Advances in thermal engineering, manufacturing, and production management : select proceedings of ICTEMA 2020 / / editors, Sadhan Kumar Ghosh [et al.] |
Pubbl/distr/stampa | Singapore : , : Springer, , [2021] |
Descrizione fisica | 1 online resource (xvii, 404 pages) : illustrations (some color) |
Disciplina | 621.402 |
Collana | Lecture notes in mechanical engineering |
Soggetto topico | Heat engineering |
ISBN | 981-16-2347-3 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Intro -- Organizing Committee -- Preface -- Contents -- About the Editors -- Numerical Analysis of Heat Transfer Characteristics Under Single-Jet Air Impingement -- 1 Introduction -- 2 Numerical Analysis -- 2.1 Mathematical Model -- 2.2 Geometry -- 2.3 Solver -- 3 Results and Discussion -- 3.1 Effect of Turbulence Models -- 3.2 Effect of Turbulent Prandtl Number -- 3.3 Effect of Near Wall Functions -- 4 Conclusion -- References -- Effect of Liquid Bridge Volume on Cohesive Sediment Motion -- 1 Introduction -- 2 Model Frameworks and Freebody Diagram -- 3 Escape Velocity Calculations -- 3.1 Input Parameters of the Model -- 4 Results and Discussion -- 5 Conclusions -- References -- Boiling Behavior of Iso-Butane on a Horizontal Plain Tube -- 1 Introduction -- 2 Experimental Apparatus -- 3 Results and Discussions -- 4 Conclusions -- References -- MHD Thermal Convection of Nanofluid Saturated Porous Cavity Heated Linearly -- 1 Introduction -- 2 Problem Formulation -- 2.1 Problem Descriptions -- 2.2 Numerical Technique -- 3 Result and Discussions -- 3.1 Effect of Different Rayleigh Number (Ra) -- 3.2 Effect of Darcy Number (Da) -- 3.3 Impact of Hartmann Number (Ha) -- 3.4 Effect of Nanoparticle Concentration (ϕ) -- 3.5 The Heat Transfer Characteristics (Nu) -- 4 Conclusions -- References -- Natural Convection of Copper-Water Nanofluid in a Square Enclosure with an Isothermal Protruding Heater -- 1 Introduction -- 2 Mathematical Formulation -- 3 Numerical Scheme and Validation -- 4 Results and Discussion -- 4.1 Influence of Nanoparticle Volume Fraction on Vertical Velocity and Temperature Profiles -- 4.2 Influence of Nanoparticle Volume Fraction on Streamline and Isotherm Contours -- 4.3 Influence of Nanoparticle Volume Fraction on Average Nusselt Number -- 5 Conclusion -- References.
Numerical Analysis of Micro-Scale Diffusion Flame Structure Using Methane Gas as Fuel -- 1 Introduction -- 2 Numerical Model and Adopted Numerical Scheme -- 2.1 Numerical Model and Adopted Numerical Scheme -- 2.2 Governing Equations -- 2.3 Results and Discussions -- 3 Conclusion -- References -- Effect of Different Surface Types of Loading Vessel Wall on Combustion Performance of a Domestic LPG Cook Stove -- 1 Introduction -- 2 Numerical and Experimental Methodology -- 3 Results and Discussion -- 3.1 Grid Independency Test and Model Validation -- 3.2 Velocity and Temperature Distributions -- 3.3 Effect of Surface Types of the Loading Vessel Wall -- 4 Conclusion -- References -- Low-Velocity Impact Analysis of Pre-twisted Composite Sandwich Shallow Conical Shells in Hygrothermal Environment -- 1 Introduction -- 2 Theoretical Formulations -- 2.1 Governing Equations -- 2.2 Contact Law -- 3 Results and Discussions -- 3.1 Comparisons -- 3.2 Influence of Cone Length-to-Thickness Ratio -- 3.3 Influence of Initial Impact Velocity -- 4 Conclusions -- References -- Mixed Convection Condensation of Vapor with Non-condensable Gas Over a Vertical Plate: ODE-Based Integral Solution -- 1 Introduction -- 2 Mathematical Modeling -- 2.1 Physical Model Detailing -- 2.2 Governing Equations -- 2.3 ODE Systems with Eight ODEs -- 3 Results and Discussion -- 3.1 Validation of Model -- 3.2 Interface Temperature and Interface Concentration Profile -- 3.3 Effect of Free Stream Non-condensable Gas Concentration -- 4 Conclusion -- References -- Magneto-Convective Heat Transfer in a Cavity Under Partial Magnetic Fields -- 1 Introduction -- 2 Problem Formulation -- 2.1 Problem Descriptions -- 2.2 Numerical Technique -- 3 Result and Discussion -- 3.1 Impact of Rayleigh Number (Ra) -- 3.2 Impact of Magnetic Field Strength (Ha). 