Moisture transport in polymer composite materials : computational modelling and experiments / / J. M. P. Q. Delgado, A. G. Barbosa de Lima |
Autore | Delgado João M. P. Q. |
Pubbl/distr/stampa | Cham, Switzerland : , : Springer, , [2022] |
Descrizione fisica | 1 online resource (109 pages) |
Disciplina | 620.192 |
Collana | Advanced Structured Materials |
Soggetto topico |
Composite materials - Testing
Polymers - Testing |
ISBN | 3-030-77826-6 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Intro -- Preface -- Acknowledgements -- Contents -- 1 Introduction -- 1.1 Motivation -- 1.2 Composite Materials: Fundamentals -- References -- 2 Fundamentals -- 2.1 Natural Fiber-Reinforced Polymer Composites -- 2.2 Water Absorption in Natural Fiber-Reinforced Polymer Composites -- References -- 3 Experimental Analysis -- 3.1 Background -- 3.2 Experimental Setup -- 3.3 Experimental Results Analysis -- 3.3.1 Morphology Characterization of the Fibers -- 3.3.2 Water Absorption Kinetics -- 3.3.3 Mechanical Properties -- References -- 4 Fick's Model Analysis -- 4.1 Transport Phenomena in Porous Media: Foundations -- 4.2 Moisture Absorption by Fick's Model -- 4.2.1 The Physical Problem -- 4.2.2 The General Mass Diffusion Equation -- 4.2.3 The Mass Diffusion Equation: 3D Approach in Cartesian Coordinates -- 4.2.4 Solution Techniques: Three-Dimensional Approach -- 4.2.5 Fick's Model Application -- References -- 5 Langmuir-Type Model Analysis -- 5.1 Fundamentals -- 5.2 Moisture Absorption by Langmuir-Type Model -- 5.2.1 The Physical Problem -- 5.2.2 The General Mass Diffusion Equation -- 5.2.3 The Mass Diffusion Equation: 3D Approach in Cartesian Coordinates -- 5.2.4 The Water Absorption Process: 1D Approach in Cartesian Coordinates -- 5.2.5 The Water Absorption Process: 3D Approach -- References -- 6 Conclusions. |
Record Nr. | UNINA-9910553070103321 |
Delgado João M. P. Q. | ||
Cham, Switzerland : , : Springer, , [2022] | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Plastics additives and testing [[electronic resource] /] / Muralisrinivasan Natamai Subramanian |
Autore | Muralisrinivasan Natamai Subramanian |
Pubbl/distr/stampa | Hoboken, New Jersey, : John Wiley & Sons, Inc., 2013 |
Descrizione fisica | 1 online resource (235 p.) |
Disciplina | 668.411 |
Collana | Polymer Science and Plastics Engineering |
Soggetto topico |
Polymers - Additives
Polymers - Testing Polymers - Analysis |
ISBN |
1-118-71055-X
1-118-71012-6 1-299-47594-9 1-118-71059-2 |
Classificazione | TEC009010 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Cover; Title Page; Copyright Page; Contents; Preface; 1 Introduction; 1.1 Summary; References; 2 Thermoplastics and Thermosets; 2.1 Benefits/Advantages of Plastics; 2.2 Classification; 2.3 Thermoplastics; 2.3.1 Polyolefins; 2.3.2 Polystyrene; 2.3.3 Polyvinylchloride (PVC); 2.3.4 Acrylonitrile-Butadiene-Styrene (ABS); 2.3.5 Poly(methyl methacrylate) (PMMA); 2.3.6 Polyesters; 2.3.7 Nylons; 2.3.8 Polycarbonate; 2.3.9 Polyoxymethylene (POM); 2.3.10 Biodegradable Plastics; 2.4 Thermosets; 2.4.1 Phenol-formaldehyde; 2.4.2 Melamine-formaldehyde (MF); 2.4.3 Epoxies; References; 3 Types of Additives
