Info
- Utilizzare la checkbox di selezione a fianco di ciascun documento per attivare le funzionalità di stampa, invio email, download nei formati disponibili del (i) record.
10th International Symposium on High-Temperature Metallurgical Processing [[electronic resource] /] / edited by Tao Jiang, Jiann-Yang Hwang, Dean Gregurek, Zhiwei Peng, Jerome P. Downey, Baojun Zhao, Onuralp Yücel, Ender Keskinkilic, Rafael Padilla
| 10th International Symposium on High-Temperature Metallurgical Processing [[electronic resource] /] / edited by Tao Jiang, Jiann-Yang Hwang, Dean Gregurek, Zhiwei Peng, Jerome P. Downey, Baojun Zhao, Onuralp Yücel, Ender Keskinkilic, Rafael Padilla |
| Edizione | [1st ed. 2019.] |
| Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2019 |
| Descrizione fisica | 1 online resource (XXI, 817 p. 475 illus., 350 illus. in color.) |
| Disciplina | 620.11 |
| Collana | The Minerals, Metals & Materials Series |
| Soggetto topico |
Materials science
Metals Engineering—Materials Characterization and Evaluation of Materials Metallic Materials Materials Engineering |
| ISBN | 3-030-05955-3 |
| Formato | Materiale a stampa  |
| Livello bibliografico | Monografia |
| Lingua di pubblicazione | eng |
| Nota di contenuto | Part 1. Energy-efficient and Clean Metallurgical Technology -- Simplified Process for Making Anode Copper -- Techno-economic Analysis of Energy Recovery from Plastic Waste -- Development of Continuous Blast Furnace Slag Solidification Process for Coarse Aggregates -- An Innovative Oxygen-enriched Flash Smelting Technology for Lead Smelting and its Industrial Application -- Characteristics and Control Technology of Fine Particulate Matter (PM) of Iron Ore Sintering -- Sintering Bed Spraying Steam to Reduce NOx and Dioxin Emissions in Shougang -- Part 2. Simulation and Modeling of High Temperature Metallurgical Process -- Neural Prediction Model for Extraction of Germanium from Zinc Oxide Dust by Microwave Alkaline Roasting-Water Leaching -- Simulation of Velocity Field of Molten Steel in Electric Arc Furnace Steelmaking -- Thermodynamic Modelling of Magnesium, Calcium and Strontium-oxides Reduction Systems in Vacuum -- Metallization and Carburization Kinetics in DR Shaft Furnaces. The Metcarb Model -- CFD Modeling of Flow and Chemical Reactions in a Submerged Lance Copper Smelting Furnace -- Numerical Simulation of Ultrasound-Induced Cavitation Bubbling in a Calcium Ferrite Melt -- Part 3. Alloys and Materials Preparation -- Synthesis of Nanocrystalline Carbide Ceramics via Reduction of Anion-loaded Activated Carbon Precursors -- Production of Lithium-Ion Cathode Material for Automotive Batteries Using Melting Casting Process -- Part 4. Fundamental Research on High Temperature Metallurgical Processing -- Degradation Mechanisms of Refractories in a Bottom Blown Copper Smelting Furnace -- Reaction Routes of CaO-Fe2O3-TiO2 and Calcium Ferrite-TiO2 System in Continuous Heating Process -- Thermodynamic Calculations on Electric Furnace Smelting Separation of Chromium-bearing Vanadium Titanium Magnetite -- Preparation for High Activity Lime and its Effect on Desulfurization of Hot Metal Pretreatment -- Part 5. Extraction and Recovery of Metals -- An Industry Overlook of Secondary Lead Pyrometallurgical Processing -- Recovery of Aluminium and its Compounds with Hydro and Pyrometalurgical Methods from Non-metallic Residue -- Purification of Molten Zinc Chloride-Alkali Chloride by Cementation Reaction -- Thermodynamic Analysis of Smelting of Spent Catalysts for Recovery of Platinum Group Metals -- Preparation of Titanium Foams through Direct Electrolysis of the Sintered CaO-TiO2 in Molten Salt CaCl2 -- Experimental Study on Oxidative Desulfurization and Selective Reduction of Molten Copper Slag -- Recycling SiO2 and Al2O3 from the Metallurgical Slag of Nickel Laterite Ores in Molten Sodium Hydroxides -- Remove Sulfur in Copper Dross from Refining Lead by Converting Process -- Part 6. Treatment and Recycling of Metallurgical Slag/Solid Wastes -- Recovery of Fe-Cu Alloys from Copper Slags -- Physiochemical Properties of High Alumina Blast Furnace Slag -- Effect of Cooling Rate on the Acidolysis of Titania Slag -- Structural Analysis of Ge-containing Ferrous Calcium Silicate Magnesia Slag for Applications of Black Copper Smelting -- Selective Recovery of P and Mn from Steelmaking Slag by Carbothermic Reduction -- The Use of Zirconia-based Solid Electrolytes Oxygen Sensor in High Titanium Slag -- In-situ Observation of the Precipitation Behavior of Dy2O3 Containing Slag System -- Recovery of Zn and Mn from Spent Alkaline Batteries -- Part 7. Ironmaking, Steelmaking and Casting -- Optimization of Exothermic Riser Sleeve Design Parameters -- Assessment of Gas-Slag-Metal Interaction during a Converter Steelmaking Process -- On the Role of Nb on the Texture and Mechanical Properties of a Novel As-rolled Medium Carbon Wear Resistant Slurry Pipeline Steel -- A Statistical Analysis of Process Abnormalities in Slab Casting -- Effect of Density Difference on Particle Segregation Behaviors at Bell-less Top Blast Furnace with Parallel-type Hopper -- The Effect of Austenitizing Temperature on Hardenability, Precipitation and Mechanical Properties of Boron Bearing Cr-Mo Alloy Steel -- Part 8. Agglomeration and Direct Reduction of Complex Iron Ores -- Study on Direct Reduction Melting Separation-leaching Process of Disposal Rare Earth Composite Iron Ore -- Reduction Behavior of Garnierite Using Methane by Roasting-Magnetic Separation Method -- Effect of Calculation Method of CaO Addition on Liquid Phase Fluidity -- Effect of Carbon Coating on Magnetite Reduction -- Optimization Method for Iron Ore Blending Based on the Sintering Basic Characteristics of Blended Ore -- Study on Direct Reduction of Low-grade Iron Ore-coal Mini-pellets in Coal-based Rotary Kiln -- Part 9. Poster Session I -- Controlled Synthesis of TiC Nanoparticles Using Solid Oxide Membrane Technology in Molten CaCl2 -- Effect of Chemical Components of Mould Flux on Dissolution Rate of Al2O3 into Molten Flux for High Manganese High Aluminum Steel -- Effect of Temperature on Oxidation Behavior of Cr-Mo-V Steel with Different Cr Contents for High-speed Train Brake Discs -- Electrochemical Preparation of Ti5Si3/TiC Composite from Titanium-rich Slag in Molten CaCl2 -- Evolution of Al-Ti-Mg-O Inclusions during Refining and Casting Process of Interstitial Free Steel -- Experimental Study on Carburization of Higher