Advances in ceramic armor [[electronic resource] ] : a collection of papers presented at the 29th International Conference on Advanced Ceramics and Composites, January 23-28, 2005, Cocoa Beach, Florida / / editor, Jeffrey J. Swab ; general editors, Dongming Zhu, Waltraud M. Kriven |
Pubbl/distr/stampa | Westerville, Ohio, : American Ceramic Society, c2005 |
Descrizione fisica | 1 online resource (312 p.) |
Disciplina |
620.14
623.7/4 |
Altri autori (Persone) |
SwabJeffrey J
ZhuDongming KrivenWaltraud M |
Collana | Ceramic engineering and science proceedings |
Soggetto topico |
Armor
Ceramic materials Composite materials |
Soggetto genere / forma | Electronic books. |
ISBN |
1-282-31304-5
9786612313042 0-470-29127-3 0-470-29166-4 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advances in Ceramic Armor; Contents; Preface; Impact and Penetration Modeling; Some Observations on the Strength of Failed Ceramic; Modeling Dynamically Impacted Ceramic Material Experiments; Modeling Spherical Indentation Experiments onto Silicon Carbide; Analysis of Time-Resolved Penetration of Long Rods into Glass Targets; A Constitutive Model for Damaged and Powder Silicon Carbide; Designs and Simulations of Ballistic-Resistant MetaVCeramic Sandwich Structures; Considerations on Incorporating XCT into Predictive Modeling of Impact Damage in Armor Ceramics
Failure Wave Propagation in Brittle SubstancesFabrication and Simulation of Random and Periodic Macrostructures; Dynamic and Static Testing to Predict Performance; The Correlation of Microstructural and Mechanical Characteristics of Silicon Carbide with Ballistic Performance; High Strain Rate Compression Testing of Ceramics and Ceramic Composites; Recent Advancements in Split Hopkinson Pressure Bar (SHPB) Technique for Small Strain Measurements; Compression Testing and Response of Sic-N Ceramics: Intact, Damaged and Powder; Damage Effects on the Dynamic Response of Hot-Pressed Sic-N Effects of Porosity Distribution on the Dynamic Behavior of SicEffect of Room-Temperature Hardness and Toughness on the Ballistic Performance of Sic-Based Ceramics; The Penetration of Armor Piercing Projectiles through Reaction BondedCeramics; The Effective Hardness of Hot Pressed Boron Carbide with Increasing Shock stress; Hardness and Hardness Determination in Silicon Carbide Materials; Damage Characterization: Observations, Mechanisms, and Implications; Sphere Impact Induced Damage in Ceramics: I. Armor-Grade SiCandTiB2; Sphere Impact Induced Damage in Ceramics: 11. Amor-Grade B4C and WC Sphere Impact Induced Damage in Ceramics: III AnalysisA Comparison of Ceramic Materials Dynamically Impacted by Tungsten Carbide Spheres; Non-Destructive Evaluation; Ultrasonic Techniques for Evaluation of SIC Armor Tile; Non-Destructive Evaluation (NDE) of Ceramic Armor. Fundamentals; Non-Destructive Evaluation (NDE) of Ceramic Armor: Testing; On Non-Destructive Evaluation Techniques for Ballistic Impact Damage in Armor Ceramics; Novel Material Concepts; Static and Dynamic Fracture Behavior of Layered Alumina Ceramics; Processing and Ballistic Performance of A120flB2 Composites Tactical Vehicle Armor Systems that Utilize Large, Complex-Shaped Reaction Bonded Ceramic TilesMeans of Using Advance Processing to Eliminate Anomalous Defects on SIC Armor; Ballistic Properties of Pressureless Sintered SiCmb Composites; Improved Ballistic Performance by Using a Polymer Matrix Composite Facing on Boron Carbide Armor Titles; Analysis of Scattering Sites in Transparent Magnesium Aluminate Spinel; Author Index |
Record Nr. | UNINA-9910144849003321 |
