Mechanics of Additive and Advanced Manufacturing, Volume 9 [[electronic resource] ] : Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics / / edited by Junlan Wang, Bonnie Antoun, Eric Brown, Weinong Chen, Ioannis Chasiotis, Emily Huskins-Retzlaff, Sharlotte Kramer, Piyush R. Thakre |
Edizione | [1st ed. 2018.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2018 |
Descrizione fisica | 1 online resource (VIII, 107 p. 80 illus., 50 illus. in color.) |
Disciplina | 670 |
Collana | Conference Proceedings of the Society for Experimental Mechanics Series |
Soggetto topico |
Manufactures
Mechanics, Applied Solids Materials - Analysis Machines, Tools, Processes Solid Mechanics Characterization and Analytical Technique |
ISBN | 3-319-62834-8 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Chapter 1.Fracture Properties of Additively Manufactured Acrylonitrile-Butadiene-Styrene Materials -- Chapter 2.Complex Modulus Variation by Manipulation of Mechanical Test Method and Print Direction -- Chapter 3.Piezoelectric Inkjet Printing as a Method for the Selective Deposition of Energetic Material -- Chapter 4.A New Heat Transfer Simulation Model for Selective Laser Melting to Estimate the Geometry of Cross Section of Melt Pool -- Chapter 5.Heat Conduction and Geometry Topology Optimization of Support Structure in Laser-based Additive Manufacturing -- Chapter 6.Strain Energy Dissipation Mechanisms in Carbon Nanotube Composites Fabricated by Additive Manufacturing -- Chapter 7.Mechanical Properties of 3-D LENS and PBF Printed Stainless Steel 316L Prototypes -- Chapter 8.Effect of Heat Treatment on Friction Stir Welded Dissimilar Titanium Alloys -- Chapter 9.Effect of Porosity on Thermal Performance of Plastic Injection Molds Based on Experimental and Numerically Derived Material Properties -- Chapter 10.ODS Coating Development Using DED Additive Manufacturing for High Temperature Turbine Components -- Chapter 11.Processing and Characterization of Ti64/AZ31 Multilayered Structure by Roll Bonding -- Chapter 12.Vibration Characteristics of Unit Cell Structures fabricated by Multi-Material Additive Manufacturing -- Chapter 13.Defects, Process Parameters and Signatures for Online Monitoring and Control in Powder-based Additive Manufacturing -- Chapter 14.The Effect of the 3-D Printing Process on the Mechanical Properties of Materials -- Chapter 15.Tool Wear Mechanisms of Phyisical Vapor Deposition (PVD) TiAlN Coated Tools Under Vegetable Oil Based Lubrication. |
Record Nr. | UNINA-9910299876703321 |
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2018 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Mechanics of Composite and Multi-functional Materials, Volume 6 [[electronic resource] ] : Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics / / edited by Piyush R Thakre, Raman Singh, Geoff Slipher |
Edizione | [1st ed. 2018.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2018 |
Descrizione fisica | 1 online resource (VIII, 221 p. 233 illus., 201 illus. in color.) |
Disciplina | 620 |
Collana | Conference Proceedings of the Society for Experimental Mechanics Series |
Soggetto topico |
Mechanics
Mechanics, Applied Ceramics Glass Composites (Materials) Composite materials Materials science Solid Mechanics Ceramics, Glass, Composites, Natural Materials Characterization and Evaluation of Materials |
