Case studies in building rehabilitation / / João M. P. Q. Delgado |
Autore | Delgado João M. P. Q |
Edizione | [1st edition 2021.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2021 |
Descrizione fisica | 1 online resource (VII, 159 p. 156 illus., 121 illus. in color.) |
Disciplina | 301.5 |
Collana | Building Pathology and Rehabilitation |
Soggetto topico |
Building materials
Building Structural materials Building Materials Building Construction and Design Structural Materials |
ISBN | 3-030-49202-8 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Rehabilitation of K. G. Road, Complex at New Delhi, India -- Characterization of Ancient Mixed Masonry Structures of Brickwork Infilled by Cobblestone Wall -- Rehabilitation of Historic Chancery Building, Yangon, Myanmar -- Rehabilitation Operations in Residential Buildings in La Mina Neighborhood (Barcelona) -- Repair of Face Brick Facades Sustained In Rein-Forced Concrete Slabs -- Influence of Environmental Factors on Deterioration of Mural Paintings in Mogao Cave 285, Dunhuang. |
Record Nr. | UNINA-9910484841603321 |
Delgado João M. P. Q
![]() |
||
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2021 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Case Studies of Building Pathology in Cultural Heritage [[electronic resource] /] / edited by João M.P.Q. Delgado |
Edizione | [1st ed. 2016.] |
Pubbl/distr/stampa | Singapore : , : Springer Singapore : , : Imprint : Springer, , 2016 |
Descrizione fisica | 1 online resource (257 p.) |
Disciplina | 620 |
Collana | Building Pathology and Rehabilitation |
Soggetto topico |
Building materials
Structural materials Thermodynamics Heat engineering Heat transfer Mass transfer Cultural heritage Building Materials Structural Materials Engineering Thermodynamics, Heat and Mass Transfer Cultural Heritage |
ISBN | 981-10-0639-3 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Survey and identification of pathological manifestations in Olympic Stadium of Cascavel city -- Pathology Analysis and Intervention at the “Pavilhão Mourisco” Roof Terraces - Rio de Janeiro, Brazil -- Finding faults in residential buildings -- Experience from Using Prefabricated Elements for Adding Insulation and Upgrading of External Façades -- Recovery and enhancement of modern architectures: the case of cinema Ariston in Potenza (Italy) -- Plumbing system´s pathologies based on the record of technical assistance and design procedures -- Cracks of masonry partition walls in multifloor building: case study -- Survey and dynamic behaviour of the Our Lady of Conception Church, Portugal -- Building refurbishment - economical relevance of the several construction elements -- Analysis of the microclimate in a historical building to assess the probability of recurrence of filamentous fungi -- Maintenance as a tool to avoid building pathology. The Oporto building example -- An interoperable ICT tool for asset and maintenance management - Advances in research -- BIM methodology used in the maintenance of buildings. |
Record Nr. | UNINA-9910254232203321 |
Singapore : , : Springer Singapore : , : Imprint : Springer, , 2016 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Challenges in Mechanics of Time Dependent Materials, Fracture, Fatigue, Failure and Damage Evolution, Volume 2 [[electronic resource] ] : Proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics / / edited by Meredith Silberstein, Alireza Amirkhizi, Xia Shuman, Allison Beese, Ryan B. Berke, Garrett Pataky |
Edizione | [1st ed. 2020.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2020 |
Descrizione fisica | 1 online resource (VIII, 170 p. 125 illus., 106 illus. in color.) |
Disciplina | 531 |
Collana | Conference Proceedings of the Society for Experimental Mechanics Series |
Soggetto topico |
Mechanics
Mechanics, Applied Building materials Structural materials Materials science Solid Mechanics Building Materials Structural Materials Characterization and Evaluation of Materials |
ISBN | 3-030-29986-4 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | 1. Dynamic Analysis of Vehicle Performance for Changes to Rear Axle Housing -- 2. A Comparative Study of Crack Branching In Glass Using Photoelasticity, Digital Image Correlation and Digital Gradient Sensing Techniques -- 3. Hand-Transmitted Vibration with Simple Solution Starting by Weed Walker -- 4. Effect of Loading Rate on Fracture Behavior of Carbon Fiber Reinforced Polymer Composites -- 5. Experimental Measurements of Overload and Underloads On Fatigue Crack Growth Using Digital Image Correlation -- 6. Exploring Microstructural Descriptors in Elastomeric Foams Using Digital Image Correlation and Statistical Analysis -- 7. Effect of Crystallization on Mechanical Properties of CFRTP -- 8. Mode I Traction-Separation Relationship of Sylgard 184 - Aluminum Interface Using Rigid Double Cantilever Beam Analysis -- 9. Solid Cylindrical Bar Torsion for Characterizing Shear Plastic Deformation and Failure -- 10. Mixed Mode (Mode I/III) Dynamic Fracture Initiation Toughness of Aluminum Alloy -- 11. Incremental 1D Viscoelastic Model for Residual Stress and Shape