Research in materials and manufacturing technologies IV : selected, peer reviewed papers from the 4th Internatioanal Conference on Materials and Products Manufacturing Technology (ICMPMT 2014), September 18-19, 2014, Chongqing, China / / edited by Prasad Yarlagadda and Yun-Hae Kim |
Pubbl/distr/stampa | Zurich, Switzerland ; ; Enfield, New Hampshire : , : TTP, , 2015 |
Descrizione fisica | 1 online resource (1299 p.) |
Disciplina | 670 |
Collana | Advanced Materials Research |
Soggetto topico |
Manufactures
Manufacturing processes Materials science |
Soggetto genere / forma | Electronic books. |
ISBN | 3-03826-734-1 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Research in Materials and Manufacturing Technologies IV; Preface and Conference Organization; Table of Contents; Chapter 1: Metals and Alloys; Damage Identification of Low Carbon Steel under Tensile Based on Elastic Modulus; Effect of Heat Treatment on Conductivity of Cu-1.0Cr-0.12Zr Alloy; Effect of the Solid-Solution Treatment on the Die-Casting Structures and Properties of Commercial RE-AZ91D Mg Alloy; Effects of Compound Treatment of Pulsed Magnetic Field and Mechanical Vibration on Solidified Structure of Mg97Y2Cu1 Alloy
Microstructure and Properties of Niobium Microalloyed Pipeline Steel in CSP and Steel Pipe Produced by ERWPreparation of PMMA/PP/ PP-g-MAH Alloy; Study on the Precipitation Sequence of Aged NCu30-4-2-1 Alloy by DSC; The Application of Non-Linear Optimisation Algorithm to the Simulation of Nimonic Alloy 75 at Elevated Temperature; The Determination of Solution Temperature for NCu30-4-2-1 Alloy; Influence of Imidazoline Inhibitor on CO2 Corrosion of N80 Steel in Annulus Zone of Pump Recovery Well; Effect of Alternating Traveling Magnetic Field on the Removal of Inclusions from Aluminum Melt Effect of Atmosphere Proportion and Nitriding Time on Plasma Nitriding of Duplex Stainless SteelDiscussion on the Mechanism of Fe-Cr-Mo Electrodeposition; Effect of Segregation Purification Process on Content of Impurity Elements in High Purity Aluminum; Chapter 2: Composite Materials and Applications; Effect of Mg Content on Phase Structure and Electrical Properties of (Ba0.97Ca0.03)(Ti0.96-xZr0.04Mgx)O3 Ceramics; Effects of Different Sintering Temperature on the Microstructure and Piezoelectric Properties of Pb(Nb2/3Zn1/3)x(Zr52Ti48)1-XO3 Ceramics Fabrication of Pyrochlore Gd2Zr2O7 by High Temperature Solid State ReactionImproved Curie Temperature of Li-Doped Lead-Free (K,Na)NbO3 Ceramics Analysis; Improvement of Thermal Conductivity of Silicone by Carbon Nanotube Array (CNTA); In Situ Formation of Ti Matrix Composites Reinforced Nanometric TiC by Powder Metallurgy Technique; Microstructure and Reinforcing Mechanisms of Boron Carbide-Cerium Boride Porous Composites; Phase-Selective Synthesis of a Silicoaluminophosphate Molecular Sieve with 3-Aminopropyltriethoxysilane as the Silica Source Preparation Cu-Doped Carbon Aerogels and their Adsorptive Desulfurization PerformancePreparation of B4C-CeB6 Porous Composites by Hot Pressed Sintering; Study on the Heat Shrinkable Property of Opaque COC/PETG Film; Syntactic Foam Prepared with Glass Hollow Spheres of Designed Size and Wall Thickness Ratio; Synthesis and Characterization of Ni-Doped Carbon Aerogels; The Effect of Compound Corrosion Inhibitor of Sodium Silicate in the Chlorine Dioxide Solution; The Effect of pH on the Fluorescence Properties of Thermally Stable CMC/Eu Complexes Theoretical Analysis on Thermal Shock Resistance of Refractories |
Record Nr. | UNINA-9910459829503321 |
Zurich, Switzerland ; ; Enfield, New Hampshire : , : TTP, , 2015 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Research in materials and manufacturing technologies IV : selected, peer reviewed papers from the 4th Internatioanal Conference on Materials and Products Manufacturing Technology (ICMPMT 2014), September 18-19, 2014, Chongqing, China / / edited by Prasad Yarlagadda and Yun-Hae Kim |
Pubbl/distr/stampa | Zurich, Switzerland ; ; Enfield, New Hampshire : , : TTP, , 2015 |
Descrizione fisica | 1 online resource (1299 p.) |
Disciplina | 670 |
Collana | Advanced Materials Research |
Soggetto topico |
Manufactures
Manufacturing processes Materials science |