Westerville, Ohio, : American Ceramic Society, c2005 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advances in ceramic armor [[electronic resource] ] : a collection of papers presented at the 29th International Conference on Advanced Ceramics and Composites, January 23-28, 2005, Cocoa Beach, Florida / / editor, Jeffrey J. Swab ; general editors, Dongming Zhu, Waltraud M. Kriven |
Pubbl/distr/stampa | Westerville, Ohio, : American Ceramic Society, c2005 |
Descrizione fisica | 1 online resource (312 p.) |
Disciplina |
620.14
623.7/4 |
Altri autori (Persone) |
SwabJeffrey J
ZhuDongming KrivenWaltraud M |
Collana | Ceramic engineering and science proceedings |
Soggetto topico |
Armor
Ceramic materials Composite materials |
ISBN |
1-282-31304-5
9786612313042 0-470-29127-3 0-470-29166-4 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advances in Ceramic Armor; Contents; Preface; Impact and Penetration Modeling; Some Observations on the Strength of Failed Ceramic; Modeling Dynamically Impacted Ceramic Material Experiments; Modeling Spherical Indentation Experiments onto Silicon Carbide; Analysis of Time-Resolved Penetration of Long Rods into Glass Targets; A Constitutive Model for Damaged and Powder Silicon Carbide; Designs and Simulations of Ballistic-Resistant MetaVCeramic Sandwich Structures; Considerations on Incorporating XCT into Predictive Modeling of Impact Damage in Armor Ceramics
Failure Wave Propagation in Brittle SubstancesFabrication and Simulation of Random and Periodic Macrostructures; Dynamic and Static Testing to Predict Performance; The Correlation of Microstructural and Mechanical Characteristics of Silicon Carbide with Ballistic Performance; High Strain Rate Compression Testing of Ceramics and Ceramic Composites; Recent Advancements in Split Hopkinson Pressure Bar (SHPB) Technique for Small Strain Measurements; Compression Testing and Response of Sic-N Ceramics: Intact, Damaged and Powder; Damage Effects on the Dynamic Response of Hot-Pressed Sic-N Effects of Porosity Distribution on the Dynamic Behavior of SicEffect of Room-Temperature Hardness and Toughness on the Ballistic Performance of Sic-Based Ceramics; The Penetration of Armor Piercing Projectiles through Reaction BondedCeramics; The Effective Hardness of Hot Pressed Boron Carbide with Increasing Shock stress; Hardness and Hardness Determination in Silicon Carbide Materials; Damage Characterization: Observations, Mechanisms, and Implications; Sphere Impact Induced Damage in Ceramics: I. Armor-Grade SiCandTiB2; Sphere Impact Induced Damage in Ceramics: 11. Amor-Grade B4C and WC Sphere Impact Induced Damage in Ceramics: III AnalysisA Comparison of Ceramic Materials Dynamically Impacted by Tungsten Carbide Spheres; Non-Destructive Evaluation; Ultrasonic Techniques for Evaluation of SIC Armor Tile; Non-Destructive Evaluation (NDE) of Ceramic Armor. Fundamentals; Non-Destructive Evaluation (NDE) of Ceramic Armor: Testing; On Non-Destructive Evaluation Techniques for Ballistic Impact Damage in Armor Ceramics; Novel Material Concepts; Static and Dynamic Fracture Behavior of Layered Alumina Ceramics; Processing and Ballistic Performance of A120flB2 Composites Tactical Vehicle Armor Systems that Utilize Large, Complex-Shaped Reaction Bonded Ceramic TilesMeans of Using Advance Processing to Eliminate Anomalous Defects on SIC Armor; Ballistic Properties of Pressureless Sintered SiCmb Composites; Improved Ballistic Performance by Using a Polymer Matrix Composite Facing on Boron Carbide Armor Titles; Analysis of Scattering Sites in Transparent Magnesium Aluminate Spinel; Author Index |
Record Nr. | UNISA-996209751603316 |
Westerville, Ohio, : American Ceramic Society, c2005 | ||
![]() | ||