3.1 Selection of Additives3.2 Surface Property Modifiers; 3.2.1 Antiblocking Agents; 3.2.2 Antifogging Agents; 3.2.3 Antistatic Agents; 3.2.4 Coupling Agents; 3.2.5 Release Agents; 3.3 Chemical Property Modifiers; 3.3.1 Antioxidants; 3.3.2 Biocides; 3.3.3 Flame Retardants; 3.3.4 UV Stabilizers; 3.4 Processing Modifiers; 3.4.1 Blowing Agents; 3.4.2 Crosslinking Agents; 3.4.3 Heat Stabilizers; 3.4.4 Plasticizers; 3.4.5 Processing Aids; 3.4.6 Lubricants; 3.5 Mechanical Property Modifiers; 3.5.1 Fillers; 3.5.2 Impact Modifiers; 3.5.3 Nucleating Agents; 3.5.4 Reinforcing Fibers 3.6 Aesthetic Property Modifiers3.6.1 Coloring Agents; 3.6.2 Odorants; 3.7 Other Additives; 3.7.1 Curing Agents; 3.7.2 Clarifying Agents; 3.7.3 Chain Extenders; 3.7.4 Accelerators; 3.7.5 Slip Additive or Antislip Agents; 3.7.6 Anti-Plate-Out Additives; 3.7.7 Antiplasticizers; 3.8 Additives from Natural Sources; References; 4 Plastics Additive and Chemistry; 4.1 Properties of Plastics; 4.2 Chemistry of Additives; 4.3 Chemical Properties of Additives; 4.3.1 Antioxidants; 4.3.2 Stabilizers; 4.3.3 Surface Active Additives; 4.3.4 Static Charge and Antistatic Additive; 4.3.5 Antifogging Agents 4.3.6 Anti-blocking Agents4.3.7 Nucleating Agents; 4.3.8 Lubricants; 4.3.9 Impact Modifiers; 4.3.10 Processing Aids; 4.3.11 Biocides; 4.3.12 Plasticizers; 4.3.13 Foaming Agents; 4.3.14 Organic Peroxides; 4.3.15 Flame Retardants; 4.3.16 Fillers; 4.3.17 Colorants; References; 5 Organic Additives; 5.1 Antioxidants; 5.2 Antistatic Agents; 5.3 Antifogging Agents; 5.4 Antiblocking Agents; 5.5 Slip Additives; 5.6 UV Stabilizers; 5.6.1 Radical Scavengers and Quenchers; 5.7 Nucleating Agents; 5.8 Flame Retardants; 5.9 Lubricants; 5.9.1 Metal Soaps; 5.10 Plasticizers; 5.11 Impact Modifiers 5.12 Fillers5.12.1 Starch; 5.12.2 Natural Fibers; 5.12.3 Wood Fibers; 5.13 Organic Colorants; 5.13.1 Phthalocyanine Pigments; 5.13.2 Anthraquinone Pigments; 5.13.3 Azo Pigments; 5.13.4 Other Pigments; 5.14 Foaming Agents; 5.15 Chain Extenders; 5.16 Organic Peroxides; 5.17 Accelerators; 5.18 Activators; References; 6 Inorganic Additives; 6.1 Heat Stabilizers; 6.2 Flame Retardants; 6.3 Fillers; 6.3.1 Calcium Carbonate; 6.3.2 Nanofillers; 6.3.3 Silica; 6.3.4 Mica; 6.3.5 Solid Glass Spheres; 6.3.6 Talc; 6.3.7 Asbestos; 6.3.8 Zinc Oxide; 6.3.9 Barium Sulfate; 6.3.10 Calcined Alumina 6.3.11 Aluminum Trihydrate (ATH) |
Record Nr. | UNINA-9910138861203321 |
Muralisrinivasan Natamai Subramanian | ||
Hoboken, New Jersey, : John Wiley & Sons, Inc., 2013 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Plastics additives and testing [[electronic resource] /] / Muralisrinivasan Natamai Subramanian |
Autore | Muralisrinivasan Natamai Subramanian |
Edizione | [1st ed.] |
Pubbl/distr/stampa | Hoboken, New Jersey, : John Wiley & Sons, Inc., 2013 |
Descrizione fisica | 1 online resource (235 p.) |
Disciplina | 668.411 |
Collana | Polymer Science and Plastics Engineering |
Soggetto topico |
Polymers - Additives
Polymers - Testing Polymers - Analysis |
ISBN |
1-118-71055-X
1-118-71012-6 1-299-47594-9 1-118-71059-2 |
Classificazione | TEC009010 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Cover; Title Page; Copyright Page; Contents; Preface; 1 Introduction; 1.1 Summary; References; 2 Thermoplastics and Thermosets; 2.1 Benefits/Advantages of Plastics; 2.2 Classification; 2.3 Thermoplastics; 2.3.1 Polyolefins; 2.3.2 Polystyrene; 2.3.3 Polyvinylchloride (PVC); 2.3.4 Acrylonitrile-Butadiene-Styrene (ABS); 2.3.5 Poly(methyl methacrylate) (PMMA); 2.3.6 Polyesters; 2.3.7 Nylons; 2.3.8 Polycarbonate; 2.3.9 Polyoxymethylene (POM); 2.3.10 Biodegradable Plastics; 2.4 Thermosets; 2.4.1 Phenol-formaldehyde; 2.4.2 Melamine-formaldehyde (MF); 2.4.3 Epoxies; References; 3 Types of Additives
