2nd International Conference on Industrial Applications of Adhesives 2022 : Selected Contributions of IAA 2022 / / edited by Lucas F. M. da Silva, Robert D. Adams, Klaus Dilger |
Edizione | [1st ed. 2023.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2023 |
Descrizione fisica | 1 online resource (155 pages) |
Disciplina | 668.3 |
Collana | Proceedings in Engineering Mechanics, Research, Technology and Education |
Soggetto topico |
Mechanical engineering
Chemical engineering Mechanics, Applied Solids Chemical structure Mechanical Engineering Chemical Engineering Solid Mechanics Structure And Bonding |
ISBN | 3-031-11150-8 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Mechanical and Cost Analysis of the Effect of the Addition of Granite Powder Waste on Selected Properties of Cement-lime Plasters -- Mechanical Performance and Economic Analysis of the Addition of Granite Powder and Fly Ash on the Subsurface Properties of Cementitious Floors Cured Under Different Conditions -- Optimization of Plasma-assisted Surface Treatment for Adhesive Bonding via Artificial Intelligence -- Hyperelastic Behaviour of Adhesives and Its Effect on Bonded Joints: An Exploratory Study -- Evaluating the Influence of Short Fiber Reinforced Thermoplastic Composites Produced by Injection Molding on the Stress Distribution in an Adhesively Bonded Joint Using a Multi-Scale Numerical Modeling Approach. |
Record Nr. | UNINA-9910631080903321 |
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2023 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
6th International Conference on Adhesive Bonding 2021 : selected contributions of AB 2021 / / Lucas F. M. da Silva, Robert D. Adams, editors |
Pubbl/distr/stampa | Cham, Switzerland : , : Springer, , [2021] |
Descrizione fisica | 1 online resource (172 pages) |
Disciplina | 668.3 |
Collana | Proceedings in engineering mechanics, research, technology and education |
Soggetto topico | Adhesives |
ISBN | 3-030-87668-3 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Intro -- Preface -- Contents -- Open Assembly Time of Water-Borne Polyvinyl Acetate (PVAc) Wood Adhesives Affected by Various Factors -- 1 Introduction -- 2 Materials and Methods -- 2.1 Adhesive System Characteristics -- 2.2 Experimental Designs -- 2.3 Influence of Temperature on Viscosity -- 2.4 Procedure for Determining the Open Time -- 2.5 Statistical Analyses -- 3 Results and Discussion -- 4 Conclusion -- References -- Engineering Technology and Preparation of Coating Systems Made with Epoxy Resin-Based Bonding Agents Modified with the Addition of Granite Powder Sourced from Quarry Wastes -- 1 Introduction -- 2 Materials and Methods -- 2.1 Concrete Substrate -- 2.2 Waste Granite Powder -- 2.3 Epoxy Resin -- 2.4 Preparation of Coating Systems -- 2.5 Pull-Off Strength Test of Epoxy Resin-Based Bonding Agents -- 3 The Pull-Off Strength Results of the Epoxy Resin Bonding Agent -- 4 Cost-Economic Analysis -- 4.1 Mechanical and Cost Analysis of the Tested Coating -- 5 Conclusions -- References -- Mechanical and Adhesive Properties of Cement-Lime Plasters Modified with Waste Granite Powder -- 1 Introduction -- 2 Materials and Methods -- 2.1 Blend Design of Composites and Sample Preparation -- 2.2 Determination of Consistency of Fresh Mortars -- 2.3 Determination of Volumetric Density of Wet Mortar -- 2.4 Determination of Basic Mechanical Properties of Hardened Mortars -- 2.5 Determination of Adhesion of Hardened Mortars to the Substrate -- 2.6 Water Absorption Test -- 3 Results -- 3.1 Determining the Properties of Fresh Mortars -- 3.2 Determination of Basic Mechanical Properties of Hardened Mortars Modified with Granite Powder -- 3.3 Determination of Adhesion of Hardened Mortars to the Substrate -- 3.4 Water Absorption Test -- 3.5 Comparison of Obrained Results and Literature Review -- 4 Conclusions -- References.