Vanadium-bearing Hot Metal -- Hematite Precipitation from High Iron Solution in Hydrometallurgy Process -- Influence On The Crystallization Phase Of Mold Flux By Magnetic Fields -- Kinetics Study on Limestone Decomposition in Early Converter Slag -- Mathematical Modeling and Analysis of Converter Slagging and Steelmaking Process by Replacing Part of Lime With Limestone -- Research of Digital Platform and Process Guidance Model in EAF Steelmaking Process -- Research on Factors Affecting and Prediction Model of Silicon Content in Hot Metal of Corex -- Studied on the Cooling Effect of CO2 on the Temperature of Vanadium in Converter -- Study on Grain Size and Porosity of the Produced Lime from Limestone in Early Converter Slag -- Study on Reducing Al2O3 Inclusions by Optimizing Refining Slag -- Study on the Volatilization of Sb2S3 in Vacuum -- The Effects of ZrO2, Y2O3 and Sc2O3 on the Properties of Mould Fluxes for High Manganese High Aluminum Steels -- Thermogravimetric Analysis and Kinetic Study of the Calcification Roasting of Vanadium Slag -- Viscosity of Mould Flux under Electromagnetic Field -- Part 10. Poster Session II -- Analysis of Microwave Drying Behavior of Nickel Laterite -- Analysis of Operational Parameters Affecting Metallization Degree of DRI in Reduction Shaft of COREX Process and Improvement Measures -- Dechlorination of Zinc Oxide Dust by Microwave Rosating with RSM Optimization -- Effect of TiO2 on the Viscous Behavior of High Alumina Blast Furnace Slag -- Fundamental Research on the Iron Nugget Process from Carbon Composite Pellet -- Influence of Coke Quality on Main Technical Indexes of Blast Furnace -- Kinetic Analysis of Blast Furnace Dust Recycling with Flash Reduction Process at High Temperature -- Preparation and Characterization of Iron-coke Briquette -- Preparation of Oxidized pellets with Chrome Ore -- Research and Application of Sintering Surface Steam Spraying Technology for Energy Saving and Quality Improvement -- Research on Bonding Mechanism of Sintering Grate -- Research on Optimizing Sinter Ore Matching Based on the High Temperature Characteristic Numbers -- Research on the Mineral Composition and Microstructure Changes of Iron Ore Sinter during the Gas-Solid Reduction -- Roasting Kinetics of Molybdenite Concentrates -- Study on Influences of Different Ti-bearing Materials on MgO-bearing Pellets Metallurgical Properties -- Supergravity Separation of Pb and Sn from Waste Printed Circuit Boards -- The Effect of Temperature and Additive on Transport and Transformation of P of High-phosphorus Iron Ore during Carbothermic Reduction -- Thermodynamic Calculations on Direct Reduction of Chromium-bearing Vanadium Titanium Magnetite. |
| Record Nr. | UNINA-9910337932003321 |
| Cham : , : Springer International Publishing : , : Imprint : Springer, , 2019 | ||
| Materiale a stampa | ||
| Lo trovi qui: Univ. Federico II | ||
| ||
11th International Symposium on High-Temperature Metallurgical Processing / / edited by Zhiwei Peng, Jiann-Yang Hwang, Jerome P. Downey, Dean Gregurek, Baojun Zhao, Onuralp Yücel, Ender Keskinkilic, Tao Jiang, Jesse F. White, Morsi Mohamed Mahmoud
| 11th International Symposium on High-Temperature Metallurgical Processing / / edited by Zhiwei Peng, Jiann-Yang Hwang, Jerome P. Downey, Dean Gregurek, Baojun Zhao, Onuralp Yücel, Ender Keskinkilic, Tao Jiang, Jesse F. White, Morsi Mohamed Mahmoud |
| Edizione | [1st ed. 2020.] |
| Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2020 |
| Descrizione fisica | 1 online resource (XXV, 1049 p. 595 illus., 425 illus. in color.) |
| Disciplina | 620.11217 |
| Collana | The Minerals, Metals & Materials Series |
| Soggetto topico |
Metals
Materials science Manufactures Engineering—Materials Organometallic chemistry Metallic Materials Characterization and Evaluation of Materials Manufacturing, Machines, Tools, Processes Materials Engineering Organometallic Chemistry |
| ISBN | 3-030-36540-9 |
| Formato | Materiale a stampa |
| Livello bibliografico | Monografia |
| Lingua di pubblicazione | eng |
| Record Nr. | UNINA-9910373893803321 |
| Cham : , : Springer International Publishing : , : Imprint : Springer, , 2020 | ||
| Materiale a stampa | ||
| Lo trovi qui: Univ. Federico II | ||
| ||
12th International Symposium on High-Temperature Metallurgical Processing / / edited by Zhiwei Peng [and nine others]
| 12th International Symposium on High-Temperature Metallurgical Processing / / edited by Zhiwei Peng [and nine others] |
| Pubbl/distr/stampa | Cham, Switzerland : , : Springer, , [2022] |
| Descrizione fisica | 1 online resource (642 pages) |
| Disciplina | 620.11217 |
| Collana | Minerals, metals & materials series |
| Soggetto topico |
Materials at high temperatures
Metals - Effect of high temperatures on |
| ISBN | 3-030-92388-6 |
| Formato | Materiale a stampa |
| Livello bibliografico | Monografia |
| Lingua di pubblicazione | eng |
| Altri titoli varianti | Twelfth International Symposium on High-Temperature Metallurgical Processing |
| Record Nr. | UNINA-9910522566803321 |
| Cham, Switzerland : , : Springer, , [2022] | ||
| Materiale a stampa | ||
| Lo trovi qui: Univ. Federico II | ||
| ||
9th International Symposium on High-Temperature Metallurgical Processing / / edited by Jiann-Yang Hwang, Tao Jiang, Mark William Kennedy, Dean Gregurek, Shijie Wang, Baojun Zhao, Onuralp Yücel, Ender Keskinkilic, Jerome P Downey, Zhiwei Peng, Rafael. Padilla
| 9th International Symposium on High-Temperature Metallurgical Processing / / edited by Jiann-Yang Hwang, Tao Jiang, Mark William Kennedy, Dean Gregurek, Shijie Wang, Baojun Zhao, Onuralp Yücel, Ender Keskinkilic, Jerome P Downey, Zhiwei Peng, Rafael. Padilla |
| Edizione | [1st ed. 2018.] |
| Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2018 |
| Descrizione fisica | 1 online resource (XXIV, 887 p. 534 illus.) |
| Disciplina | 620.11217 |
| Collana | The Minerals, Metals & Materials Series |
| Soggetto topico |
Materials science
Metals Engineering—Materials Characterization and Evaluation of Materials Metallic Materials Materials Engineering |
| ISBN | 3-319-72138-0 |
| Formato | Materiale a stampa |
| Livello bibliografico | Monografia |
| Lingua di pubblicazione | eng |