3.1 Selection of Additives3.2 Surface Property Modifiers; 3.2.1 Antiblocking Agents; 3.2.2 Antifogging Agents; 3.2.3 Antistatic Agents; 3.2.4 Coupling Agents; 3.2.5 Release Agents; 3.3 Chemical Property Modifiers; 3.3.1 Antioxidants; 3.3.2 Biocides; 3.3.3 Flame Retardants; 3.3.4 UV Stabilizers; 3.4 Processing Modifiers; 3.4.1 Blowing Agents; 3.4.2 Crosslinking Agents; 3.4.3 Heat Stabilizers; 3.4.4 Plasticizers; 3.4.5 Processing Aids; 3.4.6 Lubricants; 3.5 Mechanical Property Modifiers; 3.5.1 Fillers; 3.5.2 Impact Modifiers; 3.5.3 Nucleating Agents; 3.5.4 Reinforcing Fibers 3.6 Aesthetic Property Modifiers3.6.1 Coloring Agents; 3.6.2 Odorants; 3.7 Other Additives; 3.7.1 Curing Agents; 3.7.2 Clarifying Agents; 3.7.3 Chain Extenders; 3.7.4 Accelerators; 3.7.5 Slip Additive or Antislip Agents; 3.7.6 Anti-Plate-Out Additives; 3.7.7 Antiplasticizers; 3.8 Additives from Natural Sources; References; 4 Plastics Additive and Chemistry; 4.1 Properties of Plastics; 4.2 Chemistry of Additives; 4.3 Chemical Properties of Additives; 4.3.1 Antioxidants; 4.3.2 Stabilizers; 4.3.3 Surface Active Additives; 4.3.4 Static Charge and Antistatic Additive; 4.3.5 Antifogging Agents 4.3.6 Anti-blocking Agents4.3.7 Nucleating Agents; 4.3.8 Lubricants; 4.3.9 Impact Modifiers; 4.3.10 Processing Aids; 4.3.11 Biocides; 4.3.12 Plasticizers; 4.3.13 Foaming Agents; 4.3.14 Organic Peroxides; 4.3.15 Flame Retardants; 4.3.16 Fillers; 4.3.17 Colorants; References; 5 Organic Additives; 5.1 Antioxidants; 5.2 Antistatic Agents; 5.3 Antifogging Agents; 5.4 Antiblocking Agents; 5.5 Slip Additives; 5.6 UV Stabilizers; 5.6.1 Radical Scavengers and Quenchers; 5.7 Nucleating Agents; 5.8 Flame Retardants; 5.9 Lubricants; 5.9.1 Metal Soaps; 5.10 Plasticizers; 5.11 Impact Modifiers 5.12 Fillers5.12.1 Starch; 5.12.2 Natural Fibers; 5.12.3 Wood Fibers; 5.13 Organic Colorants; 5.13.1 Phthalocyanine Pigments; 5.13.2 Anthraquinone Pigments; 5.13.3 Azo Pigments; 5.13.4 Other Pigments; 5.14 Foaming Agents; 5.15 Chain Extenders; 5.16 Organic Peroxides; 5.17 Accelerators; 5.18 Activators; References; 6 Inorganic Additives; 6.1 Heat Stabilizers; 6.2 Flame Retardants; 6.3 Fillers; 6.3.1 Calcium Carbonate; 6.3.2 Nanofillers; 6.3.3 Silica; 6.3.4 Mica; 6.3.5 Solid Glass Spheres; 6.3.6 Talc; 6.3.7 Asbestos; 6.3.8 Zinc Oxide; 6.3.9 Barium Sulfate; 6.3.10 Calcined Alumina 6.3.11 Aluminum Trihydrate (ATH) |
Record Nr. | UNINA-9910810147903321 |
Muralisrinivasan Natamai Subramanian | ||
Hoboken, New Jersey, : John Wiley & Sons, Inc., 2013 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Polymer composites and polymer testing : selected, peer reviewed papers from the 2012 International Symposium on Polymer Composites and Polymer Testing (ISPCPT 2012), March 23-25, 2012, Hangzhou, Zhejiang, China / / edited by Hongkui Mao [and four others] |
Pubbl/distr/stampa | Durnten-Zurich, Switzerland : , : Trans Tech Publications Ltd, , [2012] |
Descrizione fisica | 1 online resource (510 p.) |
Disciplina | 620.192 |
Altri autori (Persone) | MaoHongkui |
Collana | Advanced materials research |
Soggetto topico |
Polymeric composites
Polymers - Testing |
Soggetto genere / forma | Electronic books. |
ISBN |
1-62870-902-2
3-03813-815-0 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Polymer Composites and Polymer Testing; Preface and Committee; Table of Contents; Chapter 1: Polymer Composites and Applied Materials; A Magnetic Array Fabricated by a Novel Process Constructed with Photosensitive Polyimide-Ferrite Nanocomposite; Effect of Liquid Structural Transition on the Morphology of Solid/Liquid Interface during the Unsteady-State Unidirectional Solidification; Effect of Particle Size of Natural Graphite on Methyl Blue Sorption Behavior of Expanded Graphite; Expansion Mechanism of Expandable Graphite Formed by Natural Graphite with Different Particle Size