Lo trovi qui: Univ. di Salerno | ||
|
Advances in ceramic armor [[electronic resource] ] : a collection of papers presented at the 29th International Conference on Advanced Ceramics and Composites, January 23-28, 2005, Cocoa Beach, Florida / / editor, Jeffrey J. Swab ; general editors, Dongming Zhu, Waltraud M. Kriven |
Pubbl/distr/stampa | Westerville, Ohio, : American Ceramic Society, c2005 |
Descrizione fisica | 1 online resource (312 p.) |
Disciplina |
620.14
623.7/4 |
Altri autori (Persone) |
SwabJeffrey J
ZhuDongming KrivenWaltraud M |
Collana | Ceramic engineering and science proceedings |
Soggetto topico |
Armor
Ceramic materials Composite materials |
ISBN |
1-282-31304-5
9786612313042 0-470-29127-3 0-470-29166-4 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advances in Ceramic Armor; Contents; Preface; Impact and Penetration Modeling; Some Observations on the Strength of Failed Ceramic; Modeling Dynamically Impacted Ceramic Material Experiments; Modeling Spherical Indentation Experiments onto Silicon Carbide; Analysis of Time-Resolved Penetration of Long Rods into Glass Targets; A Constitutive Model for Damaged and Powder Silicon Carbide; Designs and Simulations of Ballistic-Resistant MetaVCeramic Sandwich Structures; Considerations on Incorporating XCT into Predictive Modeling of Impact Damage in Armor Ceramics
Failure Wave Propagation in Brittle SubstancesFabrication and Simulation of Random and Periodic Macrostructures; Dynamic and Static Testing to Predict Performance; The Correlation of Microstructural and Mechanical Characteristics of Silicon Carbide with Ballistic Performance; High Strain Rate Compression Testing of Ceramics and Ceramic Composites; Recent Advancements in Split Hopkinson Pressure Bar (SHPB) Technique for Small Strain Measurements; Compression Testing and Response of Sic-N Ceramics: Intact, Damaged and Powder; Damage Effects on the Dynamic Response of Hot-Pressed Sic-N Effects of Porosity Distribution on the Dynamic Behavior of SicEffect of Room-Temperature Hardness and Toughness on the Ballistic Performance of Sic-Based Ceramics; The Penetration of Armor Piercing Projectiles through Reaction BondedCeramics; The Effective Hardness of Hot Pressed Boron Carbide with Increasing Shock stress; Hardness and Hardness Determination in Silicon Carbide Materials; Damage Characterization: Observations, Mechanisms, and Implications; Sphere Impact Induced Damage in Ceramics: I. Armor-Grade SiCandTiB2; Sphere Impact Induced Damage in Ceramics: 11. Amor-Grade B4C and WC Sphere Impact Induced Damage in Ceramics: III AnalysisA Comparison of Ceramic Materials Dynamically Impacted by Tungsten Carbide Spheres; Non-Destructive Evaluation; Ultrasonic Techniques for Evaluation of SIC Armor Tile; Non-Destructive Evaluation (NDE) of Ceramic Armor. Fundamentals; Non-Destructive Evaluation (NDE) of Ceramic Armor: Testing; On Non-Destructive Evaluation Techniques for Ballistic Impact Damage in Armor Ceramics; Novel Material Concepts; Static and Dynamic Fracture Behavior of Layered Alumina Ceramics; Processing and Ballistic Performance of A120flB2 Composites Tactical Vehicle Armor Systems that Utilize Large, Complex-Shaped Reaction Bonded Ceramic TilesMeans of Using Advance Processing to Eliminate Anomalous Defects on SIC Armor; Ballistic Properties of Pressureless Sintered SiCmb Composites; Improved Ballistic Performance by Using a Polymer Matrix Composite Facing on Boron Carbide Armor Titles; Analysis of Scattering Sites in Transparent Magnesium Aluminate Spinel; Author Index |
Record Nr. | UNINA-9910830001903321 |
