and Land Subsidence in Iran using Gravity, GNSS, InSAR and Precise Levelling Data -- Past and future sea level changes and land uplift in the Baltic Sea seen by geodetic observations -- Estimation of Lesser Antilles vertical velocity fields using a GNSS-PPP software comparison -- Time variations of the vertical component in Japanese GEONET GNSS sites -- An approximate method to simulate post-seismic deformations in a realistic Earth model -- Geodetic monitoring of the variable surface 1 deformation in Latin America -- Progress in GTEWS ground displacement measurements and tsunami warning -- Part VI: Geodesy for Atmospheric and Hydrospheric Climate Research (IAG, IAMAS, IACS, IAPSO) -- Characterization of the Upper Atmosphere from Neutral and Electron Density Observations -- Tropospheric products from high-level GNSS processing in Latin America -- Can vertical GPS displacements serve as proxies for climate variability in North America? -- Tracking Hurricanes using GPS atmospheric precipitable water vapor field -- Continuous monitoring with a superconducting gravimeter as a proxy for water storage changes in a mountain catchment -- Least-Squares Spectral and Coherency Analysis of the Zenith Total Delay Time Series at SuomiNet Station SA56 (UNB2). |
Record Nr. | UNINA-9910623994503321 |
Freymueller Jeffrey T | ||
Cham, : Springer Nature, 2023 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Bifurcation and Degradation of Geomaterials in the New Millennium [[electronic resource] ] : Proceedings of the 10th International Workshop on Bifurcation and Degradation in Geomaterials / / edited by Kam-Tim Chau, Jidong Zhao |
Edizione | [1st ed. 2015.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2015 |
Descrizione fisica | 1 online resource (370 p.) |
Disciplina | 624.15136 |
Collana | Springer Series in Geomechanics and Geoengineering |
Soggetto topico |
Ocean engineering
Geotechnical engineering Offshore Engineering Geotechnical Engineering & Applied Earth Sciences |
ISBN | 3-319-13506-6 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Simulations of shear zones and cracks in engineering materials using extended Finite Element Method -- Discrete modelling of micro-structural phenomena in granular shear zones -- Modelling hydromechanical dilation geomaterial - cavitation and localization -- Fabric evolution and its effect on strain localization in sand -- Micro-mechanical observations of strain localization in granular soils during simple shear loading -- Grainsize evolution in open systems -- Numerical modeling of failure process in cohesive geomaterials -- Hydromechanical modelling of an initial boundary value problem: Studies of non-uniqueness with a second gradient continuum -- A FE² model for hydro-mechanical coupling -- Numerical simulation and length scale calibration of micropolar hypoplastic model -- Micromechanical analysis of second order work in granular media -- Stability and bifurcation in reinforced boreholes -- Shear banding in torsion shear tests on cross-anisotropic deposits of fine Nevada sand -- Effects of flooding on crushable sand -- Numerical analysis of 1D seepage failure process of sandy materials by CWENO method -- Mechanisms of deformation in porous rocks at the grain scale -- The influence of fines content on the onset of instability and critical state line of silty sand -- A multiscale investigation of strain localization in cohesionless sand -- The effect of rotational degrees of freedom on the formation of deformation patterns in granular materials using digital image correlation -- Stick-slip motion and the associated frictional instability caused by vertical oscillations -- Investigation of direct shear interface test using micro-polar continuum approach -- Energy criterion of in-plane fracture propagation in geomaterials with rotating particles -- Dynamic instability in geomaterials associated with the presence of negative stiffness elements -- Numerical modeling of particle breaking process in granular materials: compaction and evolution of size distribution -- Onset of strain localization in unsaturated soils subjected to constant water content loading -- Double-scale assessment