ISBN | 3-319-63408-9 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Chap1. Transitioning Powertrain Components from Metallic to Light-weighting Materials -- Chap2. Through Development of Inherently Sensing Energetics for Real-time in Situ Strain and Damage Detection -- Chap3. Scrap-Rubber Based Composites Reinforced with Boron and Alumina -- Chap4. Characterization of Thermoplastic Matrix Composite Joints for the Development of a Computational Framework -- Chap5. Experimental Study of Laser Cutting Process of Titanium Aluminium (Ti-Al) based Composites designed through combined Method of Powder Metallurgy and Thixoforming -- Chap6. Mechanical Characterization of Epoxy - Scrap Rubber Based Composites Reinforced with Nanoparticles -- Chap7. Mechanical Characterization of Epoxy - Scrap Rubber Based Composites Reinforced with Nanographene -- Chap8. Mechanical Characterization of Epoxy - Scrap Rubber Based Composites Reinforced with Alumina Fibers -- Chap9. Scaled Composite I-beams for Subcomponent Testing of Wind Turbine Blades: An Experimental Study -- Chap10. Development Analysis of a Stainless Steel Produced by High Energy Milling Using Chips and the Addition of Vanadium Carbide -- Chap11. Design of Magnetic Aluminium (A356) Composites through Combined Method of Sinter + Forging -- Chap12. Design of Low Composites from Recycled Aluminium-Copper +Aluminium Chips for Tribological Applications -- Chap13. Liquid Metal Dispersions for Stretchable Electronics -- Chap14. Laser Cutting of the TiN +Al₂O₃ Reinforced Aluminium Matrix Composites Through Semisolid Sintering. Chap15. Optimization of Laser Cutting Parameters for Tailored Behaviour of Scrap (Ti6242+Ti) based Composites through Semisolid Sintering -- Chap16. Studying Effect of CO₂ Laser Cutting Parameters of Titanium Alloy on Heat Affected Zone and Kerf width using the Taguchi Method -- Chap17. Fatigue Characterization of In-Situ Self-Healing Dental Composites -- Chap18. Effect of Process Induced Stresses on Measurement of FRP Strain Energy Release Rates -- Chap19. Characterization of UV Degraded Carbon Fiber-matrix Interphase using AFM Indentation -- Chap20. A Study on Mechanical Properties of Treated Sisal Polyester Composites -- Chap21. Strain-rate-dependent Failure Criteria for Composite Laminates: Application of the Northwestern Failure Theory to Multiple Material Systems -- Chap22. Progressive Failure Analysis of Multi-directional Composite Laminates Based on the Strain-Rate-Dependent Northwestern Failure Theory -- Chap23. Keynote: Experimental Mechanics for Multifunctional Composites and Next Generation UAVs (40-min). |
Record Nr. | UNINA-9910299894203321 |
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2018 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Mechanics of Composite and Multi-functional Materials, Volume 7 [[electronic resource] ] : Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics / / edited by W. Carter Ralph, Raman Singh, Gyaneshwar Tandon, Piyush R. Thakre, Pablo Zavattieri, Yong Zhu |
Edizione | [1st ed. 2017.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2017 |
Descrizione fisica | 1 online resource (IX, 307 p. 277 illus., 221 illus. in color.) |
Disciplina | 620 |
Collana | Conference Proceedings of the Society for Experimental Mechanics Series |
Soggetto topico |
Mechanics