| Nota di contenuto | Part 1. Energy-efficient and Clean Metallurgical Technology -- Simplified Process for Making Anode Copper -- Techno-economic Analysis of Energy Recovery from Plastic Waste -- Development of Continuous Blast Furnace Slag Solidification Process for Coarse Aggregates -- An Innovative Oxygen-enriched Flash Smelting Technology for Lead Smelting and its Industrial Application -- Characteristics and Control Technology of Fine Particulate Matter (PM) of Iron Ore Sintering -- Sintering Bed Spraying Steam to Reduce NOx and Dioxin Emissions in Shougang -- Part 2. Simulation and Modeling of High Temperature Metallurgical Process -- Neural Prediction Model for Extraction of Germanium from Zinc Oxide Dust by Microwave Alkaline Roasting-Water Leaching -- Simulation of Velocity Field of Molten Steel in Electric Arc Furnace Steelmaking -- Thermodynamic Modelling of Magnesium, Calcium and Strontium-oxides Reduction Systems in Vacuum -- Metallization and Carburization Kinetics in DR Shaft Furnaces. The Metcarb Model -- CFD Modeling of Flow and Chemical Reactions in a Submerged Lance Copper Smelting Furnace -- Numerical Simulation of Ultrasound-Induced Cavitation Bubbling in a Calcium Ferrite Melt -- Part 3. Alloys and Materials Preparation -- Synthesis of Nanocrystalline Carbide Ceramics via Reduction of Anion-loaded Activated Carbon Precursors -- Production of Lithium-Ion Cathode Material for Automotive Batteries Using Melting Casting Process -- Part 4. Fundamental Research on High Temperature Metallurgical Processing -- Degradation Mechanisms of Refractories in a Bottom Blown Copper Smelting Furnace -- Reaction Routes of CaO-Fe2O3-TiO2 and Calcium Ferrite-TiO2 System in Continuous Heating Process -- Thermodynamic Calculations on Electric Furnace Smelting Separation of Chromium-bearing Vanadium Titanium Magnetite -- Preparation for High Activity Lime and its Effect on Desulfurization of Hot Metal Pretreatment -- Part 5. Extraction and Recovery of Metals -- An Industry Overlook of Secondary Lead Pyrometallurgical Processing -- Recovery of Aluminium and its Compounds with Hydro and Pyrometalurgical Methods from Non-metallic Residue -- Purification of Molten Zinc Chloride-Alkali Chloride by Cementation Reaction -- Thermodynamic Analysis of Smelting of Spent Catalysts for Recovery of Platinum Group Metals -- Preparation of Titanium Foams through Direct Electrolysis of the Sintered CaO-TiO2 in Molten Salt CaCl2 -- Experimental Study on Oxidative Desulfurization and Selective Reduction of Molten Copper Slag -- Recycling SiO2 and Al2O3 from the Metallurgical Slag of Nickel Laterite Ores in Molten Sodium Hydroxides -- Remove Sulfur in Copper Dross from Refining Lead by Converting Process -- Part 6. Treatment and Recycling of Metallurgical Slag/Solid Wastes -- Recovery of Fe-Cu Alloys from Copper Slags -- Physiochemical Properties of High Alumina Blast Furnace Slag -- Effect of Cooling Rate on the Acidolysis of Titania Slag -- Structural Analysis of Ge-containing Ferrous Calcium Silicate Magnesia Slag for Applications of Black Copper Smelting -- Selective Recovery of P and Mn from Steelmaking Slag by Carbothermic Reduction -- The Use of Zirconia-based Solid Electrolytes Oxygen Sensor in High Titanium Slag -- In-situ Observation of the Precipitation Behavior of Dy2O3 Containing Slag System -- Recovery of Zn and Mn from Spent Alkaline Batteries -- Part 7. Ironmaking, Steelmaking and Casting -- Optimization of Exothermic Riser Sleeve Design Parameters -- Assessment of Gas-Slag-Metal Interaction during a Converter Steelmaking Process -- On the Role of Nb on the Texture and Mechanical Properties of a Novel As-rolled Medium Carbon Wear Resistant Slurry Pipeline Steel -- A Statistical Analysis of Process Abnormalities in Slab Casting -- Effect of Density Difference on Particle Segregation Behaviors at Bell-less Top Blast Furnace with Parallel-type Hopper -- The Effect of Austenitizing Temperature on Hardenability, Precipitation and Mechanical Properties of Boron Bearing Cr-Mo Alloy Steel -- Part 8. Agglomeration and Direct Reduction of Complex Iron Ores -- Study on Direct Reduction Melting Separation-leaching Process of Disposal Rare Earth Composite Iron Ore -- Reduction Behavior of Garnierite Using Methane by Roasting-Magnetic Separation Method -- Effect of Calculation Method of CaO Addition on Liquid Phase Fluidity -- Effect of Carbon Coating on Magnetite Reduction -- Optimization Method for Iron Ore Blending Based on the Sintering Basic Characteristics of Blended Ore -- Study on Direct Reduction of Low-grade Iron Ore-coal Mini-pellets in Coal-based Rotary Kiln -- Part 9. Poster Session I -- Controlled Synthesis of TiC Nanoparticles Using Solid Oxide Membrane Technology in Molten CaCl2 -- Effect of Chemical Components of Mould Flux on Dissolution Rate of Al2O3 into Molten Flux for High Manganese High Aluminum Steel -- Effect of Temperature on Oxidation Behavior of Cr-Mo-V Steel with Different Cr Contents for High-speed Train Brake Discs -- Electrochemical Preparation of Ti5Si3/TiC Composite from Titanium-rich Slag in Molten CaCl2 -- Evolution of Al-Ti-Mg-O Inclusions during Refining and Casting Process of Interstitial Free Steel -- Experimental Study on Carburization of Higher Vanadium-bearing Hot Metal -- Hematite Precipitation from High Iron Solution in Hydrometallurgy Process -- Influence On The Crystallization Phase Of Mold Flux By Magnetic Fields -- Kinetics Study on Limestone Decomposition in Early Converter Slag -- Mathematical Modeling and Analysis of Converter Slagging and Steelmaking Process by Replacing Part of Lime With Limestone -- Research of Digital Platform and Process Guidance Model in EAF Steelmaking Process -- Research on Factors Affecting and Prediction Model of Silicon Content in Hot Metal of Corex -- Studied on the Cooling Effect of CO2 on the Temperature of Vanadium in Converter -- Study on Grain Size and Porosity of the Produced Lime from Limestone in Early Converter Slag -- Study on Reducing Al2O3 Inclusions by Optimizing Refining Slag -- Study on the Volatilization of Sb2S3 in Vacuum -- The Effects of ZrO2, Y2O3 and Sc2O3 on the Properties of Mould Fluxes for High Manganese High Aluminum Steels -- Thermogravimetric Analysis and Kinetic Study of the Calcification Roasting of Vanadium Slag -- Viscosity of Mould Flux under Electromagnetic Field -- Part 10. Poster Session II -- Analysis of Microwave Drying Behavior of Nickel Laterite -- Analysis of Operational Parameters Affecting Metallization Degree of DRI in Reduction Shaft of COREX Process and Improvement Measures -- Dechlorination of Zinc Oxide Dust by Microwave Rosating with RSM Optimization -- Effect of TiO2 on the Viscous Behavior of High