Finite Element Implementations to Predict the Failure of Composite Laminates Under Uniaxial TensionImproved Physical and Electrochemical Hydrogen Storage Kinetics of the Mg20Ni10-XMx (M=Cu, Co; X=0, 4) Alloys by Melt Spinning; Influence of Bi2O3 on the Structure and Magnetic Properties of Barium Ferrite Powders Materials; Investigation about Synthesis of Carbon Nanotubes with Various Structures Governed by Temperature and Relevant Growth Mechanism; Investigation of Structure and Properties of PET Multifilament Irradiated with UV in Different Atmosphere Microstructure and Mechanical Properties of Mg-6Al-0.3Mn-0.9Y AlloyMicrostructure and Wear Resisting Property of 40Cr Steel Treated by Supersonic Particles Bombarding; Perfluoropolyether Modified Waterborne Shape Memory Polyurethaneurea Ionomers for Potential Medical Implant Application; Photodecomposition of Methylene Blue by the S, Al Doped TiO2 Mesoporous Materials; Preparation Mechanism of Electrostatic Self-Assembled Polyelectrolyte Film Using Quartz Crystal Microbalance; Self-Piercing Riveting Process Simulation of Joining Aluminium Alloy Sheets; Size Effect of Expandable Graphite Size-Dependent Young's Modulus of the FCC Metallic FilmsStructure and Properties of Composite Films of Cellulose and Chitosan from Ionic Liquid; Study of the Preparation and Degradable Characteristics of CaCO3-PE Film; Surface Properties of UHMWPE Fiber after Low Temperature Argon-Plasma Treatment; Synthesis and Characterization of Novel PCA-PEG-PCA Triblock Copolymer; Synthesis and Characterization of Polyesters Containing 5-Fluorouracil in the Main Chain; Synthesis of Poly(Urethane-Urea)s from Polycarbonate Macrodiols and IPDI with the Addition of Derivant of Propylene Carbonate The Effect of Fatty Acid on Phase Behaviors of Tween 80/bmimPF6/toluene MicroemulsionsThe Electrochemical Performance of Carboxymethyl Cellulose with Different DS as a Binding Material in Lithium Batteries; Chapter 2: Applied Mechanics and Manufacturing Technology; Design of Rupture Strength Based on Confidence Level of HK40 Steel; An Approach for Analysis of Bulged Profile and Thickness Distribution of Tube in Free Hydro-Bulging Process; Numerical Investigation of Air Flow Distribution in a Swirling Fluidized Bed; Approach of Selecting Profile Modifications Curves for Spur Gears Preparation and Properties of a Custom-Designed Nickel-Based Amorphous Brazing Foil |
Record Nr. | UNINA-9910465286803321 |
Durnten-Zurich, Switzerland : , : Trans Tech Publications Ltd, , [2012] | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Polymer composites and polymer testing : selected, peer reviewed papers from the 2012 International Symposium on Polymer Composites and Polymer Testing (ISPCPT 2012), March 23-25, 2012, Hangzhou, Zhejiang, China / / edited by Hongkui Mao [and four others] |
Pubbl/distr/stampa | Durnten-Zurich, Switzerland : , : Trans Tech Publications Ltd, , [2012] |
Descrizione fisica | 1 online resource (510 p.) |
Disciplina | 620.192 |
Altri autori (Persone) | MaoHongkui |
Collana | Advanced materials research |
Soggetto topico |
Polymeric composites
Polymers - Testing |
ISBN |
1-62870-902-2
3-03813-815-0 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Polymer Composites and Polymer Testing; Preface and Committee; Table of Contents; Chapter 1: Polymer Composites and Applied Materials; A Magnetic Array Fabricated by a Novel Process Constructed with Photosensitive Polyimide-Ferrite Nanocomposite; Effect of Liquid Structural Transition on the Morphology of Solid/Liquid Interface during the Unsteady-State Unidirectional Solidification; Effect of Particle Size of Natural Graphite on Methyl Blue Sorption Behavior of Expanded Graphite; Expansion Mechanism of Expandable Graphite Formed by Natural Graphite with Different Particle Size