Distortion Analysis During Composite Manufacturing Processes -- 12. Investigating How Microstructural Features Influence Stress Intensities in Pitting Corrosion -- 13. Evaluating the Influence of Size Effects on Load-Displacement Behavior and Failure in Threaded Fasteners, Part I: Experimental Testing -- 14. Investigation of Dynamic Fracture Behavior of Additively Manufactured Al-10Si-Mg Using High-Speed Synchrotron X-ray Imaging -- 15. A Simplified Investigation into Fatigue Viability of Additively Manufactured IN-718 -- 16. A Post-mortem Analysis of the Strain-induced Crystallization Effects on Fatigue of Elastomers -- 17. Analysis of Crack Growth in Compressor Blade Root Subjected to Fatigue -- 18. An Automated Technique to Analyze Micro Indentation Load - Displacement Curve -- 19. Mechanics and Mechanisms of Slow Crack Propagation in Brittle Hydrogels -- 20. Viscoelastoplastic Damage with Maximum Rate of Dissipation-Based Growth Criterion and Tri-Component Lie Rate Decomposition -- 21. Validation of Free-Free Vibration Test Method for Fatigue and Damping Characterization of Thin Structures -- 22. Improved High-Throughput Measurement of High Cycle Fatigue Examination -- 23. Application of Linear Viscoelastic Continuum Damage Theory to the low and high Strain rate Response of Thermoplastic Polyurethane -- 24. Shear Property Characterization of Hydrogels -- 25. High Temperature Low-Cycle Fatigue and Creep-Fatigue Behavior of Fe-25Ni-20Cr Austenitic Stainless Steel -- 26. Thermo-Mechanical Characterization of Polyurea Hybrid Blend Variants -- 27. Milled Carbon Fiber Polyurea Elastomeric Composites. |
Record Nr. | UNINA-9910366614903321 |
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2020 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Challenges in Mechanics of Time Dependent Materials, Volume 2 [[electronic resource] ] : Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics / / edited by Bonnie Antoun, Alex Arzoumanidis, H. Jerry Qi, Meredith Silberstein, Alireza Amirkhizi, Jevan Furmanski, Hongbing Lu |
Edizione | [1st ed. 2017.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2017 |
Descrizione fisica | 1 online resource (VIII, 217 p. 191 illus., 154 illus. in color.) |
Disciplina | 620.1 |
Collana | Conference Proceedings of the Society for Experimental Mechanics Series |
Soggetto topico |
Mechanics
Mechanics, Applied Building materials Materials science Structural materials Solid Mechanics Building Materials Characterization and Evaluation of Materials Structural Materials |
ISBN | 3-319-41543-3 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | 1 Cracking and Durability of Composites in a Marine Environment -- 2 Analyses of Nanoscale to Microscale Strength and Crack-tip Stresses Using Nanomechanical Raman Spectroscopy in In 617 -- 3 High Creep Resistance of Titanium Aluminides Sintered by SPS -- 4 An Investigation of the Temperature and Strain-Rate Effects on Strain-to-Failure of UHMWPE Fibers -- 5 Keynote Life Prediction of CFRP Laminates based on Accelerated Testing Methodology -- 6 Rate Dependent Interfacial Properties Using the JKR Experimental Technique -- 7 Bio-based Composites as Thermorheologically Complex Materials -- 8 Viscoelastic Properties of Longitudinal Waves in a Hollow Cylinder -- 9 Evaluation of Viscoelastic Characteristics Under High Strain Rate by Impact Test -- 10 Phase Changes in Embedded HMX in Response to Periodic Mechanical Excitation -- 11 Effect of Crystal Density on Dynamic Deformation Behavior of PBX -- 12 Strain Rate Dependent Failure of Interfaces Examined via Nanoimpact Experiments -- 13 A Theory of Coupled Anisothermal Chemomechanical Degradation for Finitely-deforming Composite Materials with Eshelbian Interactive Forces -- 14 Effect Of Temperature And Moisture on the Mechanical Properties of Fiber Reinforced Nylon 6 Composites -- 15 Using Hydrostatic Pressure to Maximize Frequency Dependent Damping Properties of Thermoplastic Polyurethane -- 16 Impact Of Hydro-Mechanical Loadings On Rupture Process In Wood Material -- 17 2D Transient Viscoplastic Model for Dislocation Generation of SiC by PVT Method -- 18 Temperature-Dependent Small Strain Plasticity Behavior of 304L Stainless Steel -- 19 Time and Temperature Creep Behaviour Measurement of Al and Al-Mg Alloy Thin Films Using Pressure Bulge Tests -- 20 Multifunctional Wings with Flexible Batteries and Solar Cells for Robotic Birds -- 21 Rate-Dependent Constitutive Model Development of PC/ABS Material -- 22 Comprehensive Viscoelastic Properties Characterization of EMC Using FBG Sensor -- 23 Back Stress in Modeling the Response of PEEK and PC -- 24 Dynamic Testing and Constitutive Modelling of NBR Rubbers -- 25 A New Temperature-dependent Storage Modulus Model of Epoxy Resin -- 26 Identification of Plastic Behaviour of Sheet Metals in High Strain Rate Tests -- 27 Characterization of Fiber Composites at Lower Strain Rates. |
Record Nr. | UNINA-9910254164403321 |