3.3 Impact of Length of the Applied Magnetic Field (LB) -- 3.4 Effect of Different Prandtl Number (Pr) -- 3.5 Heat Transfer Analysis -- 4 Conclusions -- References -- MHD Convection in Cavity Under Partially Applied Magnetic Fields -- 1 Introduction -- 2 Problem Formulation -- 2.1 Problem Descriptions -- 2.2 Numerical Technique -- 3 Result and Discussion -- 3.1 Effect of the Partially Applied Magnetic Field -- 3.2 Effect of Different Positions in the Cavity -- 3.3 Comparison of Length of Partial Magnetic Field (LB) Over Whole Length Magnetic Field with Varying Hartmann Number (Ha) -- 3.4 Heat Transfer Analysis -- 4 Conclusions -- References -- Comparison of Thermo-Hydraulic Performance Enhancement of Liquid He-Based Cryogenic Nanofluid Flow in Turbulent Region Through Rectangular Plate Fin Heat Exchangers -- 1 Introduction -- 2 Numerical Analysis -- 2.1 Physical Description of the Model -- 2.2 Governing Equations -- 2.3 Thermophysical Properties of Nanofluid -- 2.4 Boundary Conditions -- 2.5 Meshing and Model Setup -- 2.6 Grid-Independency -- 2.7 Experimental Validation of the Model -- 3 Results and Discussion -- 4 Conclusions -- References -- Performance Study of a Small Capacity Thermoacoustic Refrigerator Using DELTA EC Software -- 1 Introduction -- 2 Working Principle -- 3 Mathematical Formulation -- 4 DELTAEC Simulations and Results -- 4.1 Stack Spacing -- 4.2 Frequency -- 4.3 Pressure Amplitude -- 4.4 Mass Flow Rate and Tube Size -- 5 Conclusion -- References -- Shifting the Focus from Macro- to Micro-waste to Energy (WTE) Plants as a Solution to the Solid Waste Management -- 1 Introduction -- 2 Literature Review -- 3 Prevalent WTE Technologies -- 3.1 Biochemical Conversion -- 3.2 Anaerobic Digestion (AD) -- 3.3 Fermentation -- 3.4 Thermo-Chemical Conversion -- 3.5 Combustion/incineration -- 3.6 Gasification -- 3.7 Pyrolysis. 4 Challenges in Macro-Level WTE Plants -- 5 Concept of Micro-generation of Power -- 6 Necessity of Micro-level WTE Plants -- 7 Conclusions -- References -- Design and Performance Evaluation of Box-Type Solar Cooker with Energy Storage -- 1 Introduction -- 2 Proposed Design -- 2.1 Description of the Proposed Box-Type Solar Cooker -- 2.2 Operation of Box-Type Solar Cooker with Phase Change Material -- 2.3 Thermal Analysis of Proposed Design -- 3 Experimental Setup and Instrumentation -- 3.1 Experimental Procedure -- 3.2 Experimental Result and Discussion -- 3.3 Cooking of Foods in Standard Cooker and PCM-Cooker -- 4 Conclusions -- References -- A Proposal for Harnessing an Alternative Source of Renewable Energy -- 1 Introduction -- 2 Underlying Basis of the Proposal -- 2.1 Materials and Arrangements -- 2.2 Biofuel: an Alternative of Petrochemical Industry -- 2.3 Theoretical Estimation of Energy -- 2.4 Banana Peel and Bioethylene -- 3 Results and Discussion -- 3.1 Working Principle -- 3.2 Possible Application Sites -- 4 Conclusion -- References -- Energy-Efficient Cooling Scheme of Power Transformer: An Innovative Approach Using Solar and Waste Heat Energy Technology -- 1 Introduction -- 2 Literature Survey -- 3 Necessity of Cooling for Transformer -- 3.1 Mathematical Form to Determine Transformer Temperature Level -- 4 Evolution in Transformer Cooling Techniques -- 5 Design and Fabrication of the Proposed System -- 6 Algorithm -- 7 Future Scope -- 7.1 Salient Features -- 7.2 Future Challenges -- 8 Conclusion -- References -- Investigation of a Solar Concentrator for Water Distillation -- 1 Introduction -- 2 Dish Solar Concentrator and Receivers -- 3 Experimental Study -- 3.1 Set-up -- 3.2 Thermal Profiles -- 4 Results and Discussion -- 5 Conclusion -- References -- Floating Photovoltaic Plant in India: Current Status and Future Prospect. 1 Introduction -- 2 FPV Technology -- 2.1 Major Components -- 2.2 Benefits of FPV Plant -- 2.3 Challenges -- 3 Global Scenarios -- 4 FPV Plant in India -- 4.1 Present Status -- 4.2 Projects Under Development -- 4.3 Recent Projects Proposal -- 5 Future Prospect -- 6 Conclusion and Remarks -- References -- Friction Coefficient Analysis of Nano-crystalline TiO2-Added Alumina Ceramics -- 1 Introduction -- 2 Materials and Methodology -- 2.1 Materials -- 2.2 Synthesis of Nano-crystalline TiO2Powder -- 2.3 Densification -- 2.4 Tribological Testing -- 3 Results and Discussion -- 3.1 Computation of Frictional Coefficient in Relation with Sliding Frequency and Normal Load -- 3.2 Validation of the Proposed Algorithm -- 4 Conclusions -- References -- Thermal and Rheological Behaviour of a Wax Based Binder and an Alumina Feedstock for Micro-PIM Application -- 1 Introduction -- 2 Materials Used -- 3 Experimental Procedure -- 4 Results and Discussion -- 4.1 Thermogravimetry Analysis (TGA) -- 4.2 Differential Scanning Calorimetry (DSC) -- 4.3 Specific