Mechanics, Applied Ceramics Glass Composites (Materials) Composite materials Engineering—Materials Theoretical and Applied Mechanics Ceramics, Glass, Composites, Natural Materials Materials Engineering |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | 1 Mechanical and Tribological Properties of Scrap Rubber Reinforced with Al2O3 Fiber and TiO2 -- 2 Investigating Hemp Concrete Mechanical Properties Variability Due To Hemp Particles -- 3 Recycling of Scrap Aluminium (AA7075) Chips for Low Cost Composites -- 4 Scrap Rubber Based Composites Reinforced with Ceramic Oxides and Silica -- 5 Mechanical and Tribological Properties of Scrap Rubber Reinforced with Al2O3 Fiber, Aluminium and TiO2 -- 6 Thermo mechanical Investigation of Fused Deposition Modeling by Computational and Experimental Methods -- 7 Non Linear Contact Analysis of Self Supporting Lattice -- 8 Process Parameter Effects on Interlaminar Fracture Toughness of FDM Printed Coupons -- 9 Constitutive Equations for Severe Plastic Deformation Processes -- 10 Merging Experimental Evidence and Molecular Dynamics Theory to Develop Efficient Models of Solids Fracture -- 11 Comparison of Patch and Fully Encircled Bonded Composite Repair -- 12 Comparison of Composite Repair Performance on Drilled and Simulated Defects -- 13 Measuring how Overlap Affects the Strength of Composite Tubes in Bending Torsion -- 14 Thermal Cycling and Environmental Effect on Tensile Impact Behavior of Adhesive Single lap Joints for Fiber Metal Laminate -- 15 Design of Hybrid Composites from Scrap Aluminum Bronze Chips -- 16 Impact Response of Waste Poly Ethylene Terephthalate (PET) Composite Plate -- 17 Particles Reinforced Scrap Aluminum Based Composites by Combined Processing Sintering + Thixoforging -- 18 Recycle of Aluminium (A356) for Processing of New Composites Reinforced with Magnetic Nano Iron Oxide and Molybdenum -- 19 A New Multiscale Bioinspired Compliant Sensor -- 20 Effect of Microstructure on Mechanical Response of MAX Phases -- 21 Controlled Placement of Microcapsules in Polymeric Materials -- 22 Converse Magneto electric Coefficient of Composite Multiferroic Rings -- 23 In situ Sensing of Deformation and Damage in Nanocomposite Bonded Surrogate Energetic Materials -- 24 Quasi Static Characterization of Self Healing Dental Composites -- 25 Load Monitoring Using Surface Response to Excitation Method -- 26 Elevated Temperature Digital Image Correlation Using High Magnification Optical Microscopy -- 27 Design of Hybrid Composites from Scrap Aluminum Reinforced with (SiC+TiO2+Gr+Ti+B) -- 28 Manufacturing of Low Cost Composites with Porous Structures from Scrap Aluminium (AA2014) Chips -- 29 Development of Functionally Graded Nodular Cast Iron Reinforced with Recycled WC Particles -- 30 Aluminium Matrix Composites Reinforced by Nano Fe3O4 doped with TiO2 by Thermomechanical Process -- 31 Implementation of the Surface Response to Excitation Method for pipes -- 32 Thermal Methods for Evaluating Flows in Composite Materials A new Approach to Data Analysis -- 33 Characterising the Infrared Signature of Damaged Composites for Test Control -- 34 Thermoelastic Stress Analysis and Digital Image Correlation to Assess Composites -- 35 A Study on Mechanical Properties of Raw Sisal Polyester Composites -- 36 HPHT In Situ Strain Measurement of Polymer Composites for Oilfield Applications -- 37 Evaluation of Viscoelastic Characteristics of Polymer by Using Indentation Method. |
Record Nr. | UNINA-9910149489703321 |
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2017 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Mechanics of Composite and Multi-functional Materials, Volume 7 [[electronic resource] ] : Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics / / edited by Carter Ralph, Meredith Silberstein, Piyush R. Thakre, Raman Singh |
Edizione | [1st ed. 2016.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2016 |
Descrizione fisica | 1 online resource (453 p.) |
Disciplina | 620.118 |