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2017 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Characterization of Minerals, Metals, and Materials 2017 [[electronic resource] /] / edited by Shadia Ikhmayies, Bowen Li, John S. Carpenter, JIan Li, Jiann-Yang Hwang, Sergio Neves Monteiro, Donato Firrao, Mingming Zhang, Zhiwei Peng, Juan P. Escobedo-Diaz, Chenguang Bai, Yunus Eren Kalay, Ramasis Goswami, Jeongguk Kim |
Edizione | [1st ed. 2017.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2017 |
Descrizione fisica | 1 online resource (XXIX, 872 p. 480 illus.) |
Disciplina | 620.11 |
Collana | The Minerals, Metals & Materials Series |
Soggetto topico |
Materials science
Structural materials Engineering—Materials Characterization and Evaluation of Materials Structural Materials Materials Engineering |
ISBN | 3-319-51382-6 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Part 1: Soft Materials -- Charpy Toughness Behavior of Fique Fabric Reinforced Polyester Matrix Composites -- Comparative Analysis of Curaua Fiber Density Using the Geometric Characterization and Pycnometry Technique -- Izod impact tests in polyester matrix composites reinforced with blanket of the malva and jute fibers -- Tensile Behavior of Epoxy Matrix Composites Reinforced With Eucalyptus Fibers -- The dimensional characterization of jute fabric strips for reinforcement in composite polymeric -- Izod Toughness Behavior of Continuous PALF Fibers Reinforced Polyester Matrix Composites -- Mechanical, thermal, morphology and barrier properties of flexible film based on polyethylene-ethylene vinyl alcohol blend reinforced with graphene oxide -- Radiation Effects on Crosslinking of Butyl Rubber Compounds -- Part 2: Clays and Ceramics -- Effect of Skin-Core Hierarchical Structure on Dielectric Constant of Injection Molded and Cast Film Extruded Liquid Crystalline Polymer -- Aging behaviour in Ni0.5CoxMn2.5-xO4 (x=0.5, 0.8 and 1.1) thermistors -- Adsorption of lead from aqueous solutions to bentonite and composite -- Part 3: Electronic, Magnetic, Environmental, and Advanced Materials -- Characterization Of Low-Zinc Electric Arc Furnace Dust -- GAMMA-RADIATION EFFECT ON BIODEGRADABILITY OF SYNTHETIC PLA STRUCTURAL FOAMS PP/HMSPP BASED -- STUDY OF FLEXIBLE FILMS PREPARED FROM PLA/PBAT BLEND AND PLA e-BEAM IRRADIATED AS COMPATIBILIZING AGENT -- Synthesis of ZnO Micro Prisms on Glass Substrates by the Spray Pyrolysis Method -- Part 4: Nano Materials -- Electrical and microstructural investigation of Ni0.5Co0.5Cu0.3Zn0.3Mn1.4O4 temperature sensors -- Enhanced physical properties of thin film nanocomposites -- A study on the size and type of inclusions in Si-Mn combined deoxidated low carbon steel strip -- Effect of Argon Gas Purging of Spark Plasma Sintered ZrB2+SiC Nano-powder Composites -- Part 5: Alloys -- Investigating the Anisotropic Behaviour of Lean Duplex Stainless Steel 2101 -- MICROSTRUCTUAL INVESTIGATION AND IMPACT TESTING OF ADDITIVE MANUFACTURED TI-6AL-4V -- Part 6: Powders and Foams -- SYNTHESIS OF TiN NANO-COMPOSITE POWDER BY HIGH-ENERGY BALL MILLING OF TiH2 UNDER NITROGEN ATMOSPHERE -- Application of AFM in Morphology Determination of Powder Material -- Effects of Thermal Processing on Closed-Cell Aluminium Foams -- Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams under Drop Weight Impact -- Deformation Mechanisms of Closed Cell-Aluminium Foams during Drop Weight Impact -- Part 7: Minerals -- INDUSTRIAL USE OF BRAZILIAN BENTONITE MODIFIED BY MILD ACID ATTACK -- Mullitization Characteristics and Sinterability of Kyanite in Ceramic Preparation -- Ore Dressing and Technological characterization of Palygorskite from Piauí/Brazil for applications as adsorbent of heavy metals -- TECHNOLOGICAL CHARACTERIZATION OF WASTE FROM GOLD MINING DAM -- Synthesis and Characterization of Sodalite and Cancrinita from Kaolin -- Part 8: Ferrous Metals -- Effects of Alumina and Magnesia on Microstructure and Mineralogy of Iron Ore Sinter -- Isothermal Reduction Kinetics of CaO·2Fe2O3 by Thermogravimetric Analysis -- Phase Transformation of MnO2 and Fe2O3 Briquettes Roasted Under CO-CO2 Atmospheres -- Contact Angle of Iron Ore Particles with Water: Measurements and Influencing Factors -- Important Factors to Consider in FIB Milling of Crystalline Materials -- Part 9: Material Processing and Corrosion -- Corrosion Behavior of Super-Ferritic Stainless Steels in NaCl media -- Effect of bromide ions on the pitting corrosion of hafnium in anhydrous t-butanol and acetonitrile -- Compression Behavior of Semi-Closed Die Forged AZ80 Extrusion -- Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique -- Part 10: Method Development -- Development of A New Recycling Process of PGM from Metal-supported Catalyst Using Complex Oxide -- Part 11: Composites -- High thermal conducting composites using percolation theory -- SORPTION CHARACTERISTICS OF LOW DENSITY POLYETHYLENE/KOLA NUT COMPOSITE -- Residual Stress Analysis within Steel Encapsulated Metal Matrix Composites Via Neutron Diffraction -- Tensile Behavior of Epoxy Matrix Composites Reinforced With Pure Ramie Fabric -- Hemp Fiber Density Using the Pycnometer Technique -- Preparation and Characterization of Clay Exfoliation and Vegetal fibre on Properties of Recycled Low Density Polyethylene (rLDPE) -- Part 12: Ferrous Metals -- Estimation of Dislocation Density in Metals from Microhardness Test -- Part 13: Welding and Solidification -- Interfacial strength characterization in a high-modulus low-density steel-based Fe-TiB2 composite -- Part 14: Materials Extractions -- Leaching of Copper-Cobalt Tailings from the Democratic Republic of Congo -- OPTIMUM OPERATING CONDITIONS FOR EXTRACTION OF LIGNIN PRECURSORS FROM PALM FRUIT BUNCH -- SELECTION ON THE PROCESS FOR ENRICHING GOLD FROM REFRACTORY GOLD ORES BY SMELTING -- SELECTION ON THE PROCESS FOR REMOVING AND RECOVERING ANTIMONY FROM ANTIMONIAL REFRACTORY GOLD ORES -- Upgrading of Copper and Cobalt from the Democratic Republic of Congo Tailings -- CHARACTERIZATION OF SPENT PRINTED CIRCUIT BOARDS FROM COMPUTERS -- Study of the Effect of the Initial Nucleation Mechanism of Lead Anode Oxidation Film on Internal Stress in Chromic Acid Electrolyte -- Part 15: Poster Session -- Addition of Cellulose Nanofibers in Reactive Powder Concrete -- ADVANCED ION COLUMN SOLUTION FOR LOW ION DAMAGE CHARACTERIZATION AND ULTRA-FINE PROCESS -- Application of Membrane Separation Technology in Wastewater Treatment of Iron and Steel Enterprise -- Brillouin Scattering Study on Elastic Properties of Bulk hcp ZnO Single Crystal -- Characteristics of stamp charging coke and top charging coke -- Characterization and leaching proposal of Ag ( I) from a Zn concentrate -- Characterization and Mechanical Properties of Additively Manufactured Stainless Steel 316L -- CHARACTERIZATION OF MERCURY JAROSITE -- Characterization of steel production dust and their use in structural ceramics -- CHARPY TOUGHNESS BEHAVIOR OF JUTE FABRIC REINFORCED POLYESTER MATRIX COMPOSITES -- Chemical and Mineralogical Characterization of a Mixed Sulphide Ore at Zimapan, Hidalgo -- Contribution to the ß relaxation study of the HDPE, LDPE and LLDPE -- Determination of Ten Impurity Elements in Tin Concentrate and Smelting Products by ICP-AES -- Effects of wet grinding on the structure and granularity of biological origin aragonite and its polymorphic transformation into calcite -- EVALUATION OF BALLISTIC ARMOR BEHAVIOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS -- EVALUATION OF THE POZZOLANIC ACTIVITY OF RESIDUE FROM THE PAPER INDUSTRY -- EVALUATION OF THE PROPERTIES OF THE ADHESIVE MORTAR IN THE FRESH STATE WITH ADDITION OF GLASS WASTE -- Experimental Evaluation of the Influence of Mortar’s Mechanical Properties on The Behavior of Clay Masonry -- Influence of Operation Conditions on Normal Stress and Flow Pattern of Burden Materials in Blast Furnace Based on Discrete Element Method -- Polymer Blend based on recycled polyethylene and ethylene vinyl acetate copolymers reinforced with natural fibers from agricultural wastes -- Preliminary study of the effect of stirring rate, temperature and oxygen pressure on the leach rate of copper powder, generated by grinding of printed circuit boards of computer -- Preparation and Characterization of Polyethylene Nanocomposites with Clay and Silver Nanoparticles -- Production of concrete interlocking blocks with partial replacement of sand in bulk by waste glass machined -- Reactive Powder Concrete Production with the Addition of Granite Processing Waste -- Research on the reason of the different type of chloride forming in the process of blast furnace ironmaking -- Stress and Deformation Analysis of Hot Blast Stove Piping System -- Stress and Deformation Analysis of Top Combustion Hot Blast Stove Shell -- STUDY OF CALCINED MIXTURES FROM INDUSTRIAL RESIDUES FOR PRODUCTION OF AGGLOMERATES -- STUDY OF SYNERGISTIC EFFECT OF LIGHT STABILIZER ADDITIVE, CONVENTIONAL AND NANOPARTICLES, APPLIED TO POLYETHYLENE FILMS SUBMITTED TO ULTRAVIOLET RADIATION -- Study of the effect of surface liquid flow during column flotation of mining tailing of the Dos Carlos dam -- STUDY ON BENDING TEST ON CONCRETE STRUCTURAL USE CRUMB RUBBER AS SUBSTITUTE IN FINE AGGREGATE -- Synthesis and structural characterization of BaTiO3 doped with Gd3+ -- Texture analysis and anisotropic properties of a rolled CuZn36 brass alloy -- The influence of titanium content on the sinter ore phase structure and the crack -- The use of Network Simplex method for planning the incorporation of recycled paper mill sludge in manufacturing of ceramic bodies -- USE OF ALKALINE SOLID WASTES FROM KRAFT PULP AND PAPER MILLS, DREGS AND GRITS IN CEMENT PRODUCTION -- Wood-to-concrete joints using steel connectors: experimental evaluation. |
Record Nr. | UNINA-9910163994103321 |
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2017 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Characterization of Minerals, Metals, and Materials 2018 [[electronic resource] /] / edited by Bowen Li, Jian Li, Shadia Ikhmayies, Mingming Zhang, Yunus Eren Kalay, John S. Carpenter, Jiann-Yang Hwang, Sergio Neves Monteiro, Donato Firrao, Andrew Brown, Chenguang Bai, Zhiwei Peng, Juan P. Escobedo-Diaz, Ramasis Goswami, Jeongguk Kim |
Edizione | [1st ed. 2018.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2018 |
Descrizione fisica | 1 online resource (XXX, 731 p. 400 illus.) |