Heat (Cp) and Latent Heat of Solidification -- 4.4 Thermal Diffusivity and Conductivity -- 4.5 Rheology of Binder -- 4.6 Rheology of Feedstock -- 4.7 Component Development -- 5 Conclusion -- References -- Alumina Based Cutting Tools-A Review -- 1 Introduction -- 2 Some Initial Breakthroughs and Development -- 2.1 Machining of Alumina-Boron Carbide (Composite) Cutting Tool -- 2.2 Machining Detail of Silicon-Carbide Whisker Reinforced Cutting Tool -- 2.3 Machining Detail of Zirconia Toughened ACT -- 2.4 Machining Details of ACTs on Ultra High Strength Steel -- 3 Performance of Some Important ACTs -- 4 Performance on Specifically Steel Work-Pieces -- 5 Performance on Specific Alloy Based Materials -- 6 Modern Fabrication and Coating -- 7 Conclusions -- References. Deposition of Duplex and Multilayer Electroless Ni-P/Ni-B Coating and Study of Their Wear Resistance. |
Record Nr. | UNINA-9910488701103321 |
Singapore : , : Springer, , [2021] | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Bioresource Utilization and Bioprocess [[electronic resource] /] / edited by Sadhan Kumar Ghosh, Ramakrishna Sen, H. N. Chanakya, Agamuthu Pariatamby |
Edizione | [1st ed. 2020.] |
Pubbl/distr/stampa | Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 |
Descrizione fisica | 1 online resource (XIV, 273 p. 137 illus., 118 illus. in color.) |
Disciplina | 662.8 |
Soggetto topico |
Waste management
Environmental engineering Biotechnology Biochemical engineering Biomedical engineering Cell culture Waste Management/Waste Technology Environmental Engineering/Biotechnology Biochemical Engineering Biomedical Engineering/Biotechnology Cell Culture |
ISBN | 981-15-1607-3 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Chapter 1. A Comprehensive Study of Food Waste to Biogas Plant: Paths to Improve the Performance – A Case Study -- Chapter 2. Resource Recovery From Organic Fraction Of Municipal Solid Waste Using Anaerobic Digestion And Hydrothermal Carbonisation -- Chapter 3. Effect of Inoculation on Anaerobic Digestion of Food Waste -- Chapter 4. Bio Sorption of Cr (VI) From Aqueous Solutions by Pericarp of Pongamia Pinnata -- Chapter 5. A Comparative Study of the Fuel Characteristics between Algal Biodiesel and Petro-Diesel -- Chapter 6. Production of Bioethanol from Green Alga Chlorella Vulgaris: An Important Approach to Utilize Algal Feedstock or Waste -- Chapter 7. Biogas Production from Fat, Oil, Grease and Effect of Pre-Treatment -- Chapter 8. Predicting Biomethanation Pattern from Feedstock Composition for Biomass Residues -- Chapter 9. Yield Improvement of Biodiesel from Chlorella Vulgaris by Media Optimisation and Transesterfication -- Chapter 10. Synthesis of Cellulose from Peanut Shell Waste and its use in Bioethanol Production. |
Record Nr. | UNINA-9910383818103321 |
Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Circular Economy and Fly Ash Management [[electronic resource] /] / edited by Sadhan Kumar Ghosh, Vimal Kumar |
Edizione | [1st ed. 2020.] |
Pubbl/distr/stampa | Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 |
Descrizione fisica | 1 online resource (xv, 160 pages) : illustrations |
Disciplina | 363.7288 |
Soggetto topico |
Waste management
Energy policy Energy and state Sustainable development Pollution prevention Air pollution Waste Management/Waste Technology Energy Policy, Economics and Management Sustainable Development Industrial Pollution Prevention Atmospheric Protection/Air Quality Control/Air Pollution |
ISBN | 981-15-0014-2 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Handling and Utilization of Fly Ash from Thermal Power Plants -- Scope of Fly ash Application as a Replacement for Chemical Pesticides for Pest Control in Certain Crop Pockets of Neyveli and Virudhachalam Regions in Tamil Nadu -- Fly Ash and its Utilisation in Agriculture: Constraints and Opportunities -- Carbon and Nutrient Sequestration Potential of Coal Based Fly Ash Zeolites -- Pesticidal Activity and Future Scenario of Fly ash Dust and Fly ash Based Herbal Pesticides in Agriculture, Household, Poultry and Grains in Storage -- Synthesis, Quality Assay and Assessment of Fly Ash Based Chemical Pesticides for Efficacy against Pests of Crops, Stored Commodities and in Urban Areas -- Potential and Futuristic of Fly Ash Nano-Particle Technology in Pest Control in Agriculture and Synthesis of Chemical and Herbal Insecticides Formulations -- Behaviour of Fly Ash Concrete at High Temperatures -- Effect of Fly Ash on Strength of Concrete -- Potential of Silica Sources Including Fly Ash as Green Technology Inputs To Induce Resistance to Biotic and Abiotic Stresses in Crop Plants: Overview -- Fly ash as a source of Silicon for Mitigating Biotic Stress and improving yield and changes in Biochemical Constituents and Silicon in Rice under Abiotic Stress -- Effective Utilization of Industrial Waste (Fly Ash) for Vermicompost Production by employing Eisenia Fetida. |