Westerville, Ohio, : American Ceramic Society, c2005 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advances in ceramic armor II [[electronic resource] ] : a collection of papers presented at the 30th International Conference on Advanced Ceramics and Composites, January 22-27, 2006, Cocoa Beach, Florida / / editor, Lisa Prokurat Franks; general editors, Andrew Wereszczak, Edgar Lara-Curzio |
Pubbl/distr/stampa | Hoboken, NJ, : Wiley, c2007 |
Descrizione fisica | 1 online resource (276 p.) |
Disciplina |
620.14
623.7/4 |
Altri autori (Persone) |
Prokurat FranksLisa
WereszczakAndrew Lara-CurzioEdgar <1963-> |
Collana | Ceramic engineering and science proceedings |
Soggetto topico |
Armor
Ceramic materials Composite materials |
Soggetto genere / forma | Electronic books. |
ISBN |
1-282-31412-2
9786612314124 0-470-29136-2 0-470-29178-8 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advances in Ceramic Armor II; Contents; Preface; Introduction; A Review of Computational Ceramic Armor Modeling; Biomorphic SiSiC-Materials for Lightweight Armour; Evaluation of Sic Armor Tile Using Ultrasonic Techniques; Spherical Indentation of Sic1; Damage Modes Correlated to the Dynamic Response of SIC-N; Grain Boundary Chemistry of Sic-Based Armor; Effect of Microstructure and Mechanical Properties on the Ballistic Performance of Sic-Based Ceramics; Addition of Excess Carbon to Sic to Study its Effect on Silicon Carbide (SIC) Armor
Analysis of Time-Resolved Penetration of Long Rods into Glass Targets-IIResponse and Characterization of Confined Borosilicate Glass: Intact and Damaged; Constitutive Model for Damaged Borosilicate Glass; Reaction Sintered LiAlON; Large Area EFGTM Sapphire for Transparent Armor; Relationship of Microstructure and Hardness for Al2O3 Armor Materials; Root Causes of the Performance of Boron Carbide Under Stress; Analysis of Texture in Controlled Shear Processed Boron Carbide; Progress in the Nondestructive Analysis of Impact Damage in TiB2 Armor Ceramics Elastic Property Determination of WC Spheres and Estimation of Compressive Loads and Impact Velocities That Initiate Their Yielding and CrackingOn the Role of Impact Damage in Armor Ceramic Performance; The Indentation Size Effect (ISE) for Knoop Hardness in Five Ceramic Materials; Influence of Microstructure on the Indentation-Induced Damage in Silicon Carbide; Author Index |
Record Nr. | UNINA-9910144846003321 |
Hoboken, NJ, : Wiley, c2007 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advances in ceramic armor II [[electronic resource] ] : a collection of papers presented at the 30th International Conference on Advanced Ceramics and Composites, January 22-27, 2006, Cocoa Beach, Florida / / editor, Lisa Prokurat Franks; general editors, Andrew Wereszczak, Edgar Lara-Curzio |
Pubbl/distr/stampa | Hoboken, NJ, : Wiley, c2007 |
Descrizione fisica | 1 online resource (276 p.) |
Disciplina |
620.14
623.7/4 |
Altri autori (Persone) |
Prokurat FranksLisa
WereszczakAndrew Lara-CurzioEdgar <1963-> |
Collana | Ceramic engineering and science proceedings |
Soggetto topico |
Armor
Ceramic materials Composite materials |
ISBN |
1-282-31412-2
9786612314124 0-470-29136-2 0-470-29178-8 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advances in Ceramic Armor II; Contents; Preface; Introduction; A Review of Computational Ceramic Armor Modeling; Biomorphic SiSiC-Materials for Lightweight Armour; Evaluation of Sic Armor Tile Using Ultrasonic Techniques; Spherical Indentation of Sic1; Damage Modes Correlated to the Dynamic Response of SIC-N; Grain Boundary Chemistry of Sic-Based Armor; Effect of Microstructure and Mechanical Properties on the Ballistic Performance of Sic-Based Ceramics; Addition of Excess Carbon to Sic to Study its Effect on Silicon Carbide (SIC) Armor