Disciplina | 620.112 |
Collana | The Minerals, Metals & Materials Series |
Soggetto topico |
Materials science
Structural materials Engineering—Materials Characterization and Evaluation of Materials Structural Materials Materials Engineering |
ISBN | 3-319-72484-3 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Part 1. Characterization Methods -- On FIB Milling Parameters -- Part 2. Characterization of Ceramics -- Preparation and Characteristics of Steel Slag Ceramics from Converter Slag -- In-situ XRD Investigation of Bauxite Dehydroxylation -- The Investigation of Humics as a Binder for LiFePO4 Cathode Using in Lithium Ion Battery -- Evaluation of Brazilian Bentonite Modified by Acid Attack in Biofuel Production -- Part 3. Characterization of Non-ferrous Metals -- Synthesis and Characterization on Nickel Orthosilicate Anode of Lithium-ion Battery -- Eletrochemical Behavior and Corrosion Properties of Ti-6Al-4V Alloy Made by Selective Laser Melting for Immersion in Artificial Seawater at Different Temperature -- Part 4. Microstructure and Performance of Materials -- Correlation of Microstructure to Dynamic Properties in Two Grades of Alumina -- Part 5. Characterization and Uses of Metallurgical Slags -- Preparation and Characterization of NaNO3/BFS Composite Phase Change Materials -- Characteristics of WISCO Steelmaking Slags -- Effects of Civil Construction Waste on Properties of Lining Mortars -- Pilot Trial of Direct Modification of Molten Blast Furnace Slag and Production of High Acidity Coefficient Slag Wool Fibers -- Reduction Behavior of Ternary Calcium Ferrites for CaO-Fe2O3-MgO System -- Propagation of Power Ultrasound in Calcium Ferrite Melt -- Part 6. Characterization of Polymer and Composite Materials -- Dynamic-mechanical Analysis of Epoxy Composites Reinforced with PALF Fibers -- Characterization of PCBs from Obsolete Computers Aiming the Recovery of Precious Metals -- IZOD Impact Test Comparative Analyzis of Epoxy and Polyester Matrix Composites Reinforced with Hemp Fibers -- Effect of Neomycin in PVP Hydrogel as Wound Dressing -- Comparative Mechanical Analysis of Epoxy Composite Reinforced with Malva/Jute Hybrid Fabric by Izod and Charpy Impact Test -- Comparison Between Epoxy Matrix Composites Reinforced with Ramie Fabric under Pressure and Vacuum -- Charpy Impact Test in Polyester Matrix Composites Reinforced With Hybrid Blanket of the Jute and Malva Fibers -- Part 7. Analysis of Surfaces and Interfaces -- Applications of Aberration-corrected Low-energy Electron Microscopy for Metal Surfaces -- ZnO Thin Films of Flowered-Fibrous Micro/Nanowebs on Glass Substrates Using the Spray Pyrolysis Method -- Intergranular Cracking of High Strength Alloyed Brass Rods -- Part 8. Mechanical Behaviors of Materials -- Determination of Microstructure-based Constitutive Models Using Temperature Rise Distribution in Plane Strain Machining -- Precipitating Behaviour of Second Phase Particles in Lightweight Fe-Mn-Al-C-N Stainless Steel -- Local Texture Evolution and Mechanical Performance of Ultra-High-Speed Friction Stir Weld of AA 6111-T4 sheets -- Part 9. Characterization of Powder Materials -- Characterization of HPGR Pre-treated Sinter Feed -- Thermogravimetric Analysis on Reduction Behavior of Powdery Dicalcium Ferrite -- Study on Application of Iron Ore Fine in Pelletizing -- Characterization of Different Clays for the Optimization of Mixtures for the Production of Ceramic Artifacts -- Part 10. Mineral Processing and Analysis -- Structural, Spectroscopic, Magnetic, and Thermal Characterizations of a Magnetite Ore from the Nagaland Region, India -- Humic Acid-based Silica Composite Aerogels--A Preliminary Study -- Characterization of Non-covalently Functionalized Halloysite -- Synchrotron-based XRD and XANES Study of Bornite Leached by Mesophilic Mixed Bacteria -- Adsorption and Surface Area of Bentonite Modified Used as Bleaching Clay -- Investigation for Removal of Organic Carbon from Carbonaceous Copper Sulphide Ore and Improving the Recovery of Copper through Flotation -- Part 11. Nanostructure and Characterization of Materials -- Microwave Synthesis of Co-Ni Ferrite/Graphene Nanocomposite for Microwave Absorption -- Evaluation of Urea Encapsulation by Microcapsules of PHB/MMT and PHB/OMMT Nanocomposites -- Part 12. Thermal Processing and Analysis -- Buildup Formation Mechanism of Carbon Sleeve in Continuous Annealing Furnace for Silicon Steel -- Pulse Parameter Characterization in Microdrilling of Maraging Steel 300 Alloy -- Characterization of Coke-making Coals of High Reactivity from Northwest China -- The Anodic Behavior of Electro-Deoxidation of Titanium Dioxide in Calcium Chloride Molten Salt -- Part 13. Poster Session -- Addition of Dregs in Mixed Mortar: Evaluation of Physical and Mechanical Properties -- Adhesion Study at Advanced Ages in Multipurpose Mortars -- Applications and Opportunities of Nanomaterials in Construction and Infrastructure -- Automated Optical Serial Sectioning Analysis of Phases in a Medium Carbon Steel -- Characterization of a Brazilian Bentonite for its Use in the Oil and Gas Industry -- Characterization of Tensile