Characterization of Fast Adhesive Curing Reactions-A Novel Experimental Setup -- 1 Introduction -- 1.1 Rheology -- 1.2 Basics of Induction Heating -- 1.3 Adhesive Curing Reactions -- 2 Development of a Novel Experimental Setup -- 2.1 Profile Phase -- 2.2 Concept Phase -- 2.3 Prototype -- 3 Conclusions -- References -- Material Extrusion on Enameled Steel Surfaces -- 1 Introduction -- 1.1 Motivation -- 1.2 Objective -- 2 Experimental Setup -- 2.1 Substrate -- 2.2 Pretreatment and Coating -- 2.3 Material Extrusion -- 2.4 Mechanical Characterization -- 3 Results and Discussion -- 4 Conclusion -- References -- The Effect of the Viscosity and the Contact Angle on the Pull-Off Strength of Epoxy Resin Modified with Waste Granite Powders -- 1 Introduction -- 2 Research Significance -- 3 Materials and Methods -- 3.1 Waste Granite Powders -- 3.2 Epoxy Resin and Mixing Proportions of Epoxy Resin with Waste Granite Powders -- 3.3 Viscosity Measurements -- 3.4 Contact Angle Measurements -- 3.5 Pull-Off Strength Test -- 4 Results and Discussion -- 4.1 Viscosity Measurements Results -- 4.2 Contact Angle Measurements Results -- 4.3 Pull-Off Strength Test Results -- 4.4 Dependence of Viscosity and Contact Angle on Pull-Off Strength -- 5 Conclusions -- References -- Investigation of the Cleaning Effectiveness of Laser Radiation for Improved Adhesion on Glass Dust Contaminated Glass Fiber Reinforced Polyamide 6 -- 1 Introduction -- 2 Materials and Methodology -- 3 Results -- 4 Conclusion -- References -- Structural Bonding of Thin-Walled Magnesium Die Cast Components -- 1 Introduction -- 2 Experimental Details -- 3 Results and Discussion -- 3.1 Influence of the Pretreatment -- 3.2 Influence of the Release Agent -- 3.3 Influence of the Type of Flow -- 3.4 Environmental Testing -- 4 Conclusions -- References. The Behaviour of CFRP Adhesive Joints Under Different Loading Rates -- 1 Introduction -- 2 Experimental Details -- 2.1 Adhesive -- 2.2 Adherends -- 2.3 Joint Geometry -- 2.4 Test Conditions -- 3 Numerical Details -- 3.1 Static Analysis -- 3.2 Impact Analysis -- 4 Results and Discussion -- 4.1 Experimental Results-Static Tests -- 4.2 Experimental Results-Impact Tests -- 4.3 Numerical Joint Strength Prediction -- 5 Conclusions -- References -- Long-Term Resistant Bonding Between Wood and Aluminium Alloy for Hybrid Lightweight Composites -- 1 Introduction -- 2 Material and Methods -- 2.1 Material -- 2.2 Methods -- 3 Results and Discussion -- 3.1 Shear Strength of Single Lap Joints -- 3.2 4-Point Bending Strength -- 4 Conclusion -- References -- Multiaxial Fatigue Life Assessment of Adhesive Joints Based on the Concepts of Critical Planes: Stress-Based Approaches -- 1 Introduction -- 2 Stress-Based Multiaxial Fatigue Models -- 2.1 Critical Plane Concepts -- 2.2 Stress-Based Critical Plane Fatigue Models -- 3 Description of the Experimental Program -- 3.1 Materials and Samples -- 3.2 Test Device and Loading Conditions -- 4 Fatigue Life Prediction Procedure -- 4.1 Finite Element Simulation -- 4.2 Critical Plane Fatigue Models Constants -- 5 Results and Discussion -- 5.1 Finite Element Simulation Results -- 5.2 Fatigue Models Evaluation -- 6 Conclusions -- References. |
Record Nr. | UNISA-996466850203316 |
Cham, Switzerland : , : Springer, , [2021] | ||
![]() | ||
Lo trovi qui: Univ. di Salerno | ||
|
6th International Conference on Adhesive Bonding 2021 : Selected Contributions of AB 2021 / / edited by Lucas F. M. da Silva, Robert D. Adams |
Edizione | [1st ed. 2021.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2021 |
Descrizione fisica | 1 online resource (172 pages) |
Disciplina | 668.3 |
Collana | Proceedings in Engineering Mechanics, Research, Technology and Education |
Soggetto topico |
Materials - Analysis
Mechanics Materials Mechanics, Applied Solids Materials Characterization Technique Classical Mechanics Materials Engineering Solid Mechanics |