Collana | Conference Proceedings of the Society for Experimental Mechanics Series |
Soggetto topico |
Mechanics
Mechanics, Applied Materials science Engineering—Materials Theoretical and Applied Mechanics Characterization and Evaluation of Materials Materials Engineering |
ISBN | 3-319-21762-3 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | From the Contents: Mechanics of Multifunctional Wings With Solar Cells for Robotic Birds -- Optimization of Magnetic and Electrical Properties of New Aluminium Matrix Composite Reinforced With Magnetic Nano Iron Oxide (Fe3O4) -- Manufacturing and Characterization of Non-Isotropic Membranes for Micro Air Vehicles -- Compliant Artificial Skins to Enable Robotic Sensing and Training by Touch -- Electrical Impedance Spectroscopy for Structural Health Monitoring -- Soliton-based Sensor/Actuator for Delamination and Weak Bond Detection in Laminated Composites. |
Record Nr. | UNINA-9910254231003321 |
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2016 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 5 [[electronic resource] ] : Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics / / edited by Piyush R. Thakre, Raman P. Singh, Geoffrey Slipher |
Edizione | [1st ed. 2019.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2019 |
Descrizione fisica | 1 online resource (334 pages) |
Disciplina | 620.11892 |
Collana | Conference Proceedings of the Society for Experimental Mechanics Series |
Soggetto topico |
Mechanics
Mechanics, Applied Ceramics Glass Composites (Materials) Composite materials Materials science Solid Mechanics Ceramics, Glass, Composites, Natural Materials Characterization and Evaluation of Materials |
ISBN | 3-319-95510-1 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Intro -- Preface -- Contents -- 1 Stimulus-Responsive Interfacial Chemistry in CNT/Polymer Nanocomposites -- 1.1 Introduction -- 1.2 Experimental Methods -- 1.2.1 Functionalization of CNT Films -- 1.2.2 Fabrication and UV Treatment of Layered Composites -- 1.2.3 Experimental Characterization -- 1.3 Results and Discussion -- 1.3.1 Characterization of CNT Functionalization -- 1.3.2 Photoreaction of Benzophenone -- 1.3.3 Mechanical Behavior of CNT/PDMS Nanocomposites -- 1.4 Conclusion -- References -- 2 Devulcanized Rubber Based Composite Design Reinforced with Nano Silica, Graphene Nano Platelets (GnPs) and Epoxy for "Aircraft Wing Spar" to Withstand Bending Moment -- 2.1 Introduction -- 2.2 Experimental Conditions -- 2.2.1 Materials Processing -- 2.2.2 Mechanical, Microstructure, Fracture Surface Analyses and Shore-D Hardness Measurements -- 2.2.3 Wear Resistance (Scratch Test) and Damage Analysis Via 3D Optical Roughness Meter -- 2.3 Results and Discussions -- 2.3.1 Microstructural Evaluation of the Composites -- 2.3.2 Three Point Bending Tests and Fracture Surface Observation -- 2.3.3 Drop Weight Testing -- 2.3.4 Damage Analysis by Means of Micro Scratch Test and 3D Optical Surface Roughness Meter -- 2.3.5 Numerical Approach for These Composites -- 2.4 Conclusion -- References -- 3 Study of Mechanical Characteristics of Banana and Jute Fiber Reinforced Polyester Composites -- 3.1 Introduction -- 3.2 Materials and Methodology -- 3.2.1 Materials -- 3.2.2 Methodology -- 3.3 Results and Discussions -- 3.3.1 Tensile Strength Test -- 3.3.2 Flexural Strength Test -- 3.4 Conclusions -- References -- 4 Toughening Mechanism in Epoxy Resin Modified Recycled Rubber Based Composites Reinforced with Gamma-Alumina, Graphene and CNT -- 4.1 Introduction -- 4.2 Experimental Conditions -- 4.2.1 Materials Processing.