Properties of Epoxy Matrix Composites Reinforced with Fique Fabric Fiber -- Clay Smectite Synthetic: Characterization and Application in Nanocomposites -- Comparison of Performance between Granite Waste Pigments Based Paints and Soils Pigments Based Paints -- Development and Characterization of Recycled-HDPE/EVA Foam Reinforced with Babassu Coconut Epicarp Fiber Residues -- Evaluation of Microcapsules of PBSL/MMT-K and PBSL/OMMT-K Nanocomposites -- Evaluation of the Quality of Concrete with Waste of Construction and Demolition -- Evaluation of Two Different Pulsed Plasma Nitriding Conditions on Steel Properties -- Flexural Mechanical Characterization of Polyester Composites Reinforced with Jute Fabric -- Influence of Coupling Agent on the Modification Effects of Vanadium Tailing as a Polymer Filler -- Influence of Electron-beam Irradiation on the Properties of LDPE/EDPM Blend Foams -- Influence of the Areal Density of Layers in the Ballistic Response of a Multilayered Armor System Using Box-behnken Statistical Design -- Influence of the Blocks and Mortar’s Compressive Strength on the Flexural Bond Strength of Concrete Masonry -- Influence of Two Solubilization Conditions at 718 Superalloy Hardness and Microstructure -- Irradiation Influence on the Properties of HMS-Polypropylene Clay/AgNPs Nanocomposites -- Limit Speed Analysis and Absorbed Energy in Multilayer Armor with Epoxy Composite Reinforced with Mallow Fibers and Mallow and Jute Hybrid Fabric -- Mechanical, Thermal and Electrical Properties of Polymer (Ethylene Terephthalate - PET) Filled with Carbon Black -- Mineralogical Analysis of A Chrome Ore from South Africa -- Pilot Trial of Detoxification of Chromium Slag in Cyclone Furnace and Preparation of Glass-ceramics with the water-quenched melt -- Preparation of Refractory Material from Ferronickel Slag -- Process Improvement Study on the Gradation Uniformity of Steel Slag Asphalt Concrete Aggregate -- Research on the Interaction of Humic Acid with Iron Minerals -- Study of Different Process Additives Applied to Polypropylene -- Study of the Durability of Mortars with Effluent Sludge from Paper Industry Exposed to Salt Spray -- Study of the Incorporation of Residue of Ornamental Rocks in Ceramic Tiles -- Study of the Incorporation of Smectite in Powder Coating -- Study of the Mineralogical Composition of the Tailings of Coscotitlán, Hidalgo, Mexico -- The Influence of Clay Reinforcement on the Properties of Recycled Polymer Foams -- The Quality of Tiles in Red Ceramic in Northwest of Rio de Janeiro and Southeast of Minas Gerais. |
Record Nr. | UNINA-9910298601703321 |
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2018 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Characterization of Minerals, Metals, and Materials 2019 [[electronic resource] /] / edited by Bowen Li, Jian Li, Shadia Ikhmayies, Mingming Zhang, Yunus Eren Kalay, John S. Carpenter, Jiann-Yang Hwang, Sergio Neves Monteiro, Chenguang Bai, Juan P. Escobedo-Diaz, Pasquale Russo Spena, Ramasis Goswami |
Edizione | [1st ed. 2019.] |
Pubbl/distr/stampa | Cham : , : Springer International Publishing : , : Imprint : Springer, , 2019 |
Descrizione fisica | 1 online resource (XXVI, 804 p. 451 illus., 324 illus. in color.) |
Disciplina | 620.11 |
Collana | The Minerals, Metals & Materials Series |
Soggetto topico |
Materials science
Structural materials Engineering—Materials Characterization and Evaluation of Materials Structural Materials Materials Engineering |
ISBN | 3-030-05749-6 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Part 1. Characterization Methods -- On FIB Milling Parameters -- Part 2. Characterization of Ceramics -- Preparation and Characteristics of Steel Slag Ceramics from Converter Slag -- In-situ XRD Investigation of Bauxite Dehydroxylation -- The Investigation of Humics as a Binder for LiFePO4 Cathode Using in Lithium Ion Battery -- Evaluation of Brazilian Bentonite Modified by Acid Attack in Biofuel Production -- Part 3. Characterization of Non-ferrous Metals -- Synthesis and Characterization on Nickel Orthosilicate Anode of Lithium-ion Battery -- Eletrochemical Behavior and Corrosion Properties of Ti-6Al-4V Alloy Made by Selective Laser Melting for Immersion in Artificial Seawater at Different Temperature -- Part 4. Microstructure and Performance of Materials -- Correlation of Microstructure to Dynamic Properties in Two Grades of Alumina -- Part 5. Characterization and Uses of Metallurgical Slags -- Preparation and Characterization of NaNO3/BFS Composite Phase Change Materials -- Characteristics of WISCO Steelmaking Slags -- Effects of Civil Construction Waste on Properties of Lining Mortars -- Pilot Trial of Direct Modification of Molten Blast Furnace Slag and Production of High Acidity Coefficient Slag Wool Fibers -- Reduction Behavior of Ternary Calcium Ferrites for CaO-Fe2O3-MgO System -- Propagation of Power Ultrasound in Calcium Ferrite Melt -- Part 6. Characterization of Polymer and Composite Materials -- Dynamic-mechanical Analysis of Epoxy Composites Reinforced with PALF Fibers -- Characterization of PCBs from Obsolete Computers Aiming