Analysis of Time-Resolved Penetration of Long Rods into Glass Targets-IIResponse and Characterization of Confined Borosilicate Glass: Intact and Damaged; Constitutive Model for Damaged Borosilicate Glass; Reaction Sintered LiAlON; Large Area EFGTM Sapphire for Transparent Armor; Relationship of Microstructure and Hardness for Al2O3 Armor Materials; Root Causes of the Performance of Boron Carbide Under Stress; Analysis of Texture in Controlled Shear Processed Boron Carbide; Progress in the Nondestructive Analysis of Impact Damage in TiB2 Armor Ceramics Elastic Property Determination of WC Spheres and Estimation of Compressive Loads and Impact Velocities That Initiate Their Yielding and CrackingOn the Role of Impact Damage in Armor Ceramic Performance; The Indentation Size Effect (ISE) for Knoop Hardness in Five Ceramic Materials; Influence of Microstructure on the Indentation-Induced Damage in Silicon Carbide; Author Index |
Record Nr. | UNINA-9910830002203321 |
Hoboken, NJ, : Wiley, c2007 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advances in ceramic armor III : a collection of papers presented at the 31st International Conference on Advanced Ceramics and Composites, January 21-26, 2007, Daytona Beach, Florida |
Pubbl/distr/stampa | [Place of publication not identified], : Wiley, 2007 |
Disciplina | 623.7/4 |
Collana | Ceramic engineering and science proceedings Advances in ceramic armor III |
Soggetto topico |
Ceramic materials
Composite materials Armor Chemical & Materials Engineering Engineering & Applied Sciences Materials Science |
ISBN |
0-470-33978-0
0-470-33969-1 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Record Nr. | UNINA-9910139415503321 |
[Place of publication not identified], : Wiley, 2007 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advances in ceramic armor III : a collection of papers presented at the 31st International Conference on Advanced Ceramics and Composites, January 21-26, 2007, Daytona Beach, Florida |
Pubbl/distr/stampa | [Place of publication not identified], : Wiley, 2007 |
Disciplina | 623.7/4 |
Collana | Ceramic engineering and science proceedings Advances in ceramic armor III |
Soggetto topico |
Ceramic materials
Composite materials Armor Chemical & Materials Engineering Engineering & Applied Sciences Materials Science |
ISBN |
0-470-33978-0
0-470-33969-1 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Record Nr. | UNINA-9910830962603321 |
[Place of publication not identified], : Wiley, 2007 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advances in ceramic armor V [[electronic resource] ] : a collection of papers presented at the 33rd International Conference on Advanced Ceramics and Composites, January 18-23, 2009, Daytona Beach, Florida / / edited by Jeffrey J. Swab; volume editors, Dileep Singh, Jonathan Salem |
Pubbl/distr/stampa | Hoboken, NJ, : Wiley, 2010 |
Descrizione fisica | 1 online resource (248 p.) |
Disciplina |
620.14
623.7/4 |
Altri autori (Persone) |
SwabJeffrey J
SinghDilīp SalemJ. A <1960-> (Jonathan A.) |
Collana | Ceramic engineering and science proceedings |
Soggetto topico |
Ceramic materials
Armor - Materials |
Soggetto genere / forma | Electronic books. |
ISBN |
1-282-46145-1
9786612461453 0-470-58433-5 0-470-58432-7 |
Classificazione | ZM 6100 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advances in Ceramic Armor V; Contents; Preface; Introduction; IMPACT, PENETRATION AND MATERIAL MODELING; Fragmentation of Ceramics in the Ballistic Environment; Flow Behavior of Glass at the Tip of a Penetrator; Rheology of Powder and Porous Media in Modeling of Penetration into Porous Ceramic; Computer Modeling of Shock Wave Propagation in SiC-Sample; Ballistic Impact Damage Observations in a Hot-Pressed Boron Carbide; Characterization of Microstructural Damage in Silicon Carbide Processed via Modified Chemical Vapor Deposition; MATERIAL CONCEPTS, PROCESSES AND CHARACTERIZATION