Record Nr. | UNINA-9910366635203321 |
Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Circular Economy: Global Perspective [[electronic resource] /] / edited by Sadhan Kumar Ghosh |
Edizione | [1st ed. 2020.] |
Pubbl/distr/stampa | Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 |
Descrizione fisica | 1 online resource (XIV, 452 p. 121 illus., 105 illus. in color.) |
Disciplina |
363.728
628.4 |
Soggetto topico |
Waste management
Energy policy Energy and state Sustainable development Economic policy Pollution prevention Air pollution Waste Management/Waste Technology Energy Policy, Economics and Management Sustainable Development Economic Policy Industrial Pollution Prevention Atmospheric Protection/Air Quality Control/Air Pollution |
ISBN | 981-15-1052-0 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Introduction -- Circular Economy -- The Development of a Circular Economy in Australia -- Circular Economy in Bhutan -- Circular Economy in Canada -- Circular economy in China -- Global Status of Implementation of Circular Economy(GSICE) Germany -- Solid Waste Management in Lao PDR: A Pathway toward the CE -- Circular Economy for Sustainable Resource Management in India -- Circular Economy - Situation in Israel -- Circular Economy in Italy -- Circular Economy in Kenya -- Circular Economy in Malaysia -- An Overview of Circular Economy in Mauritius -- Circular Economy in Nigeria -- Circular Economy of Municipal Solid Waste (MSW) in S. Korea -- Circular Economy in Russian Federation -- Circular Economy for Sustainable Resource Management: The Case of Packaging Waste Sector in Thailand -- Developing the Circular Economy in the European Union -- Circular Economy in Vietnam. |
Record Nr. | UNINA-9910366637103321 |
Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Emerging Technologies for Waste Valorization and Environmental Protection [[electronic resource] /] / edited by Sadhan Kumar Ghosh, Chiranjib Bhattacharya, Suggala V. Satyanarayana, S. Varadarajan |
Edizione | [1st ed. 2020.] |
Pubbl/distr/stampa | Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 |
Descrizione fisica | 1 online resource (XIV, 144 p. 66 illus., 50 illus. in color.) |
Disciplina | 929.374 |
Soggetto topico |
Waste management
Sustainable development Chemical engineering Environmental economics Waste Management/Waste Technology Sustainable Development Industrial Chemistry/Chemical Engineering Environmental Economics |
ISBN | 981-15-5736-5 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Chapter 1. Bird Diversity in the Mining Area of Bellary-Hospet Region, Karnataka, India -- Chapter 2. IOT Based Waste Management System through Cloud Computing and WSN -- Chapter 3. A Study on Selection of the Biofilm for the Hybrid Up-Flow Anaerobic Sludge Blanket (Huasb) Reactor Using the Computational Fluid Dynamics (CFD) Analysis -- Chapter 4. Experimental Investigations on the combined effect of TiO2 Nano additive and EGR on Engine Performance by using Mimusops Elangi Biodiesel Blend -- Chapter 5. Production and Application of chitosanases in Valorization of Crustacean Waste to Wealth -- Chapter 6. Capture of CO2 from Automobile exhaust by using Physical Adsorption Technique -- Chapter 7. Chemical Characterization and Environmental Implications of Recycled Sewage Sludge in the Proximity Soil of Treatment Plant -- Chapter 8. Novel Techniques of Synthesis of Nano-Cellulose from Sugarcane Bagasse and Its Applications in Dye Removal -- Chapter 9. Assessment of Greenhouse Gases and Perception of Communities on Emissions from the Largest Dumpsite in Africa -- Chapter 10. Performance Analysis of Treatment of Distillery Spent-wash Using EGSB Reactor with Addition of Iron and Manganese. |
Record Nr. | UNINA-9910416145703321 |
Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Energy Recovery Processes from Wastes [[electronic resource] /] / edited by Sadhan Kumar Ghosh |
Edizione | [1st ed. 2020.] |