of micro-mechanics based constitutive models for granular materials undergoing mechanical degradation -- Hypoplastic constitutive modelling of grain damage under plane shearing -- Hierarchy of failure indicators in the failure analysis of geomaterials -- Static liquefaction of granular soils: the role of grain shape and size -- Static liquefaction and instability in granular media subjected to monotonic loading – A micromechanical investigation -- Capillary effect on critical length of force chains in partially saturated granular materials within the pendular regime -- Study on the initiation of strain localization in soils by 3D non-coaxial plasticity -- Micromechanics-based constitutive modeling and DEM simulation of localized failure in soil -- Thermally induced deformation and failure in shale under drained and undrained heating -- Instability of dissociation process of methane hydrate bearing soil -- Development of image analysis tools to evaluate in-situ evolution of the grain size distribution in sand subjected to breakage -- FEMÍDEM multi-scale analysis of boundary value problems involving strain localization -- Evolution of packing structure in cyclic mobility and post-liquefaction of granular soils -- Experimental versus finite element approach to study scale dependent features in granular materials’ stress and deformation fields -- Onset of strain localization in fiber reinforced composites subjected to plane stress loading -- Using shear strain localisation to model the fracturing around gallery in unsaturated Callovo-Oxfordian claystone -- Experimental study on the behavior of a plasticine material -- Thermodynamic analysis of instability in unsaturated soils -- Plastic deformations in granular materials with rotation of principal stress axes -- A framework to assess the controllability of wetting on unsaturated collapsible soils -- Model tensile cracking in soil with coupled meshless-FEM method -- Quantitative observation of strain localisation in a partially saturated triaxial specimen using microfocus X-ray CT with image analysis -- Simple modeling of time-dependent behavior for structured soils -- The role of microstructure in the liquefaction mechanism -- Dense granular flows: structure and microscopic origins of internal friction -- Dynamic analysis of strain localization in water-saturated elasto-viscoplastic material -- Micromechanical modelling of granular materials through fabric and coordination number anisotropies -- Repetitive compression tests on a carbonate sand -- The evolution of shear bands in sand: Numerical investigations based on an elasto-plastic Cosserat continuum approach. |
Record Nr. | UNINA-9910299700303321 |
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2015 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Bifurcation and Degradation of Geomaterials with Engineering Applications [[electronic resource] ] : Proceedings of the 11th International Workshop on Bifurcation and Degradation in Geomaterials dedicated to Hans Muhlhaus, Limassol, Cyprus, 21-25 May 2017 / / edited by Euripides Papamichos, Panos Papanastasiou, Elena Pasternak, Arcady Dyskin |
Edizione | [1st ed. 2017.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2017 |
Descrizione fisica | 1 online resource (XVI, 623 p. 272 illus., 209 illus. in color.) |
Disciplina | 624.15 |
Collana | Springer Series in Geomechanics and Geoengineering |
Soggetto topico |
Engineering geology
Engineering—Geology Foundations Hydraulics Geotechnical engineering Geoengineering, Foundations, Hydraulics Geotechnical Engineering & Applied Earth Sciences |
ISBN | 3-319-56397-1 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Part I. Experimental Modeling of Instabilities Localization and Degradation -- Part II. Constitutive modeling and multi-physical coupling for localization, Instabilities and Degradation of Geomaterials -- Part III Numerical Modeling of Failure, Localized Deformation and Gravity Driven Flows -- Part 4 Soil-tool/Machine Interaction -- Part V Geomechanics for Energy, Environment and Geophysics -- Part VI Micromechanics and Multi-scale Analysis of Instabilities and Degradation -- Part VII Hans Muhlhaus Tribute. |