Effects of Grain Size, Shape and Second Phases on Properties of Sintered SicIndenter Elastic Modulus and Hertzian Ring Crack Initiation; High Frequency Ultrasound of Alumina for High Strain-Rate Applications; The Effect of Particle Size, Particle Loading and Thermal Processing Conditions on the Properties of Alumina Reinforced Aluminum Metal Matrix Composites; Pressureless Sintering of B4C-Sic Composites for Armor Applications; APPLICATIONS OF NDE; A Portable Microwave Interference Scanning System for Nondestructive Testing of Multi-Layered Dielectric Materials Destructive Testing and Nondestructive Evaluation of Alumina Structural CeramicsNondestructive Evaluation of as Fabricated and Damaged Encapsulated Ceramics; Microstructural Study of Sintered SiC via High Frequency Ultrasound Spectroscopy; Impact Damage Analysis in a Level III Flexible Body Armor Vest Using XCT Diagnostics; TRANSPARENT ARMOR; Impact onto Glass and Glass Ceramic Bars; Numerical Study of the Effect of Surface Stresses of Transparent Ceramics of Laminated Targets for Military Armor Applications Analyses of Various Damage Mechanisms in Transparent Armor Subject to Projectile ImpactPressureless Reaction Sintering of AlON Using Aluminum Orthophosphate as a Transient Liquid Phase; ALON® Transparent Armor; Author Index |
Record Nr. | UNINA-9910139522603321 |
Hoboken, NJ, : Wiley, 2010 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advances in ceramic armor V [[electronic resource] ] : a collection of papers presented at the 33rd International Conference on Advanced Ceramics and Composites, January 18-23, 2009, Daytona Beach, Florida / / edited by Jeffrey J. Swab; volume editors, Dileep Singh, Jonathan Salem |
Pubbl/distr/stampa | Hoboken, NJ, : Wiley, 2010 |
Descrizione fisica | 1 online resource (248 p.) |
Disciplina |
620.14
623.7/4 |
Altri autori (Persone) |
SwabJeffrey J
SinghDilīp SalemJ. A <1960-> (Jonathan A.) |
Collana | Ceramic engineering and science proceedings |
Soggetto topico |
Ceramic materials
Armor - Materials |
ISBN |
1-282-46145-1
9786612461453 0-470-58433-5 0-470-58432-7 |
Classificazione | ZM 6100 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advances in Ceramic Armor V; Contents; Preface; Introduction; IMPACT, PENETRATION AND MATERIAL MODELING; Fragmentation of Ceramics in the Ballistic Environment; Flow Behavior of Glass at the Tip of a Penetrator; Rheology of Powder and Porous Media in Modeling of Penetration into Porous Ceramic; Computer Modeling of Shock Wave Propagation in SiC-Sample; Ballistic Impact Damage Observations in a Hot-Pressed Boron Carbide; Characterization of Microstructural Damage in Silicon Carbide Processed via Modified Chemical Vapor Deposition; MATERIAL CONCEPTS, PROCESSES AND CHARACTERIZATION
Effects of Grain Size, Shape and Second Phases on Properties of Sintered SicIndenter Elastic Modulus and Hertzian Ring Crack Initiation; High Frequency Ultrasound of Alumina for High Strain-Rate Applications; The Effect of Particle Size, Particle Loading and Thermal Processing Conditions on the Properties of Alumina Reinforced Aluminum Metal Matrix Composites; Pressureless Sintering of B4C-Sic Composites for Armor Applications; APPLICATIONS OF NDE; A Portable Microwave Interference Scanning System for Nondestructive Testing of Multi-Layered Dielectric Materials Destructive