4.2.2 Microstructure: Fracture Surface Analyses and Shore-D Hardness Measurements -- 4.2.3 Wear Resistance (Scratch Test) and Damage Analysis Via 3D Optical Roughness Meter -- 4.3 Results and Discussions -- 4.3.1 Microstructure of the Composites -- 4.3.2 Three Point Bending Tests and Fracture Surface Observation -- 4.3.2.1 Flexural Testing and Fracture Toughness Determination -- 4.3.3 Charpy Impact Testing -- 4.3.4 Damage Analysis by Means of Scratch Test and 3d Optical Roughness Meter -- 4.4 Conclusion -- References -- 5 AlSi10Mg Nanocomposites Prepared by DMLS Using In-Situ CVD Growth of CNTs: Process Effects and Mechanical Characterization -- 5.1 Introduction -- 5.2 Experimental Procedure -- 5.2.1 CVD Growth of CNTs on AlSi10Mg Powders -- 5.2.2 DMLS of Specimens and Heat Treatment -- 5.2.3 Tensile Experiments -- 5.3 Results and Discussion -- 5.3.1 Tensile Test Results -- 5.3.2 SEM Analysis of Failure Surface -- 5.4 Conclusion -- References -- 6 Optimization of Surface Integrity of Titanium-Aluminum Intermetallic Composite Machined by Wire EDM -- 6.1 Introduction -- 6.2 Experimental Procedure -- 6.2.1 Equipment, Materials and Measurement -- 6.2.2 Wire Electric Discharge Machining Process and Cutting Parameters -- 6.2.3 Influence of Cutting Parameters on the Surface Roughness -- 6.3 Statistical Analysis -- 6.4 Conclusion -- References -- 7 Design of Cost Effective Epoxy + Scrap Rubber Based Composites Reinforced with Titanium Dioxide and Alumina Fibers -- 7.1 Introduction -- 7.2 Experimental Conditions -- 7.2.1 Materials Processing -- 7.2.2 Experimental Procedure -- 7.3 Results and Discussions -- 7.3.1 Microstructure of the Composites -- 7.3.2 Three Point Bending Tests and Fracture Surface Observation -- 7.3.3 Time Dependent Behaviour by Means of NanoIndentation -- 7.3.4 Wear Testing by Nanoindentation -- 7.4 Conclusions -- References. 8 Reinforcement of Recycled Rubber Based Composite with Nano-Silica and Graphene Hybrid Fillers -- 8.1 Introduction -- 8.2 Experimental Conditions -- 8.2.1 Materials Processing -- 8.2.2 Microstructure: Fracture Surface Analyses and Shore-D Hardness Measurements -- 8.2.3 Wear Resistance (Scratch Test) and Damage Analysis via 3D Optical Roughness Meter -- 8.3 Results and Discussions -- 8.3.1 Microstructure of the Composites -- 8.3.2 Three Point Bending Tests and Fracture Surface Observation -- 8.3.2.1 Flexural Testing and Fracture Toughness Determination -- 8.3.3 Charpy Impact Testing -- 8.3.4 Damage Analysis by Means of Scratch Test and 3d Optical Roughness Meter -- 8.4 Conclusion -- References -- 9 Testing the 2-3 Shear Strength of Unidirectional Composite -- 9.1 Introduction -- 9.2 Experimental Methodology -- 9.3 Results -- 9.4 Analysis & Discussion -- 9.5 Conclusions -- References -- 10 Nondestructive Damage Detection of a Magentostricive Composite Structure -- 10.1 Introduction -- 10.2 Preliminary Results -- 10.3 Conclusion -- References -- 11 Thermo-Mechanical Properties of Thermoset Polymers and Composites Fabricated by Frontal Polymerization -- References -- 12 Design of Magnetic Aluminium (AA356) Composites (AMCs) Reinforced with Nano Fe3O4, and Recycled Nickel: Copper Particles -- 12.1 Introduction -- 12.2 Experimental Conditions -- 12.3 Results and Discussion -- 12.3.1 Microstructural Evaluation of the Composites -- 12.3.2 Evaluation of Magnetic Properties for A356-I, II, III, IV -- 12.3.3 Static Compression Test Results and Micro Hardness Measurements -- 12.3.4 Wear Resistance by Scratch Test -- 12.4 Conclusions -- References -- 13 Reinforcement Effect of Nano Fe3O4 and Nb2Al on the Mechanical and Physical Properties of Cu-Al Based Composites -- 13.1 Introduction -- 13.2 Experimental Conditions -- 13.3 Results and Discussion. 