Alumina Blast Furnace Slag -- Fundamental Research on the Iron Nugget Process from Carbon Composite Pellet -- Influence of Coke Quality on Main Technical Indexes of Blast Furnace -- Kinetic Analysis of Blast Furnace Dust Recycling with Flash Reduction Process at High Temperature -- Preparation and Characterization of Iron-coke Briquette -- Preparation of Oxidized pellets with Chrome Ore -- Research and Application of Sintering Surface Steam Spraying Technology for Energy Saving and Quality Improvement -- Research on Bonding Mechanism of Sintering Grate -- Research on Optimizing Sinter Ore Matching Based on the High Temperature Characteristic Numbers -- Research on the Mineral Composition and Microstructure Changes of Iron Ore Sinter during the Gas-Solid Reduction -- Roasting Kinetics of Molybdenite Concentrates -- Study on Influences of Different Ti-bearing Materials on MgO-bearing Pellets Metallurgical Properties -- Supergravity Separation of Pb and Sn from Waste Printed Circuit Boards -- The Effect of Temperature and Additive on Transport and Transformation of P of High-phosphorus Iron Ore during Carbothermic Reduction -- Thermodynamic Calculations on Direct Reduction of Chromium-bearing Vanadium Titanium Magnetite. |
| Record Nr. | UNINA-9910298603403321 |
| Cham : , : Springer International Publishing : , : Imprint : Springer, , 2018 | ||
| Materiale a stampa | ||
| Lo trovi qui: Univ. Federico II | ||
| ||
Characterization of Minerals, Metals, and Materials 2015 / / edited by John S. Carpenter, Chenguang Bai, Juan Pablo Escobedo, Jiann-Yang Hwang, Shadia Ikhmayies, Bowen Li, Jian Li, Sergio Neves Monteiro, Zhiwei Peng, Mingming Zhang
| Characterization of Minerals, Metals, and Materials 2015 / / edited by John S. Carpenter, Chenguang Bai, Juan Pablo Escobedo, Jiann-Yang Hwang, Shadia Ikhmayies, Bowen Li, Jian Li, Sergio Neves Monteiro, Zhiwei Peng, Mingming Zhang |
| Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2016 |
| Descrizione fisica | 1 online resource (XXV, 792 p.) |
| Disciplina | 620.11 |
| Soggetto topico |
Materials science
Metals Ceramics Glass Composite materials Materials Science Characterization and Evaluation of Materials Metallic Materials Ceramics, Glass, Composites, Natural Materials |
| ISBN | 3-319-48191-6 |
| Formato | Materiale a stampa |
| Livello bibliografico | Monografia |
| Lingua di pubblicazione | eng |
| Record Nr. | UNINA-9910484651503321 |
| Cham : , : Springer International Publishing : , : Imprint : Springer, , 2016 | ||
| Materiale a stampa | ||
| Lo trovi qui: Univ. Federico II | ||
| ||
Characterization of Minerals, Metals, and Materials 2016 / / edited by Shadia Jamil Ikhmayies, Bowen Li, John S. Carpenter, Jiann-Yang Hwang, Sergio Neves Monteiro, Jian Li, Donato Firrao, Mingming Zhang, Zhiwei Peng, Juan P. Escobedo-Diaz, Chenguang Bai
| Characterization of Minerals, Metals, and Materials 2016 / / edited by Shadia Jamil Ikhmayies, Bowen Li, John S. Carpenter, Jiann-Yang Hwang, Sergio Neves Monteiro, Jian Li, Donato Firrao, Mingming Zhang, Zhiwei Peng, Juan P. Escobedo-Diaz, Chenguang Bai |
| Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2016 |
| Descrizione fisica | 1 online resource (XXVII, 808 p.) |
| Disciplina | 620.11 |
| Soggetto topico |
Materials science
Materials Ceramics Glass Composite materials Materials Science Characterization and Evaluation of Materials Ceramics, Glass, Composites, Natural Materials Materials Engineering |
| ISBN | 3-319-48210-6 |
| Formato | Materiale a stampa |
| Livello bibliografico | Monografia |
| Lingua di pubblicazione | eng |
| Record Nr. | UNINA-9910484255303321 |
| Cham : , : Springer International Publishing : , : Imprint : Springer, , 2016 | ||
| Materiale a stampa | ||
| Lo trovi qui: Univ. Federico II | ||
| ||
Characterization of Minerals, Metals, and Materials 2017 / / edited by Shadia Ikhmayies, Bowen Li, John S. Carpenter, JIan Li, Jiann-Yang Hwang, Sergio Neves Monteiro, Donato Firrao, Mingming Zhang, Zhiwei Peng, Juan P. Escobedo-Diaz, Chenguang Bai, Yunus Eren Kalay, Ramasis Goswami, Jeongguk Kim
| Characterization of Minerals, Metals, and Materials 2017 / / edited by Shadia Ikhmayies, Bowen Li, John S. Carpenter, JIan Li, Jiann-Yang Hwang, Sergio Neves Monteiro, Donato Firrao, Mingming Zhang, Zhiwei Peng, Juan P. Escobedo-Diaz, Chenguang Bai, Yunus Eren Kalay, Ramasis Goswami, Jeongguk Kim |
| Edizione | [1st ed. 2017.] |
| Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2017 |
| Descrizione fisica | 1 online resource (XXIX, 872 p. 480 illus.) |
| Disciplina | 620.11 |
| Collana | The Minerals, Metals & Materials Series |
| Soggetto topico |
Materials science
Building materials Engineering—Materials Characterization and Evaluation of Materials Structural Materials Materials Engineering |
| ISBN | 3-319-51382-6 |
| Formato | Materiale a stampa |
| Livello bibliografico | Monografia |
| Lingua di pubblicazione | eng |
| Nota di contenuto | Part 1: Soft Materials -- Charpy Toughness Behavior of Fique Fabric Reinforced Polyester Matrix Composites -- Comparative Analysis of Curaua Fiber Density Using the Geometric Characterization and Pycnometry Technique -- Izod impact tests in polyester matrix composites reinforced with blanket of the malva and jute fibers -- Tensile Behavior of Epoxy Matrix Composites Reinforced With Eucalyptus Fibers -- The dimensional characterization of jute fabric strips for reinforcement in composite polymeric -- Izod Toughness Behavior of Continuous PALF Fibers Reinforced Polyester Matrix Composites -- Mechanical, thermal, morphology and barrier properties of flexible film based on polyethylene-ethylene vinyl alcohol blend reinforced with graphene oxide -- Radiation Effects on Crosslinking of Butyl Rubber Compounds -- Part 2: Clays and Ceramics -- Effect of Skin-Core Hierarchical Structure on Dielectric Constant of Injection Molded and Cast Film Extruded Liquid Crystalline Polymer -- Aging behaviour in Ni0.5CoxMn2.5-xO4 (x=0.5, 0.8 and 1.1) thermistors -- Adsorption of lead from aqueous solutions to bentonite and composite -- Part 3: Electronic, Magnetic, Environmental, and Advanced Materials -- Characterization Of Low-Zinc Electric Arc Furnace Dust -- GAMMA-RADIATION EFFECT ON BIODEGRADABILITY OF SYNTHETIC PLA STRUCTURAL FOAMS PP/HMSPP BASED -- STUDY OF FLEXIBLE FILMS PREPARED FROM PLA/PBAT BLEND AND PLA e-BEAM IRRADIATED AS COMPATIBILIZING AGENT -- Synthesis of ZnO Micro Prisms on Glass Substrates by the Spray Pyrolysis Method -- Part 