Testing and Nondestructive Evaluation of Alumina Structural CeramicsNondestructive Evaluation of as Fabricated and Damaged Encapsulated Ceramics; Microstructural Study of Sintered SiC via High Frequency Ultrasound Spectroscopy; Impact Damage Analysis in a Level III Flexible Body Armor Vest Using XCT Diagnostics; TRANSPARENT ARMOR; Impact onto Glass and Glass Ceramic Bars; Numerical Study of the Effect of Surface Stresses of Transparent Ceramics of Laminated Targets for Military Armor Applications Analyses of Various Damage Mechanisms in Transparent Armor Subject to Projectile ImpactPressureless Reaction Sintering of AlON Using Aluminum Orthophosphate as a Transient Liquid Phase; ALON® Transparent Armor; Author Index |
Record Nr. | UNINA-9910830805203321 |
Hoboken, NJ, : Wiley, 2010 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
A collection of papers presented at the 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008, Daytona Beach, Florida [[electronic resource] /] / editor, Lisa Prokurat Franks ; volume editors, Tatsuki Ohji, Andrew Wereszczak |
Pubbl/distr/stampa | Hoboken, N.J., : Wiley, 2009 |
Descrizione fisica | 1 online resource (244 p.) |
Disciplina |
620.14
623.7/4 |
Altri autori (Persone) |
Prokurat FranksLisa
OhjiT (Tatsuki) WereszczakAndrew |
Collana |
Advances in ceramic armor
Ceramic engineering and science proceedings |
Soggetto topico |
Armor
Ceramic materials Composite materials |
ISBN |
1-282-02222-9
9786612022227 0-470-45628-0 0-470-45627-2 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advances in Ceramic Armor IV; Contents; Preface; Introduction; TRANSPARENT GLASSES AND CERAMICS; Mesomechanical Constitutive Relations for Glass and Ceramic Armor; Optimizing Transparent Armor Design Subject to Projectile Impact Conditions; Physics of Glass Failure during Rod Penetration; Adhesive Bond Evaluation in Laminated Safety Glass using Guided Wave Attenuation Measurements; Applying Modeling Tools to Predict Performance of Transparent Ceramic Laminate Armors; An Economic Comparison of Hot Pressing vs. Pressureless Sintering for Transparent Spinel Armor
Advances in Ballistic Performance of Commercially Available Saint-Gobain Sapphire Transparent Armor CompositesDefect Free Spinel Ceramics of High Strength and High Transparency; OPAQUE CERAMICS; Recent Results on the Fundamental Performance of a Hot-Pressed Silicon Carbide Impacted by Sub-Scale Long-Rod Penetrators; Instrumented Hertzian Indentation Study of Two Commercial Silicon Carbides; Apparent Yield Strength of Hot-Pressed SiCs; Microstructural Examination and Quasi-Static Property Determination of Sintered Armor Grade SiC Quantitative Characterization of Localized Amplitude Variations in Silicon Carbide Ceramics using Ultrasound C-Scan ImagingGrain Boundary Engineering of Silicon Carbide by Means of Coprecipitation; The Possible Roles of Stoichiometry, Microstructure, and Defects on the Mechanical Behavior of Boron Carbide; A Review of Ceramics for Armor Applications; NOVEL EVALUATION AND CHARACTERIZATION; A Portable Microwave Scanning Technique for Nondestructive Testing of Multilayered Dielectric Materials; Ballistic Damage Assessment of a Thin Compound Curved B4C Ceramic Plate using XCT Evaluation of Ballistically-Induced Damage in Ceramic Targets by X-Ray Computed TomographyAutomated Nondestructive Evaluation System for Hard Armor Protective Inserts of Body Armor; Analysis of Hardness Indentation Size Effect (ISE) Curves in Ceramics: A New Approach to Determine Plasticity; Author Index |
Record Nr. | UNINA-9910146110303321 |
Hoboken, N.J., : Wiley, 2009 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|