Pubbl/distr/stampa | Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 |
Descrizione fisica | 1 online resource (XVI, 250 p. 99 illus., 78 illus. in color.) |
Disciplina |
363.728
628.4 |
Soggetto topico |
Waste management
Renewable energy resources Energy policy Energy and state Waste Management/Waste Technology Renewable and Green Energy Energy Policy, Economics and Management |
ISBN | 981-329-228-8 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Chapter 1. 3-Stage Reactor Design to Convert MSW to Methanol -- Chapter 2. PCDD/PCDFs: A Burden From Hospital Waste Disposal Plant; Plasma Arc Gasification Is the Ultimate Solution for Its Mitigation -- Chapter 3. Catalytic and Non Catalytic Thermolysis of Waste Polystyrene for Recovery of Fuel Grade Products and their Characterization -- Chapter 4. Energy Recovery from Tyre Waste Pyrolysis: Product Yield Analysis and Characterization -- Chapter 5. Solid State Gas Fermenter to Convert Syn-Gas to Methanen -- Chapter 6. Conceptual approach of a Solar Thermal Steam Generator and its Design & Optimization -- Chapter 7. Generation of Energy from Waste Management -- Chapter 8. Influence of Pyrogallol (PY) Antioxidant in the Fuel Stability of Alexandrian Laurel Biodiesel -- Chapter 9. Investigation on Engine Characteristics Powered with Waste HDPE Oil Obtained from Catalytic Pyrolysis and Study on NOx Emission Variation using Thermal Imager -- Chapter 10. Application of Artificial Intelligence to Predict the Engine Performance and Emission Paradigm Fuelled with Diesel-Biodiesel Blends -- Chapter 11. Comparative Analysis of Experimental and Simulated Performance and Emissions of Compression Ignition Engine Using Biodiesel Blends -- Chapter 12. Modelling and Simulation of Biodiesel from Various Feed Stocks into Compression Ignition Engine -- Chapter 13. Sesame Stalk as a Feedstock for Thermo-chemical Conversion: Products Distribution and Characterization -- Chapter 14. Temperature Influence on Quality and Yield of Pyrolytic Products of Seedcake of KayeaAssamica -- Chapter 15. Recycling Industrial Waste for Production of Bioethanol. |
Record Nr. | UNINA-9910366648103321 |
Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Health care waste management and COVID 19 pandemic : policy, implementation status and vaccine management / / Sadhan K. Ghosh, P. Agamuthu, editors |
Pubbl/distr/stampa | Singapore : , : Springer, , [2022] |
Descrizione fisica | 1 online resource (348 pages) |
Disciplina | 616.2414 |
Soggetto topico |
COVID-19 Pandemic, 2020-
Health facilities - Waste disposal Medical wastes |
ISBN | 981-16-9336-6 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Intro -- Contents -- Part I: COVID 19 Waste Management and Cultural Perspectives -- Waste Management During Pandemic of COVID-19 in India, Italy, and the USA: The Influence of Cultural Perspectives -- 1 Introduction -- 2 Materials and Methods -- 2.1 The Italian Scenario -- 2.2 The USA Scenario -- 2.3 The Indian Scenario -- 2.3.1 Present Situation -- 2.3.2 Challenges -- 2.3.3 Actions Taken -- 2.3.4 Legislative Guidelines in India for SARS-CoV-2 Generated Wastes -- 2.3.5 COVID-19 Second Wave -- 2.4 Discussion and Analysis -- 2.5 Conclusion -- References -- Part II: Health Care Waste Management and Case Studies -- Clinical Waste Management in Malaysia and COVID-19 Waste Management Case Study -- 1 Introduction and Definition -- 2 Policy/Regulations/Guidelines in Malaysia on Clinical Waste -- 2.1 Policy and Regulations -- 3 Generation of Clinical Waste -- 4 Composition of Clinical Waste in Malaysia -- 5 Management of Clinical Waste -- 5.1 Privatization and Companies Involved -- 5.2 Collection of Clinical Waste -- 5.3 Treatment of Clinical Waste -- 5.4 Ash Management by Kualiti Alam -- 5.5 Additional Regulation -- 6 COVID-19 and Clinical Waste -- 6.1 COVID-19 Variants -- 6.2 COVID-19 Vaccine -- 6.3 Generation of COVID-19 Related Clinical Waste -- 6.4 COVID-19 and Composition of Clinical Waste -- 6.5 COVID-19 and Household Clinical Waste Management -- 7 COVID-19 Clinical Waste Management: A Case Study -- 7.1 Management of COVID-19 Clinical Waste at the Hospital -- 7.1.1 Amount of Clinical Waste Generated -- 7.1.2 Source Separation of Clinical waste -- 7.1.3 Storage of Clinical Waste -- 7.1.4 Transport and Treatment of Clinical Waste -- 7.1.5 Training Related to Management of Clinical Waste Related to COVID-19 -- 7.1.6 Personal Protective Equipment (PPE) -- 8 Conclusion -- References.