4: Nano Materials -- Electrical and microstructural investigation of Ni0.5Co0.5Cu0.3Zn0.3Mn1.4O4 temperature sensors -- Enhanced physical properties of thin film nanocomposites -- A study on the size and type of inclusions in Si-Mn combined deoxidated low carbon steel strip -- Effect of Argon Gas Purging of Spark Plasma Sintered ZrB2+SiC Nano-powder Composites -- Part 5: Alloys -- Investigating the Anisotropic Behaviour of Lean Duplex Stainless Steel 2101 -- MICROSTRUCTUAL INVESTIGATION AND IMPACT TESTING OF ADDITIVE MANUFACTURED TI-6AL-4V -- Part 6: Powders and Foams -- SYNTHESIS OF TiN NANO-COMPOSITE POWDER BY HIGH-ENERGY BALL MILLING OF TiH2 UNDER NITROGEN ATMOSPHERE -- Application of AFM in Morphology Determination of Powder Material -- Effects of Thermal Processing on Closed-Cell Aluminium Foams -- Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams under Drop Weight Impact -- Deformation Mechanisms of Closed Cell-Aluminium Foams during Drop Weight Impact -- Part 7: Minerals -- INDUSTRIAL USE OF BRAZILIAN BENTONITE MODIFIED BY MILD ACID ATTACK -- Mullitization Characteristics and Sinterability of Kyanite in Ceramic Preparation -- Ore Dressing and Technological characterization of Palygorskite from Piauí/Brazil for applications as adsorbent of heavy metals -- TECHNOLOGICAL CHARACTERIZATION OF WASTE FROM GOLD MINING DAM -- Synthesis and Characterization of Sodalite and Cancrinita from Kaolin -- Part 8: Ferrous Metals -- Effects of Alumina and Magnesia on Microstructure and Mineralogy of Iron Ore Sinter -- Isothermal Reduction Kinetics of CaO·2Fe2O3 by Thermogravimetric Analysis -- Phase Transformation of MnO2 and Fe2O3 Briquettes Roasted Under CO-CO2 Atmospheres -- Contact Angle of Iron Ore Particles with Water: Measurements and Influencing Factors -- Important Factors to Consider in FIB Milling of Crystalline Materials -- Part 9: Material Processing and Corrosion -- Corrosion Behavior of Super-Ferritic Stainless Steels in NaCl media -- Effect of bromide ions on the pitting corrosion of hafnium in anhydrous t-butanol and acetonitrile -- Compression Behavior of Semi-Closed Die Forged AZ80 Extrusion -- Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique -- Part 10: Method Development -- Development of A New Recycling Process of PGM from Metal-supported Catalyst Using Complex Oxide -- Part 11: Composites -- High thermal conducting composites using percolation theory -- SORPTION CHARACTERISTICS OF LOW DENSITY POLYETHYLENE/KOLA NUT COMPOSITE -- Residual Stress Analysis within Steel Encapsulated Metal Matrix Composites Via Neutron Diffraction -- Tensile Behavior of Epoxy Matrix Composites Reinforced With Pure Ramie Fabric -- Hemp Fiber Density Using the Pycnometer Technique -- Preparation and Characterization of Clay Exfoliation and Vegetal fibre on Properties of Recycled Low Density Polyethylene (rLDPE) -- Part 12: Ferrous Metals -- Estimation of Dislocation Density in Metals from Microhardness Test -- Part 13: Welding and Solidification -- Interfacial strength characterization in a high-modulus low-density steel-based Fe-TiB2 composite -- Part 14: Materials Extractions -- Leaching of Copper-Cobalt Tailings from the Democratic Republic of Congo -- OPTIMUM OPERATING CONDITIONS FOR EXTRACTION OF LIGNIN PRECURSORS FROM PALM FRUIT BUNCH -- SELECTION ON THE PROCESS FOR ENRICHING GOLD FROM REFRACTORY GOLD ORES BY SMELTING -- SELECTION ON THE PROCESS FOR REMOVING AND RECOVERING ANTIMONY FROM ANTIMONIAL REFRACTORY GOLD ORES -- Upgrading of Copper and Cobalt from the Democratic Republic of Congo Tailings -- CHARACTERIZATION OF SPENT PRINTED CIRCUIT BOARDS FROM COMPUTERS -- Study of the Effect of the Initial Nucleation Mechanism of Lead Anode Oxidation Film on Internal Stress in Chromic Acid Electrolyte -- Part 15: Poster Session -- Addition of Cellulose Nanofibers in Reactive Powder Concrete -- ADVANCED ION COLUMN SOLUTION FOR LOW ION DAMAGE CHARACTERIZATION AND ULTRA-FINE PROCESS -- Application of Membrane Separation Technology in Wastewater Treatment of Iron and Steel Enterprise -- Brillouin Scattering Study on Elastic Properties of Bulk hcp ZnO Single Crystal -- Characteristics of stamp charging coke and top charging coke -- Characterization and leaching proposal of Ag ( I) from a Zn concentrate -- Characterization and Mechanical Properties of Additively Manufactured Stainless Steel 316L -- CHARACTERIZATION OF MERCURY JAROSITE -- Characterization of steel production dust and their use in structural ceramics -- CHARPY TOUGHNESS BEHAVIOR OF JUTE FABRIC REINFORCED POLYESTER MATRIX COMPOSITES -- Chemical and Mineralogical Characterization of a Mixed Sulphide Ore at Zimapan, Hidalgo -- Contribution to the ß relaxation study of the HDPE, LDPE and LLDPE -- Determination of Ten Impurity Elements in Tin Concentrate and Smelting Products by ICP-AES -- Effects of wet grinding on the structure and granularity of biological origin aragonite and its polymorphic transformation into calcite -- EVALUATION OF BALLISTIC ARMOR BEHAVIOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS -- EVALUATION OF THE POZZOLANIC ACTIVITY OF RESIDUE FROM THE PAPER INDUSTRY -- EVALUATION OF THE PROPERTIES OF THE ADHESIVE MORTAR IN THE FRESH STATE WITH ADDITION OF GLASS WASTE -- Experimental Evaluation of the Influence of Mortar’s Mechanical Properties on The Behavior of Clay Masonry -- Influence of Operation Conditions on Normal Stress and Flow Pattern of Burden Materials in Blast Furnace Based on Discrete Element Method -- Polymer Blend based on recycled polyethylene and ethylene vinyl acetate copolymers reinforced with natural fibers from agricultural wastes -- Preliminary study of the effect of stirring rate, temperature and oxygen pressure on the leach rate of copper powder, generated by grinding of printed circuit boards of computer -- Preparation and Characterization of Polyethylene Nanocomposites with Clay and Silver Nanoparticles -- Production of concrete interlocking blocks with partial replacement of sand in bulk by waste glass machined -- Reactive Powder Concrete Production with the Addition of Granite Processing Waste -- Research on the reason of the different type of chloride forming in the process of blast furnace ironmaking -- Stress and Deformation Analysis of Hot Blast Stove Piping System -- Stress and Deformation Analysis of Top Combustion Hot Blast Stove Shell -- STUDY OF CALCINED MIXTURES FROM INDUSTRIAL RESIDUES FOR PRODUCTION OF AGGLOMERATES -- STUDY OF SYNERGISTIC EFFECT OF LIGHT STABILIZER ADDITIVE, CONVENTIONAL AND NANOPARTICLES, APPLIED TO POLYETHYLENE FILMS SUBMITTED TO ULTRAVIOLET RADIATION -- Study of the effect of surface liquid flow during column flotation of mining tailing of the Dos Carlos dam -- STUDY ON BENDING TEST ON CONCRETE STRUCTURAL USE CRUMB RUBBER AS SUBSTITUTE IN FINE AGGREGATE -- Synthesis and structural characterization of BaTiO3 doped with Gd3+ -- Texture analysis and anisotropic properties of a rolled CuZn36 brass alloy -- The influence of titanium content on the sinter ore phase structure and the crack -- The use of Network Simplex method for planning the incorporation of recycled paper mill sludge in manufacturing of ceramic bodies -- USE OF ALKALINE SOLID WASTES FROM KRAFT PULP AND PAPER MILLS, DREGS AND GRITS IN CEMENT PRODUCTION -- Wood-to-concrete joints using steel connectors: experimental evaluation. |