Finite Element Implementations to Predict the Failure of Composite Laminates Under Uniaxial TensionImproved Physical and Electrochemical Hydrogen Storage Kinetics of the Mg20Ni10-XMx (M=Cu, Co; X=0, 4) Alloys by Melt Spinning; Influence of Bi2O3 on the Structure and Magnetic Properties of Barium Ferrite Powders Materials; Investigation about Synthesis of Carbon Nanotubes with Various Structures Governed by Temperature and Relevant Growth Mechanism; Investigation of Structure and Properties of PET Multifilament Irradiated with UV in Different Atmosphere Microstructure and Mechanical Properties of Mg-6Al-0.3Mn-0.9Y AlloyMicrostructure and Wear Resisting Property of 40Cr Steel Treated by Supersonic Particles Bombarding; Perfluoropolyether Modified Waterborne Shape Memory Polyurethaneurea Ionomers for Potential Medical Implant Application; Photodecomposition of Methylene Blue by the S, Al Doped TiO2 Mesoporous Materials; Preparation Mechanism of Electrostatic Self-Assembled Polyelectrolyte Film Using Quartz Crystal Microbalance; Self-Piercing Riveting Process Simulation of Joining Aluminium Alloy Sheets; Size Effect of Expandable Graphite Size-Dependent Young's Modulus of the FCC Metallic FilmsStructure and Properties of Composite Films of Cellulose and Chitosan from Ionic Liquid; Study of the Preparation and Degradable Characteristics of CaCO3-PE Film; Surface Properties of UHMWPE Fiber after Low Temperature Argon-Plasma Treatment; Synthesis and Characterization of Novel PCA-PEG-PCA Triblock Copolymer; Synthesis and Characterization of Polyesters Containing 5-Fluorouracil in the Main Chain; Synthesis of Poly(Urethane-Urea)s from Polycarbonate Macrodiols and IPDI with the Addition of Derivant of Propylene Carbonate The Effect of Fatty Acid on Phase Behaviors of Tween 80/bmimPF6/toluene MicroemulsionsThe Electrochemical Performance of Carboxymethyl Cellulose with Different DS as a Binding Material in Lithium Batteries; Chapter 2: Applied Mechanics and Manufacturing Technology; Design of Rupture Strength Based on Confidence Level of HK40 Steel; An Approach for Analysis of Bulged Profile and Thickness Distribution of Tube in Free Hydro-Bulging Process; Numerical Investigation of Air Flow Distribution in a Swirling Fluidized Bed; Approach of Selecting Profile Modifications Curves for Spur Gears Preparation and Properties of a Custom-Designed Nickel-Based Amorphous Brazing Foil |
Record Nr. | UNINA-9910791907503321 |
Durnten-Zurich, Switzerland : , : Trans Tech Publications Ltd, , [2012] | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Polymer composites and polymer testing : selected, peer reviewed papers from the 2012 International Symposium on Polymer Composites and Polymer Testing (ISPCPT 2012), March 23-25, 2012, Hangzhou, Zhejiang, China / / edited by Hongkui Mao [and four others] |
Pubbl/distr/stampa | Durnten-Zurich, Switzerland : , : Trans Tech Publications Ltd, , [2012] |
Descrizione fisica | 1 online resource (510 p.) |
Disciplina | 620.192 |
Altri autori (Persone) | MaoHongkui |
Collana | Advanced materials research |
Soggetto topico |
Polymeric composites
Polymers - Testing |
ISBN |
1-62870-902-2
3-03813-815-0 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Polymer Composites and Polymer Testing; Preface and Committee; Table of Contents; Chapter 1: Polymer Composites and Applied Materials; A Magnetic Array Fabricated by a Novel Process Constructed with Photosensitive Polyimide-Ferrite Nanocomposite; Effect of Liquid Structural Transition on the Morphology of Solid/Liquid Interface during the Unsteady-State Unidirectional Solidification; Effect of Particle Size of Natural Graphite on Methyl Blue Sorption Behavior of Expanded Graphite; Expansion Mechanism of Expandable Graphite Formed by Natural Graphite with Different Particle Size