Waste Management Related to COVID-19 in the Noncontact Era: Case Study of the Republic of Korea -- 1 Introduction -- 2 Current Status of COVID-19 Pandemic in Korea -- 2.1 Status on the Spread of COVID-19 -- 2.2 Lifestyle Change in Noncontact Society -- 2.3 Changes in Household Waste Generation in COVID-19 Pandemic -- 3 Medical Waste Management in Korea -- 3.1 Classification of Medical Waste -- 3.2 Medical Waste Generation -- 3.3 Management of Medical Waste -- 3.4 Management of Isolated Medical Waste Related to COVID-19 -- 4 The Waste of Personal Protective Equipment -- 4.1 Source for the Waste Personal Protective Equipment (PPE) -- 4.2 The Waste PPE Generation -- 4.3 Management of the Waste PPE -- 5 Issues and Perspectives of Waste Related to COVID-19 -- References -- Healthcare Waste Management and Post-Pandemic Countermeasures: The Case of the Philippines -- 1 Introduction -- 2 Objectives -- 3 Brief Background of the Philippines -- 4 Definition and Categories of Healthcare Wastes in the Philippines -- 5 Policies and Regulations on Managing Healthcare Waste in the Philippines -- 5.1 Issues and Challenges in the Implementation of Health Care Waste Management Policies and Regulations -- 6 Healthcare Waste Management System in the Philippines -- 6.1 HCW Management Planning -- 6.2 HCW Minimization -- 6.3 HCW Segregation, Collection, Storage, and Transport -- 6.4 Health Care Waste Treatment and Disposal -- 6.4.1 Healthcare Waste Generation Before Pandemic -- 6.4.2 Healthcare Waste Disposal Before Pandemic -- 6.4.3 Healthcare Waste Generation During Pandemic -- 6.4.4 Healthcare Waste Disposal During Pandemic -- 6.5 Issues and Challenges on the Health Care Waste Management System -- 6.5.1 Rapid Increase in the Amount of Healthcare Wastes -- 6.5.2 Improper Handling and Management of Waste. 6.5.3 Lack of Institutional Capacity and Weak Coordination Among National Agencies -- 6.5.4 Lack of Awareness -- 7 Post-Pandemic Countermeasures/Innovations in Managing Healthcare Waste: Lessons from Selected Cases -- 7.1 Department of Health: Mitigation, Preparedness, and Recovery -- 7.2 Department of Environment and Natural Resources (DENR)-Mitigation, IEC -- 7.3 LGU Initiative: The Case of Pasig City Using Community-focused Strategy -- 7.3.1 Monitoring, Preparedness, Recovery, Strengthening of RA 9003, and Elimination of Single Use Plastic -- 7.4 Healthcare Without Harm-IEC -- 7.5 Opportunities/Lessons Learned (Direct and Indirect Opportunities) -- 8 Conclusion and Recommendations -- References -- Part III: Management of Non-Medical Waste Infected by SARS-CoV-2 -- The Immediate Italian Response to the Management of Non-medical Waste Potentially Infected by SARS-CoV-2 During the Emergency ... -- 1 Introduction -- 2 Waste Management -- 2.1 Waste Packing and Delivering by the Users -- 2.2 Waste Transport -- 2.3 Waste Treatment -- 3 Communication Strategy -- 4 Conclusion -- References -- Part IV: Health Care Waste Management During Pre- and Post-COVID-19 Scenario -- Overview of Infectious Healthcare Waste Management in Thailand in Pre- and During COVID-19 Context -- 1 Introduction: Healthcare Facilities, Healthcare Coverage, and Medical Tourism in Thailand -- 1.1 Healthcare Facilities -- 1.2 Healthcare Coverage -- 1.3 Medical Tourism -- 2 Healthcare Waste (HCW): Definition, Institutional, and Policy Frameworks -- 2.1 Defining Healthcare Waste -- 2.2 Institutional Arrangements for HCW Management in Thailand -- 2.3 Legal Frameworks for HCW Management in Thailand -- 3 Pre-COVID-19 Healthcare Waste Generation in Thailand -- 4 Healthcare Waste Management Practices in Pre-COVID Times -- 4.1 Collection, Storage, and Transportation. 4.1.1 Segregation and Collection -- 4.1.2 Storage and Training of Healthcare Waste Management Personnel -- 4.1.3 Personal Protective Equipment -- 4.1.4 Transportation -- 4.1.5 Transport Trolleys -- 4.2 Treatment and Disposal of HCW -- 4.2.1 Healthcare Waste Management Methods and Treatment Technologies -- 5 Issues Related to Healthcare Waste Management -- 6 Impacts of COVID-19 Pandemic on Thai Healthcare Management in Thailand -- 7 Conclusions -- References -- Health Care Waste Management in Nepal: Pre- and Post-COVID-19 Scenario -- 1 Background -- 1.1 Health Care Waste Management (HCWM) -- 1.2 Coronavirus Disease 2019 (COVID-19) and Nepal -- 1.3 Impact of Second and Third Waves of COVID-19 in Nepal -- 1.4 COVID Vaccination Management in Nepal -- 1.5 Chapter Objectives -- 2 Methods -- 2.1 HCW Categorization in Nepal -- 2.2 Significance of Proper HCWM -- 2.3 Global Pre- and Post-COVID-19 Waste Management