ISBN | 3-030-87668-3 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Chapter 1. Open assembly time of water-borne polyvinyl acetate (PVAc) wood adhesives affected by various factors -- Chapter 2. Engineering technology and preparation of coating systems made with epoxy resin-based bonding agents modified with the addition of granite powder sourced from quarry wastes -- Chapter 3. Mechanical and adhesive properties of cement-lime plasters modified with waste granite powder -- Chapter 4. Characterization of fast adhesive curing reactions - A novel experimental setup -- Chapter 5. Material Extrusion on Enameled Steel Surfaces -- Chapter 6. The effect of the viscosity and the contact angle on the pull-off strength of epoxy resin modified with waste granite powders -- Chapter 7. Investigation of the Cleaning Effectiveness of Laser Radiation for Improved Adhesion on Glass Dust Contaminated Glass Fiber Reinforced Polyamide 6 -- Chapter 8. Structural bonding of thin-walled magnesium die cast components -- Chapter 9. The behaviour of CFRP adhesive joints under different loading rates -- Chapter 10. Long-term resistant bonding between wood and aluminium alloy for hybrid lightweight composites -- Chapter 11. Multiaxial fatigue life assessment of adhesive joints based on the concepts of critical planes: Stress-based approaches. |
Record Nr. | UNINA-9910508484403321 |
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2021 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Adhesive Bonding Technology and Testing / / Ana Sofia Queiros Ferreira Barbosa [and four others] |
Autore | Queiros Ferreira Barbosa Ana Sofia |
Pubbl/distr/stampa | Weinheim, Germany : , : WILEY-VCH GmbH, , [2023] |
Descrizione fisica | 1 online resource (208 pages) |
Disciplina | 668.3 |
Soggetto topico |
Adhesives
Adhesives - Testing |
ISBN |
3-527-83802-3
3-527-83800-7 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Cover -- Title Page -- Copyright -- Contents -- Preface -- Chapter 1 Simple Practical Demonstrations -- 1.1 Importance of Loading Mode on Bonded Joint Performance -- 1.1.1 Introduction -- 1.1.2 Equipment -- 1.1.3 Materials -- 1.1.4 Safety Precautions -- 1.1.5 Experimental Procedure -- 1.1.5.1 In Class -- 1.1.5.2 In the Laboratory -- 1.2 Surface Treatments and Methods to Evaluate Surface Energy -- 1.2.1 Introduction -- 1.2.2 Equipment -- 1.2.3 Materials -- 1.2.4 Safety Precautions -- 1.2.5 Experimental Procedure -- 1.2.5.1 In Class -- 1.2.5.2 In Laboratory -- 1.3 Stress Distribution Along the Overlap Length -- 1.3.1 Introduction -- 1.3.2 Equipment -- 1.3.3 Materials -- 1.3.4 Safety Precautions -- 1.3.5 Test Procedure -- 1.4 Visual Identification of Defects in Adhesive Joints -- 1.4.1 Introduction -- 1.4.2 Equipment -- 1.4.3 Materials -- 1.4.4 Safety Precautions -- 1.4.5 Test Procedure -- 1.5 Failure Analysis of Adhesive Joints -- 1.5.1 Introduction -- 1.5.2 Equipment -- 1.5.3 Materials -- 1.5.4 Safety Precautions -- 1.5.5 Test Procedure -- Chapter 2 Production and Testing -- 2.1 Bulk Specimens -- 2.1.1 Introduction -- 2.1.2 Adhesive Pouring Technique -- 2.1.3 Metallic Mold -- 2.1.4 Adhesive Application -- 2.1.5 Curing Procedure -- 2.1.6 Machining Procedure -- 2.1.7 Testing Procedure -- 2.2 Thick Adherend Shear Specimens -- 2.2.1 Introduction -- 2.2.2 Metallic Mold -- 2.2.3 Surface Treatment of Adherends -- 2.2.4 Geometrical Control Using Shims -- 2.2.5 Specimen Manufacture -- 2.2.6 Final Specimen Preparation -- 2.2.7 Testing Procedure -- 2.3 Fracture Mechanics Specimens -- 2.3.1 Introduction -- 2.3.2 Metallic Mold -- 2.3.3 Surface Treatment of Adherends -- 2.3.4 Adhesive Spacers -- 2.3.5 Specimen Manufacture -- 2.3.6 Final Preparation of Specimens -- 2.3.7 Testing Procedure -- 2.3.8 Data Reduction Schemes -- 2.4 Single‐Lap Joint Specimens.