| Record Nr. | UNINA-9910163994103321 |
| Cham : , : Springer International Publishing : , : Imprint : Springer, , 2017 | ||
| Materiale a stampa | ||
| Lo trovi qui: Univ. Federico II | ||
| ||
Characterization of Minerals, Metals, and Materials 2018 / / edited by Bowen Li, Jian Li, Shadia Ikhmayies, Mingming Zhang, Yunus Eren Kalay, John S. Carpenter, Jiann-Yang Hwang, Sergio Neves Monteiro, Donato Firrao, Andrew Brown, Chenguang Bai, Zhiwei Peng, Juan P. Escobedo-Diaz, Ramasis Goswami, Jeongguk Kim
| Characterization of Minerals, Metals, and Materials 2018 / / edited by Bowen Li, Jian Li, Shadia Ikhmayies, Mingming Zhang, Yunus Eren Kalay, John S. Carpenter, Jiann-Yang Hwang, Sergio Neves Monteiro, Donato Firrao, Andrew Brown, Chenguang Bai, Zhiwei Peng, Juan P. Escobedo-Diaz, Ramasis Goswami, Jeongguk Kim |
| Edizione | [1st ed. 2018.] |
| Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2018 |
| Descrizione fisica | 1 online resource (XXX, 731 p. 400 illus.) |
| Disciplina | 620.112 |
| Collana | The Minerals, Metals & Materials Series |
| Soggetto topico |
Materials science
Building materials Engineering—Materials Characterization and Evaluation of Materials Structural Materials Materials Engineering |
| ISBN | 3-319-72484-3 |
| Formato | Materiale a stampa |
| Livello bibliografico | Monografia |
| Lingua di pubblicazione | eng |
| Nota di contenuto | Part 1. Characterization Methods -- On FIB Milling Parameters -- Part 2. Characterization of Ceramics -- Preparation and Characteristics of Steel Slag Ceramics from Converter Slag -- In-situ XRD Investigation of Bauxite Dehydroxylation -- The Investigation of Humics as a Binder for LiFePO4 Cathode Using in Lithium Ion Battery -- Evaluation of Brazilian Bentonite Modified by Acid Attack in Biofuel Production -- Part 3. Characterization of Non-ferrous Metals -- Synthesis and Characterization on Nickel Orthosilicate Anode of Lithium-ion Battery -- Eletrochemical Behavior and Corrosion Properties of Ti-6Al-4V Alloy Made by Selective Laser Melting for Immersion in Artificial Seawater at Different Temperature -- Part 4. Microstructure and Performance of Materials -- Correlation of Microstructure to Dynamic Properties in Two Grades of Alumina -- Part 5. Characterization and Uses of Metallurgical Slags -- Preparation and Characterization of NaNO3/BFS Composite Phase Change Materials -- Characteristics of WISCO Steelmaking Slags -- Effects of Civil Construction Waste on Properties of Lining Mortars -- Pilot Trial of Direct Modification of Molten Blast Furnace Slag and Production of High Acidity Coefficient Slag Wool Fibers -- Reduction Behavior of Ternary Calcium Ferrites for CaO-Fe2O3-MgO System -- Propagation of Power Ultrasound in Calcium Ferrite Melt -- Part 6. Characterization of Polymer and Composite Materials -- Dynamic-mechanical Analysis of Epoxy Composites Reinforced with PALF Fibers -- Characterization of PCBs from Obsolete Computers Aiming the Recovery of Precious Metals -- IZOD Impact Test Comparative Analyzis of Epoxy and Polyester Matrix Composites Reinforced with Hemp Fibers -- Effect of Neomycin in PVP Hydrogel as Wound Dressing -- Comparative Mechanical Analysis of Epoxy Composite Reinforced with Malva/Jute Hybrid Fabric by Izod and Charpy Impact Test -- Comparison Between Epoxy Matrix Composites Reinforced with Ramie Fabric under Pressure and Vacuum -- Charpy Impact Test in Polyester Matrix Composites Reinforced With Hybrid Blanket of the Jute and Malva Fibers -- Part 7. Analysis of Surfaces and Interfaces -- Applications of Aberration-corrected Low-energy Electron Microscopy for Metal Surfaces -- ZnO Thin Films of Flowered-Fibrous Micro/Nanowebs on Glass Substrates Using the Spray Pyrolysis Method -- Intergranular Cracking of High Strength Alloyed Brass Rods -- Part 8. Mechanical Behaviors of Materials -- Determination of Microstructure-based Constitutive Models Using Temperature Rise Distribution in Plane Strain Machining -- Precipitating Behaviour of Second Phase Particles in Lightweight Fe-Mn-Al-C-N Stainless Steel -- Local Texture Evolution and Mechanical Performance of Ultra-High-Speed Friction Stir Weld of AA 6111-T4 sheets -- Part 9. Characterization of Powder Materials -- Characterization of HPGR Pre-treated Sinter Feed -- Thermogravimetric Analysis on Reduction Behavior of Powdery Dicalcium Ferrite -- Study on Application of Iron Ore Fine in Pelletizing -- Characterization of Different Clays for the Optimization of Mixtures for the Production of Ceramic Artifacts -- Part 10. Mineral Processing and Analysis -- Structural, Spectroscopic, Magnetic, and Thermal Characterizations of a Magnetite Ore from the Nagaland Region, India -- Humic Acid-based Silica Composite Aerogels--A Preliminary Study -- Characterization of Non-covalently Functionalized Halloysite -- Synchrotron-based XRD and XANES Study of Bornite Leached by Mesophilic Mixed Bacteria -- Adsorption and Surface Area of Bentonite Modified Used as Bleaching Clay -- Investigation for Removal of Organic Carbon from Carbonaceous Copper Sulphide Ore and Improving the Recovery of Copper through Flotation -- Part 11. Nanostructure and Characterization of Materials -- Microwave Synthesis of Co-Ni Ferrite/Graphene Nanocomposite for Microwave Absorption -- Evaluation of Urea Encapsulation by Microcapsules of PHB/MMT and PHB/OMMT Nanocomposites -- Part 12. Thermal Processing and Analysis -- Buildup Formation Mechanism of Carbon Sleeve in Continuous Annealing Furnace for Silicon Steel -- Pulse Parameter Characterization in Microdrilling of Maraging Steel 300 Alloy -- Characterization