Practices -- 2.3.1 Pre-COVID-19 HCWM Scenario -- 2.3.2 Post-COVID-19 Waste Management Practices -- 2.4 Nepalese HCWM Scenario -- 2.5 Hazards of Improper HCWM Practice -- 2.6 Economic Implications of HCWM -- 2.6.1 Cost of Inaction on HCWs (Hazards of Improper HCWM) -- 2.6.2 Cost of HCWM -- 2.7 Health Care Scenario in Nepal -- 2.8 Pre- and Post-COVID-19 Waste Management Practices in Nepal -- 2.8.1 Pre-COVID-19 -- 2.9 Waste Management Legislations in Nepal -- 2.10 Environment Protection Act, 2019 -- 2.11 Constitution of Nepal, 2015 -- 2.12 Health Care Waste Management Guideline, 2014 -- 2.13 Solid Waste Management Rules, 2013 -- 2.14 Solid Waste Management Act, 2011 -- 2.15 Environment Protection Rules, 1997 (EPR, 1997) -- 2.16 Solid Waste (Management and Resource Mobilization) Act, 1987 -- 2.17 Nepal as the Signatory to the International Legislations Related to HCWM -- 2.18 Strengths and Weaknesses of Health Care Waste Management Practice in Nepal. 2.19 HCWM During Post-COVID Period -- 2.19.1 Guiding Principles for COVID-19 Related HCWM in Nepal -- 2.20 Challenges in Waste Management in the Post-COVID-19 Periods -- 3 Future Prospects -- 4 Conclusions -- References -- COVID-19 and Healthcare Waste Management (HCWM) in Myanmar: Perspectives from the Triple R (Response, Recovery, and Redesign) -- 1 Introduction -- 2 HCWM in Myanmar: Before and During the COVID-19 Pandemic -- 2.1 HCW Generation -- 2.2 Practice of HCWM -- 2.2.1 3R (Reduce, Reuse, and Recycling) -- 2.2.2 Waste Segregation, Storage, and Collection -- 2.2.3 Waste Transportation and Disposal -- 2.3 Institutional and Policy Framework -- 2.3.1 Policy Setup -- 2.3.2 Institutional Setup -- 3 Measures to Mitigate Impacts of COVID-19 in HCWM: Perspectives from the Triple R (Response, Recovery, and Redesign) -- 3.1 HCWM Sector Became more Vulnerable to the COVID-19 Pandemic -- 3.2 Planning HCWM Based on Triple R Framework (Response, Recovery, and Redesign) -- 3.2.1 Response -- 3.2.2 Recovery -- 3.2.3 Re-Design -- 4 Conclusions -- References -- Part V: Healthcare Waste Management and Impact of COVID-19 -- Healthcare Waste Management Practices in Nigeria: A Review -- 1 Introduction -- 1.1 Classification of Healthcare Wastes -- 1.1.1 Biomedical Waste in Nigeria and Their Sources -- 1.1.2 Biomedical Waste Control Laws and Policies in Nigeria -- 1.2 Major Sources of Healthcare Wastes (HCW) in Nigeria -- 1.2.1 Healthcare Facilities Location in Nigeria -- 1.3 Current Healthcare Wastes Collection and Handling Methods -- 1.3.1 Healthcare Waste Management Studies in Nigeria -- 2 Management of Healthcare Waste in Nigeria -- 2.1 Waste Incineration -- 2.2 HCW Treatment -- 2.3 Sharps -- 2.4 HCW Segregation -- 2.5 Management -- 3 Legislative Framework for Healthcare Waste Management in Nigeria -- 3.1 Challenges Faced by Nigerian Healthcare Centers. 3.2 Impacts of Poorly Managed Biomedical Waste on the Environment and Health. |
Record Nr. | UNINA-9910629288903321 |
Singapore : , : Springer, , [2022] | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Recent Trends in Waste Water Treatment and Water Resource Management [[electronic resource] /] / edited by Sadhan Kumar Ghosh, Papita Das Saha, Maria Francesco Di |
Edizione | [1st ed. 2020.] |
Pubbl/distr/stampa | Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 |
Descrizione fisica | 1 online resource (XVI, 248 p.) |
Disciplina | 628.3 |
Soggetto topico |
Water pollution
Water reuse Environmental management Water quality Waste Water Technology / Water Pollution Control / Water Management / Aquatic Pollution Waste Management/Waste Technology Water Policy/Water Governance/Water Management Water Quality/Water Pollution |
ISBN | 981-15-0706-6 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Chapter 1. Anaerobic co-digestion of sewage sludge and animal by-product -- Chapter 2. Application of Synthesized Nano-cellulose Material for Removal of Malachite Green from Waste Water -- Chapter 3. Status of Sewage Treatment in Bihar and needs for Improvement -- Chapter 4. Effluent Water Treatment: A Potential Way Out towards Conservation of Fresh Water in India -- Chapter 5. Development of an Effective and Efficient Integrated Charcoal Filter Constructed Wetland System for Wastewater Treatment -- Chapter 6. A Consolidated Stratagem towards Defenestration of Coke Oven Wastewater Using Various Advanced Techniques - An Analogous Study -- Chapter 7. Studies on Lead removal from Simulated Waste Water in Packed Bed Bioreactor Using Attached Growth Technique -- Chapter 8. Sustainable Growth and Survival of Litopenaeus Vannamei