Finite Element Implementations to Predict the Failure of Composite Laminates Under Uniaxial TensionImproved Physical and Electrochemical Hydrogen Storage Kinetics of the Mg20Ni10-XMx (M=Cu, Co; X=0, 4) Alloys by Melt Spinning; Influence of Bi2O3 on the Structure and Magnetic Properties of Barium Ferrite Powders Materials; Investigation about Synthesis of Carbon Nanotubes with Various Structures Governed by Temperature and Relevant Growth Mechanism; Investigation of Structure and Properties of PET Multifilament Irradiated with UV in Different Atmosphere Microstructure and Mechanical Properties of Mg-6Al-0.3Mn-0.9Y AlloyMicrostructure and Wear Resisting Property of 40Cr Steel Treated by Supersonic Particles Bombarding; Perfluoropolyether Modified Waterborne Shape Memory Polyurethaneurea Ionomers for Potential Medical Implant Application; Photodecomposition of Methylene Blue by the S, Al Doped TiO2 Mesoporous Materials; Preparation Mechanism of Electrostatic Self-Assembled Polyelectrolyte Film Using Quartz Crystal Microbalance; Self-Piercing Riveting Process Simulation of Joining Aluminium Alloy Sheets; Size Effect of Expandable Graphite Size-Dependent Young's Modulus of the FCC Metallic FilmsStructure and Properties of Composite Films of Cellulose and Chitosan from Ionic Liquid; Study of the Preparation and Degradable Characteristics of CaCO3-PE Film; Surface Properties of UHMWPE Fiber after Low Temperature Argon-Plasma Treatment; Synthesis and Characterization of Novel PCA-PEG-PCA Triblock Copolymer; Synthesis and Characterization of Polyesters Containing 5-Fluorouracil in the Main Chain; Synthesis of Poly(Urethane-Urea)s from Polycarbonate Macrodiols and IPDI with the Addition of Derivant of Propylene Carbonate The Effect of Fatty Acid on Phase Behaviors of Tween 80/bmimPF6/toluene MicroemulsionsThe Electrochemical Performance of Carboxymethyl Cellulose with Different DS as a Binding Material in Lithium Batteries; Chapter 2: Applied Mechanics and Manufacturing Technology; Design of Rupture Strength Based on Confidence Level of HK40 Steel; An Approach for Analysis of Bulged Profile and Thickness Distribution of Tube in Free Hydro-Bulging Process; Numerical Investigation of Air Flow Distribution in a Swirling Fluidized Bed; Approach of Selecting Profile Modifications Curves for Spur Gears Preparation and Properties of a Custom-Designed Nickel-Based Amorphous Brazing Foil |
Record Nr. | UNINA-9910810749003321 |
Durnten-Zurich, Switzerland : , : Trans Tech Publications Ltd, , [2012] | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Polymer hybrid photovoltaics for inexpensive electricity generation [[electronic resource] ] : final technical report, 1 September 2001 - 30 April 2006 / / S.A. Carter, University of California-Santa Cruz |
Autore | Carter Sue A |
Pubbl/distr/stampa | Golden, Colo. : , : National Renewable Energy Laboratory, , [2006] |
Descrizione fisica | iii, 13 pages : digital, PDF file |
Collana | NREL/SR |
Soggetto topico |
Photovoltaic cells - Research
Solar cells - Computer simulation Polymers - Testing |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Altri titoli varianti | Polymer Hybrid Photovoltaics for Inexpensive Electricity Generation |
Record Nr. | UNINA-9910698345703321 |
Carter Sue A | ||
Golden, Colo. : , : National Renewable Energy Laboratory, , [2006] | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Polymer testing : new instrumental methods / / Muralisrinivasan Subramanian |
Autore | Subramanian Muralisrinivasan |
Edizione | [1st ed.] |
Pubbl/distr/stampa | New York : , : Momentum Press, LLC, , [2012] |
Descrizione fisica | 1 online resource (201 p.) |
Disciplina | 547.7046 |