2.4.1 Introduction -- 2.4.2 Surface Treatment of Adherends -- 2.4.3 Joint Manufacture -- 2.4.4 Final Preparation of Specimens -- 2.4.5 Testing Procedure -- Chapter 3 Laboratorial Activities and Report Examples -- 3.1 Effect of Surface Treatment on the Mechanical Behavior of Adhesively Bonded Joints -- 3.1.1 Introduction -- 3.1.1.1 Joint Strength Prediction -- 3.1.2 Work Description -- 3.1.3 Materials -- 3.1.3.1 Adherends (Tables and ) -- 3.1.3.2 Adhesive (Table ) -- 3.1.4 Experimental Work -- 3.1.5 Report -- 3.1.5.1 Introduction -- 3.1.5.2 Experimental Procedure -- 3.1.5.3 Materials -- 3.1.5.4 Failure Load Prediction -- 3.1.5.5 Experimental Results and Discussion -- 3.1.5.6 Conclusions -- 3.2 Effect of Adhesive Type and Overlap Length on the Failure Load of Adhesively Bonded Joints -- 3.2.1 Introduction -- 3.2.2 Work Description -- 3.2.3 Materials -- 3.2.3.1 Adherends -- 3.2.3.2 Adhesives (Table ) -- 3.2.4 Experimental Work -- 3.2.5 Report -- 3.2.5.1 Introduction -- 3.2.5.2 Materials -- 3.2.5.3 Prediction of the Failure Loads -- 3.2.5.4 Experimental Results -- 3.2.5.5 Discussion -- 3.2.5.6 Conclusions -- 3.3 Effect of Adhesive Thickness on the Failure Load of Adhesively Bonded Joints -- 3.3.1 Introduction -- 3.3.2 Work Description -- 3.3.3 Materials -- 3.3.3.1 Adherends: -- 3.3.3.2 Adhesives: -- 3.3.4 Experimental Work -- 3.3.5 Report -- 3.3.5.1 Introduction -- 3.3.5.2 Experimental Details -- 3.3.5.3 Prediction -- 3.3.5.4 Experimental Results -- 3.3.5.5 Failure Surfaces -- 3.3.5.6 Conclusion -- 3.4 Effect of Overlap Length on the Strength and Failure Mechanism of Composite Adhesive Joints -- 3.4.1 Introduction -- 3.4.2 Work Description -- 3.4.3 Materials -- 3.4.3.1 Adherends: -- 3.4.3.2 Adhesives (Table ) -- 3.4.4 Experimental Work -- 3.4.5 Report -- 3.4.5.1 Introduction -- 3.4.5.2 Characterization of the Tested Joints. 3.4.5.3 Theoretical Prediction of Failure Load -- 3.4.5.4 Comparison with Experimental Results -- 3.4.5.5 Conclusions -- 3.5 Modeling a Single‐Lap Joint Using Finite Element Analysis and Cohesive Zone Modeling -- 3.5.1 Introduction -- 3.5.2 Work Description -- 3.5.3 Materials -- 3.5.3.1 Adherends: -- 3.5.3.2 Adhesives (Table ) -- 3.5.4 Modeling Procedure -- 3.5.5 Report -- 3.5.5.1 Introduction -- 3.5.5.2 Module/Part -- 3.5.5.3 Module/Property -- 3.5.5.4 Module/Section -- 3.5.5.5 Module/Step (First Phase) -- 3.5.5.6 Module/Load -- 3.5.5.7 Module/Mesh -- 3.5.5.8 Module/Step (Second Phase) -- 3.5.5.9 Module/Job -- 3.5.5.10 Module/Visualization -- 3.6 Case Study in Joint Design for a Structural Automotive Application -- 3.6.1 Introduction -- 3.6.2 Report -- 3.6.2.1 Introduction -- 3.6.2.2 Design Brief -- 3.6.2.3 Adhesive Selection -- 3.6.2.4 Surface Treatment Selection -- 3.6.2.5 Material Properties -- 3.6.2.6 Joint Design -- 3.6.2.7 Numerical Models -- 3.6.2.8 Design Validation -- 3.6.2.9 Design for Manufacturing -- 3.6.2.10 Quality Control Techniques -- 3.6.2.11 Health and Safety Concerns -- References -- Chapter 4 Essay and Multi‐choice Questions -- 4.1 Essay Questions -- 4.2 Multi‐choice Questions -- Solutions -- Essay Questions - Example Answers -- Multi-choice Questions - Solutions -- Index -- EULA. |