Record Nr. | UNINA-9910254327103321 |
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2017 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Bodenmanagement in der Praxis [[electronic resource] ] : Vorsorgender und nachsorgender Bodenschutz – Baubegleitung – Bodenschutzrecht / / von Frank-Michael Lange, Hellmuth Mohr, Andreas Lehmann, Jürgen Haaff, Karl Stahr |
Autore | Lange Frank-Michael |
Edizione | [1st ed. 2017.] |
Pubbl/distr/stampa | Wiesbaden : , : Springer Fachmedien Wiesbaden : , : Imprint : Springer Vieweg, , 2017 |
Descrizione fisica | 1 online resource (XXIV, 434 S. 63 Abb. in Farbe.) |
Disciplina |
344.046
363.70561 |
Soggetto topico |
Environmental law
Environmental policy Engineering geology Engineering—Geology Foundations Hydraulics Waste management Soil science Soil conservation Geotechnical engineering Environmental Law/Policy/Ecojustice Geoengineering, Foundations, Hydraulics Waste Management/Waste Technology Soil Science & Conservation Geotechnical Engineering & Applied Earth Sciences |
ISBN | 3-658-10059-1 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | ger |
Nota di contenuto | Altlasten -- Rechtssprechung -- Gesetze Verordnungen -- Erkundung von Altlasten -- Bewertung von Altlasten -- Sanierung von Altlasten -- Normen, technische Regelwerke -- Abfalltechnik -- Rechtsprechung -- Gesetze Verordnungen -- Erkundung -- Bewertung -- Entsorgung -- Normen, technische Regelwerke -- Oberbodenmanagement -- Rechtsprechung -- Gesetze Verordnungen -- Bodenkundliche Erkundung -- Praktisches Bodenmanagement -- Verwertung von Oberboden (Eingriffs-/Ausgleichsregelungen) -- Normen, technische Regelwerke. |
Record Nr. | UNINA-9910484518003321 |
Lange Frank-Michael | ||
Wiesbaden : , : Springer Fachmedien Wiesbaden : , : Imprint : Springer Vieweg, , 2017 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Borehole Acoustic Logging – Theory and Methods [[electronic resource] /] / by Hua Wang, M. Nafi Toksöz, Michael C Fehler |
Autore | Wang Hua |
Edizione | [1st ed. 2020.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2020 |
Descrizione fisica | 1 online resource (XI, 317 p. 308 illus., 156 illus. in color.) |
Disciplina | 622.1592 |
Collana | Petroleum Engineering |
Soggetto topico |
Fossil fuels
Acoustical engineering Geotechnical engineering Fossil Fuels (incl. Carbon Capture) Engineering Acoustics Geotechnical Engineering & Applied Earth Sciences |
ISBN | 3-030-51423-4 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Introduction -- Simulation Methods -- Treatment on the Challenges of Large Material Contrasts for Numerical Simulation -- Advanced Data Processing Method on Array Data -- Wave Propagation in Logging-While-Drilling Environment: Centralized Tool Cases -- The Wavefield of a Multipole Acoustic LWD Tool in Horizontal and Highly Deviated Wells -- A Geosteering Logging Technique: Acoustic Reflection Imaging Method -- Understanding Acoustic Methods for Cement Bond Logging -- Summary. |
Record Nr. | UNINA-9910411932403321 |
Wang Hua | ||
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2020 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Building for the Future: Durable, Sustainable, Resilient [[electronic resource] ] : Proceedings of the fib Symposium 2023 - Volume 2 / / edited by Alper Ilki, Derya Çavunt, Yavuz Selim Çavunt |
Autore | Ilki Alper |
Edizione | [1st ed. 2023.] |
Pubbl/distr/stampa | Cham : , : Springer Nature Switzerland : , : Imprint : Springer, , 2023 |
Descrizione fisica | 1 online resource (1808 pages) |
Disciplina | 624.1834 |
Altri autori (Persone) |
ÇavuntDerya
ÇavuntYavuz Selim |
Collana | Lecture Notes in Civil Engineering |
Soggetto topico |
Concrete
Buildings—Design and construction Building materials Geotechnical engineering Building Construction and Design Structural Materials Geotechnical Engineering and Applied Earth Sciences |
Soggetto non controllato |
Engineering
Technology & Engineering |