of Coke-making Coals of High Reactivity from Northwest China -- The Anodic Behavior of Electro-Deoxidation of Titanium Dioxide in Calcium Chloride Molten Salt -- Part 13. Poster Session -- Addition of Dregs in Mixed Mortar: Evaluation of Physical and Mechanical Properties -- Adhesion Study at Advanced Ages in Multipurpose Mortars -- Applications and Opportunities of Nanomaterials in Construction and Infrastructure -- Automated Optical Serial Sectioning Analysis of Phases in a Medium Carbon Steel -- Characterization of a Brazilian Bentonite for its Use in the Oil and Gas Industry -- Characterization of Tensile Properties of Epoxy Matrix Composites Reinforced with Fique Fabric Fiber -- Clay Smectite Synthetic: Characterization and Application in Nanocomposites -- Comparison of Performance between Granite Waste Pigments Based Paints and Soils Pigments Based Paints -- Development and Characterization of Recycled-HDPE/EVA Foam Reinforced with Babassu Coconut Epicarp Fiber Residues -- Evaluation of Microcapsules of PBSL/MMT-K and PBSL/OMMT-K Nanocomposites -- Evaluation of the Quality of Concrete with Waste of Construction and Demolition -- Evaluation of Two Different Pulsed Plasma Nitriding Conditions on Steel Properties -- Flexural Mechanical Characterization of Polyester Composites Reinforced with Jute Fabric -- Influence of Coupling Agent on the Modification Effects of Vanadium Tailing as a Polymer Filler -- Influence of Electron-beam Irradiation on the Properties of LDPE/EDPM Blend Foams -- Influence of the Areal Density of Layers in the Ballistic Response of a Multilayered Armor System Using Box-behnken Statistical Design -- Influence of the Blocks and Mortar’s Compressive Strength on the Flexural Bond Strength of Concrete Masonry -- Influence of Two Solubilization Conditions at 718 Superalloy Hardness and Microstructure -- Irradiation Influence on the Properties of HMS-Polypropylene Clay/AgNPs Nanocomposites -- Limit Speed Analysis and Absorbed Energy in Multilayer Armor with Epoxy Composite Reinforced with Mallow Fibers and Mallow and Jute Hybrid Fabric -- Mechanical, Thermal and Electrical Properties of Polymer (Ethylene Terephthalate - PET) Filled with Carbon Black -- Mineralogical Analysis of A Chrome Ore from South Africa -- Pilot Trial of Detoxification of Chromium Slag in Cyclone Furnace and Preparation of Glass-ceramics with the water-quenched melt -- Preparation of Refractory Material from Ferronickel Slag -- Process Improvement Study on the Gradation Uniformity of Steel Slag Asphalt Concrete Aggregate -- Research on the Interaction of Humic Acid with Iron Minerals -- Study of Different Process Additives Applied to Polypropylene -- Study of the Durability of Mortars with Effluent Sludge from Paper Industry Exposed to Salt Spray -- Study of the Incorporation of Residue of Ornamental Rocks in Ceramic Tiles -- Study of the Incorporation of Smectite in Powder Coating -- Study of the Mineralogical Composition of the Tailings of Coscotitlán, Hidalgo, Mexico -- The Influence of Clay Reinforcement on the Properties of Recycled Polymer Foams -- The Quality of Tiles in Red Ceramic in Northwest of Rio de Janeiro and Southeast of Minas Gerais. |
| Record Nr. | UNINA-9910298601703321 |
| Cham : , : Springer International Publishing : , : Imprint : Springer, , 2018 | ||
| Materiale a stampa | ||
| Lo trovi qui: Univ. Federico II | ||
| ||
Characterization of Minerals, Metals, and Materials 2024 : Process–Structure–Property Relations and New Technologies / / edited by Zhiwei Peng, Mingming Zhang, Jian Li, Bowen Li, Sergio Neves Monteiro, Rajiv Soman, Jiann-Yang Hwang, Yunus Eren Kalay, Juan P. Escobedo-Diaz, John S. Carpenter, Andrew D. Brown, Shadia Ikhmayies
| Characterization of Minerals, Metals, and Materials 2024 : Process–Structure–Property Relations and New Technologies / / edited by Zhiwei Peng, Mingming Zhang, Jian Li, Bowen Li, Sergio Neves Monteiro, Rajiv Soman, Jiann-Yang Hwang, Yunus Eren Kalay, Juan P. Escobedo-Diaz, John S. Carpenter, Andrew D. Brown, Shadia Ikhmayies |
| Edizione | [1st ed. 2024.] |
| Pubbl/distr/stampa | Cham : , : Springer Nature Switzerland : , : Imprint : Springer, , 2024 |
| Descrizione fisica | 1 online resource (683 pages) |
| Disciplina | 620.110287 |
| Collana | The Minerals, Metals & Materials Series |
| Soggetto topico |
Metals
Materials - Analysis Materials - Fatigue Mineralogy Materials science Metals and Alloys Materials Characterization Technique Materials Fatigue Materials Science |
| ISBN | 3-031-50304-X |
| Formato | Materiale a stampa |
| Livello bibliografico | Monografia |
| Lingua di pubblicazione | eng |
| Nota di contenuto |
Intro -- Preface -- Contents -- About the Editors -- Part I Advanced Characterization Methods I -- 1 Effect of Si on Microstructural and Magnetic Behaviour of Heat-Treated High Carbon Steel -- 2 Estimation Prediction of CaO-SiO₂-FeₓO Slag System Based on Microstructure Analysis -- 3 Optimization of Energy Efficiency of Electric Arc Furnace Steelmaking -- Part II Advanced Characterization Methods II -- 4 Numerical Multi-field Coupling Simulation of Multiple Slab Stacks Heated by Natural Gas Combustion in a Trolley Furnace -- 5 Characterization of Mechanical Properties of Viscoelastic Materials Through Experimental Modal Tests Using an Inverse Technique -- Part III Mineralogical Analysis and Process Improvement -- 6 Microwave and Conventional Carbothermic Reduction of Chromite Ore: A Comparison -- 7 Upgrading Iron Ore by Microwave Desulfurization with Reduction of Harmful SO₂ Emission -- 8 Characterisation and Pre-concentration of a Pegmatite Columbite Ore for Niobium Extraction -- Part IV Metallurgical Processing Analysis and Characterization -- 9 Soda-Ash Roasting Behavior of Ludwigite Ore Under Different Oxygen Concentrations -- 10 Effect of Pretreatment During Leaching of Chambishi Copper-Cobalt Air Roast-Leach Calcine Residue -- 11 Assessing MgO/Al₂O₃ Effect on Limonitic Laterite Sintering Process -- 12 Separation of Iron and Phosphorus from High-Phosphorus Oolitic Hematite Using Direct Reduction and Magnetic Separation -- 13 Technology Development and Process Optimization of Bottom-Blowing O₂-CO₂-CaO in Dephosphorization Converter -- 14 Production of Zinc Oxide from Willemite Containing Ore from Kabwe Town in Zambia -- 15 In Situ Method to Study the Dissolution of Ti(C,N) Inclusion in Molten Mold Flux -- 16 Developing Bottom-Blowing O₂-CaO Control Model for Converter Steelmaking Process.