Record Nr. | UNINA-9910829818903321 |
Queiros Ferreira Barbosa Ana Sofia
![]() |
||
Weinheim, Germany : , : WILEY-VCH GmbH, , [2023] | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Adhesives : Applications and Properties / / edited by Anna Rudawska |
Autore | Anna Rudawska |
Pubbl/distr/stampa | IntechOpen, 2016 |
Descrizione fisica | 1 online resource (398 pages) : illustrations |
Disciplina | 668.3 |
Soggetto topico | Adhesives, Hot melt |
Soggetto non controllato |
Physical Sciences
Engineering and Technology Materials Science Biochemistry Polymers |
ISBN |
953-51-4148-1
953-51-2784-5 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Altri titoli varianti |
Adhesives
Adhesives - Applications and Properties |
Record Nr. | UNINA-9910169208603321 |
Anna Rudawska
![]() |
||
IntechOpen, 2016 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Adhesives & sealants industry |
Pubbl/distr/stampa | Troy, MI : , : Business News Pub. Co., , [1994]- |
Disciplina |
668.3
668/.3 |
Soggetto topico |
Adhesives
Sealing compounds |
Soggetto genere / forma | Periodicals. |
ISSN | 2328-1049 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Periodico |
Lingua di pubblicazione | eng |
Altri titoli varianti | Adhesives and sealants industry |
Record Nr. | UNINA-9910339523603321 |
Troy, MI : , : Business News Pub. Co., , [1994]- | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Adhesives & sealants industry |
Pubbl/distr/stampa | Troy, MI : , : Business News Pub. Co., , [1994]- |
Disciplina |
668.3
668/.3 |
Soggetto topico |
Adhesives
Sealing compounds |
Soggetto genere / forma | Periodicals. |
ISSN | 2328-1049 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Periodico |
Lingua di pubblicazione | eng |
Altri titoli varianti | Adhesives and sealants industry |
Record Nr. | UNISA-996199536103316 |
Troy, MI : , : Business News Pub. Co., , [1994]- | ||
![]() | ||
Lo trovi qui: Univ. di Salerno | ||
|
Adhesives and adhesive joints in industry applications / / edited by Anna Rudawska |
Pubbl/distr/stampa | London, England : , : IntechOpen, , [2019] |
Descrizione fisica | 1 online resource (117 pages) : illustrations |
Disciplina | 668.3 |
Soggetto topico | Adhesives |
ISBN | 1-78984-899-7 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Record Nr. | UNINA-9910353352403321 |
London, England : , : IntechOpen, , [2019] | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Adhesives and adhesive tapes / / Gerhard Gierenz, Werner Karmann, (editors) |
Pubbl/distr/stampa | Weinheim, [Germany] : , : Wiley-VCH, , 2001 |
Descrizione fisica | 1 online resource (148 p.) |
Disciplina |
668.3
668/.3 |
Soggetto topico | Adhesives |
Soggetto genere / forma | Electronic books. |
ISBN |
1-281-84244-3