ISBN | 3-031-32511-7 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Finite Element Analysis of Hollow Core Floor Subjected to Point Load -- Precast concrete industrial portal frames subjected to simulated fires -- Metallic Dissipaters Made of Conventional and Advanced Materials for Seismic Protection of Structures -- Numerical study on the shear capacity of PC crane beams in uncertain prestressing tendons anchorage conditions -- A Framework for Improving Building Robustness Through Segmentation -- FRP seismic strengthening of infilled RC frames -- The Influence of Shear Crack Angle on FRP Wall Strengthening -- In-situ load testing of a FRC slab-on-piles -- Robotic Concrete Drilling – First Test Results -- Design Innovation of the Liu-Heng Highway Bridge -- Precast bridge deck for railway using HPFRC and UHPFRC. |
Record Nr. | UNINA-9910728949103321 |
Ilki Alper | ||
Cham : , : Springer Nature Switzerland : , : Imprint : Springer, , 2023 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Building for the Future: Durable, Sustainable, Resilient [[electronic resource] ] : Proceedings of the fib Symposium 2023 - Volume 1 / / edited by Alper Ilki, Derya Çavunt, Yavuz Selim Çavunt |
Autore | Ilki Alper |
Edizione | [1st ed. 2023.] |
Pubbl/distr/stampa | Cham : , : Springer Nature Switzerland : , : Imprint : Springer, , 2023 |
Descrizione fisica | 1 online resource (1969 pages) |
Disciplina | 624.1834 |
Altri autori (Persone) |
ÇavuntDerya
ÇavuntYavuz Selim |
Collana | Lecture Notes in Civil Engineering |
Soggetto topico |
Concrete
Building materials Buildings—Design and construction Geotechnical engineering Structural Materials Building Construction and Design Geotechnical Engineering and Applied Earth Sciences |
Soggetto non controllato |
Engineering
Technology & Engineering |
ISBN | 3-031-32519-2 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Intro -- Preface -- Organization -- Keynote Lecturers -- Invited-Theme Lecturers -- Contents -- Keynote Lecturers -- Recent Canadian Developments Related to FRP Reinforcement for Sustainable and Resilient Concrete Structures, Design Codes, and Field Applications in Infrastructures and Buildings -- 1 Introduction -- 2 Latest Updates of Canadian Standards -- 2.1 Canadian Standard on Material Specifications -- 2.2 Canadian Standard on Highway Bridge Design -- 2.3 Canadian Standard on Structural Design of Wastewater Treatment Plants -- 2.4 Canadian Standard on Parking Garages -- 3 Recent Field Applications -- 3.1 Highway Bridges -- 3.2 Parking and Building Structures -- 3.3 Secant Piles -- 3.4 Soft-Eyes -- 4 Conclusions -- References -- The Beauty of Simplicity and Recyclability -- 1 Where Are We Currently? -- 2 Circular Economy -- 3 BIM-Based Approach for Demolition and Dismantling -- 4 Less is More - Recyclability and the Use of Tunnel Excavation Material -- 5 Beauty Depends on Simplicity - A Sustainable Approach -- 6 Conclusion -- References -- 1915 Çanakkale Bridge - Dream to Reality -- 1 Introduction -- 2 Project Information -- 2.1 Location of the Project -- 2.2 Parties of the Project -- 2.3 1915 Çanakkale Bridge Within the World Bridge Inventory -- 3 Characteristics of 1915 Çanakkale Bridge -- 3.1 Design -- 3.2 Aesthetics -- 3.3 General Arrangement -- 3.4 Steel Towers -- 3.5 Tower Foundations - Caissons -- 3.6 Suspension Cables and Hangers -- 3.7 Steel Deck -- 3.8 Anchor Blocks -- 4 Durability -- 4.1 High-Performance Concrete -- 4.2 Dehumidification System -- 4.3 Structural Health Monitoring System (SHMS) -- 5 Conclusions -- References -- Invited-Theme Lecturers -- Development of a QA/QC Methodology for the Construction of Critical Infrastructure Projects Designed Based on Service Life Considerations -- 1 Introduction.
2 Requirements and Quality System for Concrete -- 3 Design of Concrete Mixtures -- 4 Constituent Materials -- 5 Fresh and Hardened Concrete Properties -- 6 Hardening Concrete Properties -- 7 Full Scale Trial Casting -- 8 Simulation for Temperature Development -- 9 Conclusion -- References -- Enhancement of the Efficiency of CFRP Composites in Strengthening Flat and Curved Soffit RC Members -- 1 Introduction -- 2 Anchorage Systems -- 2.1 Spike Anchor -- 2.2 U-wrap Anchors -- 2.3 Patch Anchors -- 2.4 Hybrid Anchors -- 3 Curved Soffit RC Members -- 3.1 Experimental Program -- 3.2 Material Properties -- 3.3 Beam Instrumentation and Testing Procedure -- 3.4 Test Results -- 4 Conclusion -- References -- Demountable Reinforced Concrete Structures - A Way Forward to Minimize Energy and Waste in Construction Industry -- 1 Introduction -- 2 Current Practice in Structural Engineering -- 2.1 Semi-dry Connections of Precast RC Structural Elements -- 3 RC Demountable Dry Connections -- 3.1 Composite Steel Beams and Concrete Slab Demountable Connections -- 3.2 Beam/Column Demountable Connections -- 3.3 Wall/Wall and Column/Column Demountable Connections -- 3.4 Slab/Slab Demountable Connections -- 4 Summary and Conclusions -- References -- Fib MC2020 - A Sustainability-Driven Performance-Based Approach to Design, Execution and Life-Cycle Management of Concrete Structures -- 1 Introduction -- 2 Principles of a Sustainability-Driven Performance-Based Approach to Design, Execution and Life-Cycle Management -- 2.1 Sustainability Framework and Life-Cycle Perspective -- 2.2 Performance-Based Approach Supporting Sustainability -- 3 Principles of Structural Performance Verifications -- 3.1 Risk and Reliability Concepts in Structural Performance Evaluation -- 3.2 Levels-Of-Approximation Approach to Structural Verifications. 3.3 Provisions for Assessment of Existing Structures -- 4 Conclusions -- References -- Towards Earthquake Risk Reduction Solutions: Applications of Composite Materials and Future Challenges -- 1 Introduction -- 2 Innovative Interventions for Seismic Upgrade of RC Existing Structures -- 2.1 Beam Column Joint Strengthening -- 2.2 Repair and Retrofit of Columns -- 2.3 Seismic Protection of Non - Structural Elements -- 3 Conclusions -- References -- Re-Evaluation of Reinforced Concrete Design Code Provisions in Adopting High-Strength Reinforcement -- 1 Introduction -- 2 Moment Redistribution -- 3 Shear Behaviors -- 4 Beam-Column Joints -- 5 Conclusions -- References -- Innovative Retrofitting of RC Structures Using Textile-Reinforced Alkali-Activated or Cement-Based Mortar Overlays: Application in Short Columns -- 1 Introduction -- 2 Materials and Specimens -- 3 Experimental Procedure and Setup -- 4 Results and Discussion -- 5 Analytical Modeling -- 5.1 Shear Capacity Model -- 5.2 Confinement Models -- 5.3 Deformation Capacity Model -- 5.4 Response Prediction of the Experimentally Tested Columns -- 6 Conclusions -- References -- Transfer of Forces Within Repaired/Strengthened RC Elements -- 1 Introduction -- 2 The NTUA Research -- 2.1 Experimental Campaign -- 2.2 Modelling of Interface Behavior -- 3 Key Experimental Findings -- 3.1 Interface Roughness -- 3.2 Long vs. Short Interfaces -- 4 Prediction of Interface Resistance -- 5 Conclusions -- References -- Structural Walls: New Modeling Parameters for Seismic Retrofit -- 1 Introduction -- 2 Failure Mode Classification -- 3 Flexure-Controlled Walls -- 4 Shear-Controlled Walls -- 5 Shear-Friction-Controlled Walls -- 6 Summary -- References -- Concrete and Innovative Materials -- Determination of Prestressing Using Crack Reopening Method -- 1 Introduction -- 2 Experimental Program -- 2.1 Specimens. 2.2 Experimental Program -- 2.3 Prestressing of the Specimens -- 2.4 Material Properties of Concrete -- 3 Numerical Analysis -- 4 Evaluation of Prestressing -- 5 Conclusions -- References -- Floured CaCO3 as Supplementary Cementitious Material in Defined Performance Concrete -- 1 Introduction -- 2 Experimental Procedure -- 3 Results and Discussion -- 3.1 Assessment of the Effect of the Floured Calcite Addition in Concrete Mixtures Without Chemical Admixtures -- 3.2 Assessment of the Effect of the Combined Introduction of CaCO3 and Superplasticizer on the Hardening Kinetics of Concrete at Normal and Elevated Temperatures -- 3.3 Assessment of the Effect of Co-adding of CaCO3 on Concrete Hardening Kinetics at Negative Temperature -- 4 Conclusion -- References -- An Energy Dissipative Double Beam Coupling Beam Equipped with Low Damage Seismic Technology -- 1 Introduction -- 2 Metallic Supplemental Damping -- 2.1 U-Shaped Flexural Plates (UFPs) -- 3 DBCB-M Concept Design -- 4 Design of DBCB-M -- 5 Test Setup and Loading Protocol -- 5.1 Test Setup -- 5.2 Loading Protocol -- 6 DBCB-M Test Results and Comparison with Benchmark Specimen -- 6.1 Shear Force vs Rotation Response -- 6.2 