13.3.1 Microstructure and Mapping Analyses of the Compositions Produced by "Sinter+ Forging Process -- 13.3.2 Macro Wear (Scratch Test) Results -- 13.3.3 Nano Wear Testing Results Obtained by Nanoindentation -- 13.3.4 Static Compression Test Results and Micro Hardness Measurements -- 13.4 Evaluation of Magnetic Properties for CAF2 Produced with "Sinter + Forging" Process -- 13.5 Conclusions -- References -- 14 Recycled Ti-17 Based Composite Design -- Optimization Process Parameters in Wire Cut Electrical Discharge Machining (WEDM) -- 14.1 Introduction -- 14.2 Experimental Procedure -- 14.2.1 Equipment, Materials and Measurement -- 14.2.2 Wire Electric Discharge Machining Process and Cutting Parameters -- 14.2.3 Influence of Machining Parameters on Performance of WEDM Process -- 14.2.3.1 Influence of Machining Parameters on Kerf Width -- 14.2.3.2 Influence of Machining Parameters on Material Removal Rate MRR -- 14.3 Statistical Analysis -- 14.4 Conclusions -- References -- 15 Alternative Composite Design from Recycled Aluminum Chips for Mechanical Pin-Joint (Knuckle) Applications -- 15.1 Introduction -- 15.2 Experimental Conditions -- 15.2.1 Materials Processing -- 15.3 Results and Discussions -- 15.3.1 Microstructure and Mapping Analyses of the Three Compositions Produced by "Sintering" and "Sinter+ Forging Process" -- 15.3.2 Mapping Analyses of the Three Compositions Produced by Sinter+ Forging Process -- 15.3.3 Static Compression Test Results -- 15.3.4 Low Velocity or Dynamic Compression (Drop Weight) Test Results -- 15.3.5 Wear (Scratch) Test Results -- 15.4 Conclusions -- References -- 16 Manufacturing of Copper Based Composites Reinforced with Ceramics and Hard Intermetallics for Applications of Electric Motor Repair Parts -- 16.1 Introduction -- 16.2 Experimental Conditions -- 16.3 Results and Discussions. 16.3.1 Microstructure and Mapping Analyses of the Compositions Produced by "Sinter + Forging Process" -- 16.3.2 Wear (Scratch) Test Results -- 16.4 Conclusion -- References -- 17 Damping and Toughening Effect of the Reinforcements on the Epoxy Modified Recycled + Devulcanized Rubber Based Composites -- 17.1 Introduction -- 17.2 Experimental Conditions -- 17.2.1 Materials Processing -- 17.2.2 Microstructure: Fracture Surface Analyses and Shore-D Hardness Measurements -- 17.2.3 Damage Analysis by Means of Scratch Test and 3D Optical Roughness Meter -- 17.3 Results and Discussions -- 17.3.1 Specimens and Microstructure Analyses of the Composites -- 17.3.2 Three Point Bending (3PB) Test Results and Fracture Surface Observation -- 17.3.2.1 Flexural Testing and Fracture Toughness Determination -- 17.3.3 Charpy Impact Testing -- 17.3.4 Wear Resistance by Scratch Test and Damage Analyses by Means of 3D Optical Roughness Meter -- 17.4 Conclusion -- References -- 18 Impact and Post-impact Behavior of Composite Laminates Reinforced by Z-Pins -- 18.1 Introduction -- 18.2 Materials and Testing Methods -- 18.3 Impact and CAI Tests -- 18.4 Results -- 18.5 Conclusions -- References -- 19 Layered Jamming Multifunctional Actuators -- 19.1 Introduction -- 19.2 Designing and Manufacturing Layered Multifunctional Materials -- 19.3 Modeling Structural Response of Soft Actuator with Jamming Layers -- 19.4 Layered Jamming Multifunctional Actuators -- 19.4.1 Layered Jamming Structure -- 19.4.2 Prototype for a Layered Jamming Multifunctional Actuator -- 19.4.3 Layered Jamming for Multi-mode Control of Extension and Bending for Soft Actuators -- 19.4.4 Integration of Layered Jamming Actuators in a Robot: ArmadilloBot -- 19.5 Conclusions -- References -- 20 2D Microscale Observations of Interlaminar Transverse Tensile Fracture in Carbon/Epoxy Composites -- 20.1 Introduction. 20.2 Experimental Methodology. |
Record Nr. | UNINA-9910337468103321 |
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2019 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|