9786611842444 3-527-61280-7 3-527-61281-5 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Adhesives and Adhesive Tapes; Contents; 1. Adhesives; 1.1. Introduction; 1.2. Adhesion Theories; 1.3. Definitions; 1.4. Raw Materials for Adhesives; 1.5. Classification of Adhesives; 1.6. Individual Adhesive Systems; 1.6.1. Adhesives That Set Without a Chemical Reaction; 1.6.1.1. Solvent-Free Adhesive Systems; 1.6.1.2. Adhesive Solutions from Which the Solvents Escape before Bonding; 1.6.1.3. Adhesive Solutions from Which the Solvents Evaporate during Bonding; 1.6.1.4. Aqueous Emulsions of Polymeric Compounds; 1.6.2. Adhesives Setting by Chemical Reaction
1.6.2.1. Adhesives Setting by Polymerization1.6.2.2. Adhesives Setting by Polyaddition; 1.6.2.3. Adhesives Setting by Polycondensation; 1.6.2.4. Vulcanizing Adhesives; 1.6.2.5. Ultraviolet/Electron Beam (UV/EB) Curing Adhesives; 1.6.2.6. Conductive Adhesives; 1.7. Bonding Techniques; 1.8. Testing of Adhesives; 1.9. Applications of Adhesives; 1.9.1. Bookbinding; 1.9.2. Adhesives for Packaging and Packaging Materials; 1.9.3. Nonwovens Hygiene Industry; 1.9.4. Hygienic Papers; 1.9.5. Gluing of Wood and Wooden Materials; 1.9.6. Footwear Adhesives; 1.9.7. Bonding of Plastics 1.9.8. Bonding of Elastomers1.9.8.1. Adhesion of Rubber; 1.9.8.2. Bonding of Rubber; 1.9.9. Bonding of Metals; 1.9.10. Adhesives for Wallcoverings; 1.9.11. Floorcovering Adhesives; 1.9.12. Building Construction Adhesives; 1.9.13. Adhesives for Bonding Textile Fabrics; 1.9.14. Flocking Adhesives; 1.9.15. Adhesives for Bonding Glass; 1.9.16. Adhesives in Automobile Manufacture; 1.9.17. Adhesives in Aircraft Construction; 1.9.18. Adhesives and Sealants in Electronics; 1.9.19. Medical Adhesives; 1.9.20. Household Adhesives; 1.9.21. Applications of Anaerobic Adhesives; 1.10. Economic Aspects 2. Adhesive Tapes2.1. Introduction; 2.2. Pressure-Sensitive Adhesion; 2.2.1. Mechanism of Pressure-Sensitive Adhesion; 2.2.2. Dynamic Mechanical Analysis; 2.3. Test Methods; 2.4. Raw Materials; 2.4.1. Elastomers; 2.4.2. Tackifier Resins; 2.4.3. Plasticizers; 2.4.4. Fillers; 2.4.5. Stabilizers; 2.4.6. Release Coatings; 2.5. Manufacturing Processes; 2.5.1. Compounding; 2.5.2. Coating; 2.5.3. Drying; 2.5.4. Cross-linking/ Curing; 2.5.5. Slitting, Cutting; 2.6. Adhesive Tape Products; 2.6.1. One-sided Adhesive Tapes; 2.6.1.1. Film Tapes; 2.6.1.2. Fiber-Reinforced Tapes; 2.6.1.3. Paper Tapes 2.6.1.4. Textile Tapes2.6.1.5. Other Backings; 2.6.1.6. Electrical Tapes; 2.6.2. Double-Sided Adhesive Tapes; 2.6.2.1. Standard Double-Sided Tapes; 2.6.2.2. Transfer Tapes; 2.6.2.3. Adhesive Pads and Strips; 2.6.2.4. High-Performance Tapes; 2.6.3. Medical Tapes; 2.7. References; Subject index |
Record Nr. | UNINA-9910144328503321 |
Weinheim, [Germany] : , : Wiley-VCH, , 2001 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Adhesives and adhesive tapes / / Gerhard Gierenz, Werner Karmann, (editors) |
Pubbl/distr/stampa | Weinheim, [Germany] : , : Wiley-VCH, , 2001 |