Cracking Pattern -- 6.3 Energy Dissipation -- 7 Discussion -- 8 Conclusion -- References -- Evaluation of Combustion Effect on Biomass Bottom Ash from a Fluidised Bed Power Plant - Sand Substitution on Mortar Application -- 1 Introduction -- 2 Biomass Bottom Ash Characterisation -- 3 Valorisation of Biomass Bottom Ash in Mortars -- 3.1 Mortars Mix Design -- 3.2 Workability, Compressive Strength and Hydration Kinetics of Mortars -- 3.3 Porous Structure of Mortar -- 4 Conclusion -- References -- A System Development Strategy of a Digital Construction for Building Frames -- 1 Introduction -- 2 Target Building Frame -- 3 Reference Case -- 3.1 System Definition -- 3.2 System Goals. 3.3 System Breakdown -- 4 Technology Selection -- 5 Development Strategy -- 6 Conceptual Drawings -- 7 Conclusion -- References -- The Mechanical Effects of Recycled Steel Fiber on Concrete -- 1 Introduction -- 2 Experimental Studies -- 2.1 Materials and Mix Designs -- 2.2 Experimental Studies -- 3 Results -- 3.1 Properties of Fresh Concrete -- 3.2 Compressive Strength Results -- 3.3 Flexural Strength Results -- 4 Conclusions -- References -- Non-linear Analysis of RC and PRC Structures Towards a Maximum Exploitation of the Plastic Reserves of the Materials -- 1 Introduction -- 1.1 The Italian Infrastructure Heritage -- 1.2 Material Non-linearity -- 2 Development of the MEG Ductility Software -- 2.1 Basic Assumptions -- 2.2 Code Development -- 2.3 Software Validation -- 3 Non-linear Sectional Analyses -- 3.1 Rectangular Sections with Hardening Ratio k = 1.15 -- 3.2 Case Study -- 4 Conclusion -- References -- Usability and Suitability of Different Small-Scale Test Setups to Accurately Assess the Shear Strength of the Glue Line in Adhesive Bonded Timber-Concrete-Composite Elements -- 1 Introduction -- 2 Experimental Investigation Parameters -- 2.1 Test-Setups -- 2.2 Materials and Methods -- 3 Experimental Investigation Outcome -- 3.1 Results -- 3.2 Discussion -- 4 Conclusion -- References -- Development of a Simplified Strategy for Topology Optimisation of Reinforced Concrete Beams Using Regular Geometric Shapes -- 1 Introduction -- 2 Methodology -- 2.1 Benchmark Beam Design and Standards -- 3 Optimisation Approach -- 3.1 Abaqus Modelling Strategy -- 3.2 Material Models -- 4 Results and Discussion -- 5 Conclusion -- References -- Assessment of the Bending Behaviour of RC Beams Under Impact Loads with DIC -- 1 Introduction -- 2 Methodology of the Research -- 2.1 Experimental Setup -- 2.2 Beams Material Characterization. 2.3 Numerical Beam Model Definition. |
Record Nr. | UNINA-9910728939203321 |
Ilki Alper | ||
Cham : , : Springer Nature Switzerland : , : Imprint : Springer, , 2023 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Cable Supported Composite Bridges [[electronic resource] /] / by Changyu Shao |
Autore | Shao Changyu |
Edizione | [1st ed. 2023.] |
Pubbl/distr/stampa | Singapore : , : Springer Nature Singapore : , : Imprint : Springer, , 2023 |
Descrizione fisica | 1 online resource (778 pages) |
Disciplina | 624.151 |
Altri autori (Persone) |
ZhangYun
ZhangChunlei WangQian |
Soggetto topico |
Geotechnical engineering
Environmental engineering Civil engineering Transportation engineering Traffic engineering Geology Geotechnical Engineering and Applied Earth Sciences Environmental Civil Engineering Transportation Technology and Traffic Engineering |
ISBN | 981-9932-08-4 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Chapter 1 Introduction -- Chapter 2 Composite Girder (the structure of bridge deck) and its applicability -- Chapter 3 Cable-stayed Bridge with Composite Girder -- Chapter 4 Suspension Bridge with Composite Girder -- Chapter 5 Arch Bridge with Combined Deck (or Composite Girder) -- Chapter 6 Construction -- Chapter 7 Mechanical Performance and Economy of Cable-stayed Bridge with Composite Beam -- Chapter 8 Mechanical Performance and Economics of Suspension Bridge with Composite Girder -- Chapter 9 Prospect -- References -- Index. |
Record Nr. | UNINA-9910735796503321 |
Shao Changyu | ||
Singapore : , : Springer Nature Singapore : , : Imprint : Springer, , 2023 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|