Soggetto topico |
Polymers - Analysis
Polymers - Testing |
Soggetto genere / forma | Electronic books. |
ISBN |
1-283-89594-3
1-60650-244-1 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Preface -- About the author --
1. Introduction -- 1.1 Polymer basics -- 1.2 Morphological aspects -- 1.3 Chemical aspects -- 1.4 Classification of polymers -- 1.5 Polymerization techniques -- 1.6 Polymerization processes -- 1.7 Polymer synthesis -- 1.8 Polymer structure and properties -- 1.9 Requirements for instrumental methods -- References -- 2. Polymer separation techniques -- 2.1 Chromatographic methods -- 2.2 Liquid chromatography -- 2.3 High-performance liquid chromatography -- 2.4 Gel permeation chromatography -- 2.5 Field-flow fractionation -- 2.6 Super-fluid chromatography -- 2.7 Gas chromatography -- 2.8 Future trends -- References -- 3. Spectroscopic techniques -- 3.1 Fourier-transform infrared (FTIR) spectroscopy -- 3.2 Raman spectroscopy -- 3.3 Nuclear magnetic resonance spectroscopy (NMR) -- References -- 4. Thermal analysis and degradation -- 4.1 Thermogravimetric analysis -- 4.2 Differential scanning calorimetry -- 4.3 Differential thermal analysis -- 4.4 Polymer degradation -- References -- 5. Rheology and other instrumental techniques -- 5.1 Rheology -- 5.2 Mass spectrometry -- 5.3 Matrix-assisted laser desorption ionization (MALDI) mass spectrometry -- 5.4 Electron microscopy -- 5.5 Future trends -- References -- 6. Thermoplastics -- 6.1 Polyethylene (PE) -- 6.2 Polypropylene (PP) -- 6.3 Polystyrene (PS) -- 6.4 Polyethylene terephthalate (PET) -- 6.5 Polyvinylchloride (PVC) -- 6.6 Polymethylmethacrylate (PMMA) -- 6.7 Polyvinyl acetate (PVAC) -- 6.8 Nylon -- 6.9 Polycarbonate (PC) -- 6.10 Infrared bands for identification of thermoplastic materials -- 6.11 Future trends -- References -- 7. Thermosets -- 7.1 Phenol formaldehyde -- 7.2 Urea formaldehyde -- 7.3 Melamine formaldehyde -- 7.4 Epoxy thermosets -- 7.5 Future trends -- References -- 8. Polymer blends and composites -- 8.1 Polymer blends -- 8.2 Polymer composites -- 8.3 Future trends -- 8.4 Conclusion -- References -- Index. |
Record Nr. | UNINA-9910462259403321 |
Subramanian Muralisrinivasan | ||
New York : , : Momentum Press, LLC, , [2012] | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Polymer testing : new instrumental methods / / Muralisrinivasan Subramanian |
Autore | Subramanian Muralisrinivasan |
Edizione | [1st ed.] |
Pubbl/distr/stampa | New York : , : Momentum Press, LLC, , [2012] |
Descrizione fisica | 1 online resource (201 p.) |
Disciplina | 547.7046 |
Soggetto topico |
Polymers - Analysis
Polymers - Testing |
ISBN |
1-283-89594-3
1-60650-244-1 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Preface -- About the author --
1. Introduction -- 1.1 Polymer basics -- 1.2 Morphological aspects -- 1.3 Chemical aspects -- 1.4 Classification of polymers -- 1.5 Polymerization techniques -- 1.6 Polymerization processes -- 1.7 Polymer synthesis -- 1.8 Polymer structure and properties -- 1.9 Requirements for instrumental methods -- References -- 2. Polymer separation techniques -- 2.1 Chromatographic methods -- 2.2 Liquid chromatography -- 2.3 High-performance liquid chromatography -- 2.4 Gel permeation chromatography -- 2.5 Field-flow fractionation -- 2.6 Super-fluid chromatography -- 2.7 Gas chromatography -- 2.8 Future trends -- References -- 3. Spectroscopic techniques -- 3.1 Fourier-transform infrared (FTIR) spectroscopy -- 3.2 Raman spectroscopy -- 3.3 Nuclear magnetic resonance spectroscopy (NMR) -- References -- 4. Thermal analysis and degradation -- 4.1 Thermogravimetric analysis -- 4.2 Differential scanning calorimetry -- 4.3 Differential