Descrizione fisica | 1 online resource (148 p.) |
Disciplina |
668.3
668/.3 |
Soggetto topico | Adhesives |
ISBN |
1-281-84244-3
9786611842444 3-527-61280-7 3-527-61281-5 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Adhesives and Adhesive Tapes; Contents; 1. Adhesives; 1.1. Introduction; 1.2. Adhesion Theories; 1.3. Definitions; 1.4. Raw Materials for Adhesives; 1.5. Classification of Adhesives; 1.6. Individual Adhesive Systems; 1.6.1. Adhesives That Set Without a Chemical Reaction; 1.6.1.1. Solvent-Free Adhesive Systems; 1.6.1.2. Adhesive Solutions from Which the Solvents Escape before Bonding; 1.6.1.3. Adhesive Solutions from Which the Solvents Evaporate during Bonding; 1.6.1.4. Aqueous Emulsions of Polymeric Compounds; 1.6.2. Adhesives Setting by Chemical Reaction
1.6.2.1. Adhesives Setting by Polymerization1.6.2.2. Adhesives Setting by Polyaddition; 1.6.2.3. Adhesives Setting by Polycondensation; 1.6.2.4. Vulcanizing Adhesives; 1.6.2.5. Ultraviolet/Electron Beam (UV/EB) Curing Adhesives; 1.6.2.6. Conductive Adhesives; 1.7. Bonding Techniques; 1.8. Testing of Adhesives; 1.9. Applications of Adhesives; 1.9.1. Bookbinding; 1.9.2. Adhesives for Packaging and Packaging Materials; 1.9.3. Nonwovens Hygiene Industry; 1.9.4. Hygienic Papers; 1.9.5. Gluing of Wood and Wooden Materials; 1.9.6. Footwear Adhesives; 1.9.7. Bonding of Plastics 1.9.8. Bonding of Elastomers1.9.8.1. Adhesion of Rubber; 1.9.8.2. Bonding of Rubber; 1.9.9. Bonding of Metals; 1.9.10. Adhesives for Wallcoverings; 1.9.11. Floorcovering Adhesives; 1.9.12. Building Construction Adhesives; 1.9.13. Adhesives for Bonding Textile Fabrics; 1.9.14. Flocking Adhesives; 1.9.15. Adhesives for Bonding Glass; 1.9.16. Adhesives in Automobile Manufacture; 1.9.17. Adhesives in Aircraft Construction; 1.9.18. Adhesives and Sealants in Electronics; 1.9.19. Medical Adhesives; 1.9.20. Household Adhesives; 1.9.21. Applications of Anaerobic Adhesives; 1.10. Economic Aspects 2. Adhesive Tapes2.1. Introduction; 2.2. Pressure-Sensitive Adhesion; 2.2.1. Mechanism of Pressure-Sensitive Adhesion; 2.2.2. Dynamic Mechanical Analysis; 2.3. Test Methods; 2.4. Raw Materials; 2.4.1. Elastomers; 2.4.2. Tackifier Resins; 2.4.3. Plasticizers; 2.4.4. Fillers; 2.4.5. Stabilizers; 2.4.6. Release Coatings; 2.5. Manufacturing Processes; 2.5.1. Compounding; 2.5.2. Coating; 2.5.3. Drying; 2.5.4. Cross-linking/ Curing; 2.5.5. Slitting, Cutting; 2.6. Adhesive Tape Products; 2.6.1. One-sided Adhesive Tapes; 2.6.1.1. Film Tapes; 2.6.1.2. Fiber-Reinforced Tapes; 2.6.1.3. Paper Tapes 2.6.1.4. Textile Tapes2.6.1.5. Other Backings; 2.6.1.6. Electrical Tapes; 2.6.2. Double-Sided Adhesive Tapes; 2.6.2.1. Standard Double-Sided Tapes; 2.6.2.2. Transfer Tapes; 2.6.2.3. Adhesive Pads and Strips; 2.6.2.4. High-Performance Tapes; 2.6.3. Medical Tapes; 2.7. References; Subject index |
Record Nr. | UNINA-9910830719103321 |
Weinheim, [Germany] : , : Wiley-VCH, , 2001 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|