the Recovery of Precious Metals -- IZOD Impact Test Comparative Analyzis of Epoxy and Polyester Matrix Composites Reinforced with Hemp Fibers -- Effect of Neomycin in PVP Hydrogel as Wound Dressing -- Comparative Mechanical Analysis of Epoxy Composite Reinforced with Malva/Jute Hybrid Fabric by Izod and Charpy Impact Test -- Comparison Between Epoxy Matrix Composites Reinforced with Ramie Fabric under Pressure and Vacuum -- Charpy Impact Test in Polyester Matrix Composites Reinforced With Hybrid Blanket of the Jute and Malva Fibers -- Part 7. Analysis of Surfaces and Interfaces -- Applications of Aberration-corrected Low-energy Electron Microscopy for Metal Surfaces -- ZnO Thin Films of Flowered-Fibrous Micro/Nanowebs on Glass Substrates Using the Spray Pyrolysis Method -- Intergranular Cracking of High Strength Alloyed Brass Rods -- Part 8. Mechanical Behaviors of Materials -- Determination of Microstructure-based Constitutive Models Using Temperature Rise Distribution in Plane Strain Machining -- Precipitating Behaviour of Second Phase Particles in Lightweight Fe-Mn-Al-C-N Stainless Steel -- Local Texture Evolution and Mechanical Performance of Ultra-High-Speed Friction Stir Weld of AA 6111-T4 sheets -- Part 9. Characterization of Powder Materials -- Characterization of HPGR Pre-treated Sinter Feed -- Thermogravimetric Analysis on Reduction Behavior of Powdery Dicalcium Ferrite -- Study on Application of Iron Ore Fine in Pelletizing -- Characterization of Different Clays for the Optimization of Mixtures for the Production of Ceramic Artifacts -- Part 10. Mineral Processing and Analysis -- Structural, Spectroscopic, Magnetic, and Thermal Characterizations of a Magnetite Ore from the Nagaland Region, India -- Humic Acid-based Silica Composite Aerogels--A Preliminary Study -- Characterization of Non-covalently Functionalized Halloysite -- Synchrotron-based XRD and XANES Study of Bornite Leached by Mesophilic Mixed Bacteria -- Adsorption and Surface Area of Bentonite Modified Used as Bleaching Clay -- Investigation for Removal of Organic Carbon from Carbonaceous Copper Sulphide Ore and Improving the Recovery of Copper through Flotation -- Part 11. Nanostructure and Characterization of Materials -- Microwave Synthesis of Co-Ni Ferrite/Graphene Nanocomposite for Microwave Absorption -- Evaluation of Urea Encapsulation by Microcapsules of PHB/MMT and PHB/OMMT Nanocomposites -- Part 12. Thermal Processing and Analysis -- Buildup Formation Mechanism of Carbon Sleeve in Continuous Annealing Furnace for Silicon Steel -- Pulse Parameter Characterization in Microdrilling of Maraging Steel 300 Alloy -- Characterization of Coke-making Coals of High Reactivity from Northwest China -- The Anodic Behavior of Electro-Deoxidation of Titanium Dioxide in Calcium Chloride Molten Salt -- Part 13. Poster Session -- Addition of Dregs in Mixed Mortar: Evaluation of Physical and Mechanical Properties -- Adhesion Study at Advanced Ages in Multipurpose Mortars -- Applications and Opportunities of Nanomaterials in Construction and Infrastructure -- Automated Optical Serial Sectioning Analysis of Phases in a Medium Carbon Steel -- Characterization of a Brazilian Bentonite for its Use in the Oil and Gas Industry -- Characterization of Tensile Properties of Epoxy Matrix Composites Reinforced with Fique Fabric Fiber -- Clay Smectite Synthetic: Characterization and Application in Nanocomposites -- Comparison of Performance between Granite Waste Pigments Based Paints and Soils Pigments Based Paints -- Development and Characterization of Recycled-HDPE/EVA Foam Reinforced with Babassu Coconut Epicarp Fiber Residues -- Evaluation of Microcapsules of PBSL/MMT-K and PBSL/OMMT-K Nanocomposites -- Evaluation of the Quality of Concrete with Waste of Construction and Demolition -- Evaluation of Two Different Pulsed Plasma Nitriding Conditions on Steel Properties -- Flexural Mechanical Characterization of Polyester Composites Reinforced with Jute Fabric -- Influence of Coupling Agent on the Modification Effects of Vanadium Tailing as a Polymer Filler -- Influence of Electron-beam Irradiation on the Properties of LDPE/EDPM Blend Foams -- Influence of the Areal Density of Layers in the Ballistic Response of a Multilayered Armor System Using Box-behnken Statistical Design -- Influence of the Blocks and Mortar’s Compressive Strength on the Flexural Bond Strength of Concrete Masonry -- Influence of Two Solubilization Conditions at 718 Superalloy Hardness and Microstructure -- Irradiation Influence on the Properties of HMS-Polypropylene Clay/AgNPs Nanocomposites -- Limit Speed Analysis and Absorbed Energy in Multilayer Armor with Epoxy Composite Reinforced with Mallow Fibers and Mallow and Jute Hybrid Fabric -- Mechanical, Thermal and Electrical Properties of Polymer (Ethylene Terephthalate - PET) Filled with Carbon Black -- Mineralogical Analysis of A Chrome Ore from South Africa -- Pilot Trial of Detoxification of Chromium Slag in Cyclone Furnace and Preparation of Glass-ceramics with the water-quenched melt -- Preparation of Refractory Material from Ferronickel Slag -- Process Improvement Study on the Gradation Uniformity of Steel Slag Asphalt Concrete Aggregate -- Research on the Interaction of Humic Acid with Iron Minerals -- Study of Different Process Additives Applied to Polypropylene -- Study of the Durability of Mortars with Effluent Sludge from Paper Industry Exposed to Salt Spray -- Study of the Incorporation of Residue of Ornamental Rocks in Ceramic Tiles -- Study of the Incorporation of Smectite in Powder Coating -- Study of the Mineralogical Composition of the Tailings of Coscotitlán, Hidalgo, Mexico -- The Influence of Clay Reinforcement on the Properties of Recycled Polymer Foams -- The Quality of Tiles in Red Ceramic in Northwest of Rio de Janeiro and Southeast of Minas Gerais. |