thermal analysis -- 4.4 Polymer degradation -- References -- 5. Rheology and other instrumental techniques -- 5.1 Rheology -- 5.2 Mass spectrometry -- 5.3 Matrix-assisted laser desorption ionization (MALDI) mass spectrometry -- 5.4 Electron microscopy -- 5.5 Future trends -- References -- 6. Thermoplastics -- 6.1 Polyethylene (PE) -- 6.2 Polypropylene (PP) -- 6.3 Polystyrene (PS) -- 6.4 Polyethylene terephthalate (PET) -- 6.5 Polyvinylchloride (PVC) -- 6.6 Polymethylmethacrylate (PMMA) -- 6.7 Polyvinyl acetate (PVAC) -- 6.8 Nylon -- 6.9 Polycarbonate (PC) -- 6.10 Infrared bands for identification of thermoplastic materials -- 6.11 Future trends -- References -- 7. Thermosets -- 7.1 Phenol formaldehyde -- 7.2 Urea formaldehyde -- 7.3 Melamine formaldehyde -- 7.4 Epoxy thermosets -- 7.5 Future trends -- References -- 8. Polymer blends and composites -- 8.1 Polymer blends -- 8.2 Polymer composites -- 8.3 Future trends -- 8.4 Conclusion -- References -- Index. |
Record Nr. | UNINA-9910785548703321 |
Subramanian Muralisrinivasan | ||
New York : , : Momentum Press, LLC, , [2012] | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Polymer testing : new instrumental methods / / Muralisrinivasan Subramanian |
Autore | Subramanian Muralisrinivasan |
Edizione | [1st ed.] |
Pubbl/distr/stampa | New York : , : Momentum Press, LLC, , [2012] |
Descrizione fisica | 1 online resource (201 p.) |
Disciplina | 547.7046 |
Soggetto topico |
Polymers - Analysis
Polymers - Testing |
ISBN |
1-283-89594-3
1-60650-244-1 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Preface -- About the author --
1. Introduction -- 1.1 Polymer basics -- 1.2 Morphological aspects -- 1.3 Chemical aspects -- 1.4 Classification of polymers -- 1.5 Polymerization techniques -- 1.6 Polymerization processes -- 1.7 Polymer synthesis -- 1.8 Polymer structure and properties -- 1.9 Requirements for instrumental methods -- References -- 2. Polymer separation techniques -- 2.1 Chromatographic methods -- 2.2 Liquid chromatography -- 2.3 High-performance liquid chromatography -- 2.4 Gel permeation chromatography -- 2.5 Field-flow fractionation -- 2.6 Super-fluid chromatography -- 2.7 Gas chromatography -- 2.8 Future trends -- References -- 3. Spectroscopic techniques -- 3.1 Fourier-transform infrared (FTIR) spectroscopy -- 3.2 Raman spectroscopy -- 3.3 Nuclear magnetic resonance spectroscopy (NMR) -- References -- 4. Thermal analysis and degradation -- 4.1 Thermogravimetric analysis -- 4.2 Differential scanning calorimetry -- 4.3 Differential thermal analysis -- 4.4 Polymer degradation -- References -- 5. Rheology and other instrumental techniques -- 5.1 Rheology -- 5.2 Mass spectrometry -- 5.3 Matrix-assisted laser desorption ionization (MALDI) mass spectrometry -- 5.4 Electron microscopy -- 5.5 Future trends -- References -- 6. Thermoplastics -- 6.1 Polyethylene (PE) -- 6.2 Polypropylene (PP) -- 6.3 Polystyrene (PS) -- 6.4 Polyethylene terephthalate (PET) -- 6.5 Polyvinylchloride (PVC) -- 6.6 Polymethylmethacrylate (PMMA) -- 6.7 Polyvinyl acetate (PVAC) -- 6.8 Nylon -- 6.9 Polycarbonate (PC) -- 6.10 Infrared bands for identification of thermoplastic materials -- 6.11 Future trends -- References -- 7. Thermosets -- 7.1 Phenol formaldehyde -- 7.2 Urea formaldehyde -- 7.3 Melamine formaldehyde -- 7.4 Epoxy thermosets -- 7.5 Future trends -- References -- 8. Polymer blends and composites -- 8.1 Polymer blends -- 8.2 Polymer composites -- 8.3 Future trends -- 8.4 Conclusion -- References -- Index. |
Record Nr. | UNINA-9910808408603321 |
Subramanian Muralisrinivasan | ||
New York : , : Momentum Press, LLC, , [2012] | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|