17 Emission Characteristics of SO₂ During Roasting of Iron Ore Pellets -- 18 Reduction of Zn-Bearing Dust Using Biomass Char -- Part V Materials Processing Analysis and Characterization -- 19 Boron Removal from Prepared Rice Hulls Ash Metallurgical-Grade Silicon via Solvent Refining Process -- 20 Purification of Rutile Ore by HCl and HF Leaching -- 21 Quantitative Phase Analysis and Structural Investigation of Graphite Anode for Lithium-Ion Batteries -- Part VI Characterization of Metals -- 22 New Method for the Production of Medium-Mn Steel with Micro-segregation Bands Induced by Sub-rapid Solidification -- Part VII Characterization of Polymers, Composites, Coatings and Ceramics -- 23 Preparation of Boronized Ti6Al4V/HA Composites by Powder Sintering for Dental Applications: Effect of Mixing Method -- 24 Mechanical Properties and EMI-Shielding Efficiencies of Graphite and Iron(II) Oxide-Filled Polypropylene and Polyethylene-Based Polymer Composites -- 25 Phosphoric Acid Leaching of Ni-Co-Fe Powder Derived from Limonitic Laterite Ore -- 26 Preparation of Forsterite-Spinel Refractory from MgO-Rich Residue Derived from Ludwigite Ore -- 27 Chemically Bonded Phosphate Ceramics and Their Composites -- 28 Characterization and Modelling of Triply Periodic Minimum Surface (TPMS) Lattice Structures for Energy Absorption in Automotive Applications -- 29 Microwave-Assisted Reduction Behaviors of Spent Cathode Material with Biochar -- Part VIII Poster Session -- 30 Characterisation of 3D-Printed Auxetic Structures Under Low Velocity Blunt Force Impact for the Minimisation of Traumatic Brain Injury in Sport -- 31 Characterization of a Zeolite Obtained by Means of a Hydrothermal Synthesis Process -- 32 Characterization of Bacterial Cellulose from Kombucha as a Potential Resource for Its Application on Biodegradable Films. 33 Characterization of Properties of Ceramic Mass Structural Masonry -- 34 Concrete Using Crushed Rubber as a Substitute for Fine Aggregate -- 35 Cryogenic Toughness of Austenitic Stainless Steels After Aging -- 36 Effect of Aqueous Ferrous Ion on Collectorless Flotation of Pyrite -- 37 Effect of Hematite Concentrate on Iron Ore Pellet Quality -- 38 Effect of Raw Material Size on Sintering Quality -- 39 Effects of the Rice Husk Ashes and Titanium Dioxide on Properties of ABS Composites Parts Obtained by 3D Printing -- 40 Evaluation of Geopolymer Composites, Based on Red Mud and Metakaolin, for Building Application -- 41 Evaluation of the Mechanical Properties of Geopolymers Manufactured in Molds of Different Sizes -- 42 Evaluation of the Performance of Sustainable Paints Using Red Mud -- 43 Evaluation of the Properties in the Fresh and Hardened State of a Metakaolin Geopolymeric Mortar Reinforced with Açaí Fibers -- 44 Evaluation of the Properties of Red Ceramics Prepared with Ornamental Rock -- 45 Experimental Investigation of the Factors Affecting Performance of Firefighters' Protective Clothing -- 46 Experimental Investigation on Electroslag System for C-HRA-3 Heat-Resistant Alloy -- 47 Formation of Solid Solutions of BaTiO₃ Doped with Eu³⁺ by Solid-State Reaction -- 48 Homogenizing Treatment of AISI 420 Stainless and AISI 8620 Steels -- 49 Improving the Reduction Swelling Behavior of Fired Hematite Pellets by Increasing Basicity -- 50 Influence of Ordinary Portland Cement (OPC) During Collectorless Flotation of Galena -- 51 Intensifying Acid Leaching Behaviors of Fe, Ni, and Cr from Stainless-Steel Scraps via Ultrasonic Treatment -- 52 Modelling and Simulation of the Scrap Melting in the Consteel EAF -- 53 Mortar Rheology with Partial Replacement of Lime with Dredging Residue. 54 Nucleation of One Single Sn Droplet on Al Thin Film Explored by Nanocalorimetry -- 55 Numerical Simulation of Scrap Preheating with Flue Gas in EAF Steelmaking Process -- 56 Obtaining Ferroelectric Tetragonal Phase Type Ba₁₋₃ₓLa₂ₓTi₁₋₃ₓBi₄ₓO₃ (0 < -- x < -- 0.0075) Using the Mechanical Grinding Method -- 57 Performance Evaluation of Açaí Fiber as Reinforcement in Coating Mortars -- 58 Phase Equilibrium in Solid Solutions of BaTiO₃ Doped with Eu³⁺ and Gd³⁺ -- 59 Development of Artificial Granite with Epoxy Resin Matrix Mixed with Cashew Nut Shell Liquid -- 60 Preparation and Characterization of 3D Printed Biobased Composites from a PBAT/PLA Blend with Lignin and Titanium Dioxide -- 61 Process Mineralogical Analysis of a Typical Vanadium Titano-magnetite Concentrate -- 62 Production and Characterization of Artificial Stone for the Making of Permeable Pavement -- 63 Reducing MgO Content of Blast Furnace Slag -- 64 Reaction Mechanism in EAF Steelmaking Process Based on Selective Oxidation, Bath Stirring and Furnace Body Heat Transfer -- 65 Surface Activation and Directional Modification in the Technological Properties of Natural Perovskite Under the Action of High-Power Electromagnetic Pulses -- 66 Synthesis and Characterization of TiO₂ Nanoparticles by Green Chemistry, Using Aloe Vera -- 67 Use of Red Mud in Soil Stabilization for Pavement Through Alkali Activation -- Author Index -- Subject Index. |
| Record Nr. | UNINA-9910831499603321 |
| Cham : , : Springer Nature Switzerland : , : Imprint : Springer, , 2024 | ||
| Materiale a stampa | ||
| Lo trovi qui: Univ. Federico II | ||
| ||