Record Nr. | UNINA-9910337930703321 |
Cham : , : Springer International Publishing : , : Imprint : Springer, , 2019 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Chemical Thermodynamics in Materials Science [[electronic resource] ] : From Basics to Practical Applications / / by Taishi Matsushita, Kusuhiro Mukai |
Autore | Matsushita Taishi |
Edizione | [1st ed. 2018.] |
Pubbl/distr/stampa | Singapore : , : Springer Singapore : , : Imprint : Springer, , 2018 |
Descrizione fisica | 1 online resource (XI, 263 p. 64 illus., 14 illus. in color.) |
Disciplina | 620.11 |
Soggetto topico |
Metals
Physical chemistry Thermodynamics Heat engineering Heat transfer Mass transfer Structural materials Metallic Materials Physical Chemistry Engineering Thermodynamics, Heat and Mass Transfer Structural Materials |
ISBN |
978-981-13-0405-7
981-13-0405-X |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Introduction -- Symbols and glossary -- The first law of thermodynamics -- Enthalpy, H -- The second law of thermodynamics -- Entropy, S -- Equilibrium conditions -- Chemical potential and activity -- Partial molar quantities and excess quantities -- Gibbs energy change,∆G,and standard Gibbs energy change,∆G○ -- Introduction to computational thermodynamics -- Books, databases, and software -- Thermodynamic data. |
Record Nr. | UNINA-9910298597603321 |
Matsushita Taishi
![]() |
||
Singapore : , : Springer Singapore : , : Imprint : Springer, , 2018 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Chloride-Induced Steel Corrosion in Concrete Under Service Loads [[electronic resource] /] / by Hailong Ye, Chuanqing Fu, Ye Tian, Nanguo Jin |
Autore | Ye Hailong |
Edizione | [1st ed. 2020.] |
Pubbl/distr/stampa | Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 |
Descrizione fisica | 1 online resource (XXIV, 138 p. 166 illus., 129 illus. in color.) |
Disciplina | 620.13623 |
Soggetto topico |
Building materials
Structural materials Tribology Corrosion and anti-corrosives Coatings Fire prevention Buildings—Design and construction Building Construction Engineering, Architectural Building Materials Structural Materials Tribology, Corrosion and Coatings Fire Science, Hazard Control, Building Safety Building Construction and Design |
ISBN | 981-15-4108-6 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Chapter 1. Introduction -- Chapter 2. Chloride ingress in stressed concrete -- Chapter 3. Chloride ingress in cracked concrete -- Chapter 4. Influence of environmental conditions on chloride ingress -- Chapter 5. Steel corrosion in concrete beams under service loads. |
Record Nr. | UNINA-9910383832903321 |
Ye Hailong
![]() |
||
Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
CIGOS 2019, Innovation for Sustainable Infrastructure [[electronic resource] ] : Proceedings of the 5th International Conference on Geotechnics, Civil Engineering Works and Structures / / edited by Cuong Ha-Minh, Dong Van Dao, Farid Benboudjema, Sybil Derrible, Dat Vu Khoa Huynh, Anh Minh Tang |
Edizione | [1st ed. 2020.] |
Pubbl/distr/stampa | Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 |
Descrizione fisica | 1 online resource (xli, 1,264 pages) : illustrations |
Disciplina | 624.151 |
Collana | Lecture Notes in Civil Engineering |
Soggetto topico |
Engineering geology
Engineering—Geology Foundations Hydraulics Sustainable development Regional planning Urban planning Structural materials Buildings—Design and construction Building Construction Engineering, Architectural Transportation engineering Traffic engineering Geoengineering, Foundations, Hydraulics Sustainable Development Landscape/Regional and Urban Planning Structural Materials Building Construction and Design Transportation Technology and Traffic Engineering |
ISBN | 981-15-0802-X |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Four Decades of Computing in Civil Engineering -- Industrialized construction of medium span concrete bridges using movable false work -- Using Simulation to Estimate and Forecast Transportation Metrics: Lessons Learned -- eHighway - An Infrastructure for Sustainable Road Freight Transport -- Innovation Reduces Risk for Sustainable Infrastructure -- Applying a national BIM model to Vietnam's National Implementation of BIM: Lessons learned from the UK-Vietnam collaboration for the Industry. |
Record Nr. | UNINA-9910366587203321 |
Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|