through Waste Water Recycling -- Chapter 9. Reuse of Washing Machine Effluent using Constructed Wetland: The Circular Economy of Sanitation -- Chapter 10. Removal of Methyelene Blue Dye by using Lemon Leaf Powder as a Adsorbent -- Chapter 11. Development of a Low-Cost Column Type Filter Based on Agricultural Waste for Removal of Fluoride from Water -- Chapter 12. Oxidative Photocatalytic Degradation of Methylene Blue in Waste Water -- Chapter 13. Bio remediation of Textile Azo Dyes by Marine Streptomyces -- Chapter 14. Use of Sewage to Restore Manmade Waterbodies – Nutrient and Energy Flow Regulation Approaches to Enabling Sustainability -- Chapter 15. Two Stage Passive High Throughput Sustainable Sewage Treatment Process: Lab Study and Future Scope. |
Record Nr. | UNINA-9910377840803321 |
Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Solid Waste Policies and Strategies: Issues, Challenges and Case Studies [[electronic resource] /] / edited by Sadhan Kumar Ghosh |
Edizione | [1st ed. 2020.] |
Pubbl/distr/stampa | Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 |
Descrizione fisica | 1 online resource (XIII, 221 p. 92 illus., 79 illus. in color.) |
Disciplina | 628.44 |
Soggetto topico |
Waste management
Sustainable development Natural resources Climate change Waste Management/Waste Technology Sustainable Development Natural Resource and Energy Economics Climate Change Management and Policy |
ISBN | 981-15-1543-3 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Chapter 1. Three ‘R’: An Effective Sustainable Waste Management Approach -- Chapter 2. To Study Information, Education and Communication (IEC) Campaign as a Tool to Spread Awareness in Understanding the Support of 3R Concept for Waste Minimization in Indore City as the Cleanest City of India -- Chapter 3. Pathways for Ganesha Idol Immersion Process: A Review of Best Practices by BBMP -- Chapter 4. Collapse of Natural Carcass Disposal System – Kolkata Rotten Meat Incidence: The Insight Study -- Chapter 5. Gender Transformative Planning for Urban Sanitation in India Paramita Datta Dey -- Chapter 6. Facilitating Sustainable Waste Management Strategies within the Hospital-An Explorative Study -- Chapter 7. Closing Access Loop: Situating Post-Infrastructural Assurance Circumstances -- Chapter 8. Framework for Auditing of Municipal Solid Waste Management System in India -- Chapter 9. Design of Capacity Building Strategy for Municipal Solid Waste Management (MSWM) for Andhra Pradesh – A Case Study -- Chapter 10. Experience of Swachh Bharat Mission with focus on Swachh Energy: An Experience in Silvarpatti Village of Dindigul District, Tamilnadu, India. |
Record Nr. | UNINA-9910383811303321 |
Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Sustainable Waste Management: Policies and Case Studies [[electronic resource] ] : 7th IconSWM—ISWMAW 2017, Volume 1 / / edited by Sadhan Kumar Ghosh |
Edizione | [1st ed. 2020.] |
Pubbl/distr/stampa | Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 |
Descrizione fisica | 1 online resource (XXX, 729 p. 265 illus., 205 illus. in color.) |
Disciplina |
363.728
628.4 |
Soggetto topico |
Waste management
Geotechnical engineering Environmental monitoring Waste Management/Waste Technology Geotechnical Engineering & Applied Earth Sciences Monitoring/Environmental Analysis Eliminació de residus Reciclatge de residus Seguiment ambiental |
Soggetto genere / forma |
Congressos
Llibres electrònics |
ISBN | 981-13-7071-0 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Developing the Circular Economy in South Africa: Challenges and Opportunities -- The State of Municipal Solid Waste (MSW) Management in Israel -- Assessing Livelihood and Employment Generation Opportunities in Metros Arising from Increasing Compliance with SWM Rules 2016 – A Case of Bengaluru -- Community Participation and Waste Management -- Study on Solid Waste Management System in Dindigul Corporation of Tamilnadu and Feasibility Analysis on Waste to Energy Projects -- Dakshin Dilli Swachh Initiatives Limited: A Comprehensive Approach towards Sustainable Waste Management -- Contemporary Focuses on Integrated Solid Waste Management System through Small Scale Onsite Composting for Educational Institution -- Evaluation of Calorific of Municipal Solid Waste (MSW) -- The Assessment of Heavy Metal Pollution to Ground Environment in Landfill. A Case Study: Kieu Ky Landfill - Hanoi, Vietnam -- Status of Waste Management in Sodepur Area: A Case Study. |
Record Nr. | UNINA-9910366654503321 |
Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|