ISBN | 3-03826-734-1 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Research in Materials and Manufacturing Technologies IV; Preface and Conference Organization; Table of Contents; Chapter 1: Metals and Alloys; Damage Identification of Low Carbon Steel under Tensile Based on Elastic Modulus; Effect of Heat Treatment on Conductivity of Cu-1.0Cr-0.12Zr Alloy; Effect of the Solid-Solution Treatment on the Die-Casting Structures and Properties of Commercial RE-AZ91D Mg Alloy; Effects of Compound Treatment of Pulsed Magnetic Field and Mechanical Vibration on Solidified Structure of Mg97Y2Cu1 Alloy
Microstructure and Properties of Niobium Microalloyed Pipeline Steel in CSP and Steel Pipe Produced by ERWPreparation of PMMA/PP/ PP-g-MAH Alloy; Study on the Precipitation Sequence of Aged NCu30-4-2-1 Alloy by DSC; The Application of Non-Linear Optimisation Algorithm to the Simulation of Nimonic Alloy 75 at Elevated Temperature; The Determination of Solution Temperature for NCu30-4-2-1 Alloy; Influence of Imidazoline Inhibitor on CO2 Corrosion of N80 Steel in Annulus Zone of Pump Recovery Well; Effect of Alternating Traveling Magnetic Field on the Removal of Inclusions from Aluminum Melt Effect of Atmosphere Proportion and Nitriding Time on Plasma Nitriding of Duplex Stainless SteelDiscussion on the Mechanism of Fe-Cr-Mo Electrodeposition; Effect of Segregation Purification Process on Content of Impurity Elements in High Purity Aluminum; Chapter 2: Composite Materials and Applications; Effect of Mg Content on Phase Structure and Electrical Properties of (Ba0.97Ca0.03)(Ti0.96-xZr0.04Mgx)O3 Ceramics; Effects of Different Sintering Temperature on the Microstructure and Piezoelectric Properties of Pb(Nb2/3Zn1/3)x(Zr52Ti48)1-XO3 Ceramics Fabrication of Pyrochlore Gd2Zr2O7 by High Temperature Solid State ReactionImproved Curie Temperature of Li-Doped Lead-Free (K,Na)NbO3 Ceramics Analysis; Improvement of Thermal Conductivity of Silicone by Carbon Nanotube Array (CNTA); In Situ Formation of Ti Matrix Composites Reinforced Nanometric TiC by Powder Metallurgy Technique; Microstructure and Reinforcing Mechanisms of Boron Carbide-Cerium Boride Porous Composites; Phase-Selective Synthesis of a Silicoaluminophosphate Molecular Sieve with 3-Aminopropyltriethoxysilane as the Silica Source Preparation Cu-Doped Carbon Aerogels and their Adsorptive Desulfurization PerformancePreparation of B4C-CeB6 Porous Composites by Hot Pressed Sintering; Study on the Heat Shrinkable Property of Opaque COC/PETG Film; Syntactic Foam Prepared with Glass Hollow Spheres of Designed Size and Wall Thickness Ratio; Synthesis and Characterization of Ni-Doped Carbon Aerogels; The Effect of Compound Corrosion Inhibitor of Sodium Silicate in the Chlorine Dioxide Solution; The Effect of pH on the Fluorescence Properties of Thermally Stable CMC/Eu Complexes Theoretical Analysis on Thermal Shock Resistance of Refractories |
Record Nr. | UNINA-9910787104303321 |
Zurich, Switzerland ; ; Enfield, New Hampshire : , : TTP, , 2015 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Research in materials and manufacturing technologies IV : selected, peer reviewed papers from the 4th Internatioanal Conference on Materials and Products Manufacturing Technology (ICMPMT 2014), September 18-19, 2014, Chongqing, China / / edited by Prasad Yarlagadda and Yun-Hae Kim |
Pubbl/distr/stampa | Zurich, Switzerland ; ; Enfield, New Hampshire : , : TTP, , 2015 |
Descrizione fisica | 1 online resource (1299 p.) |
Disciplina | 670 |
Collana | Advanced Materials Research |
Soggetto topico |
Manufactures
Manufacturing processes Materials science |
ISBN | 3-03826-734-1 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Research in Materials and Manufacturing Technologies IV; Preface and Conference Organization; Table of Contents; Chapter 1: Metals and Alloys; Damage Identification of Low Carbon Steel under Tensile Based on Elastic Modulus; Effect of Heat Treatment on Conductivity of Cu-1.0Cr-0.12Zr Alloy; Effect of the Solid-Solution Treatment on the Die-Casting Structures and Properties of Commercial RE-AZ91D Mg Alloy; Effects of Compound Treatment of Pulsed Magnetic Field and Mechanical Vibration on Solidified Structure of Mg97Y2Cu1 Alloy
Microstructure and Properties of Niobium Microalloyed Pipeline Steel in CSP and Steel Pipe Produced by ERWPreparation of PMMA/PP/ PP-g-MAH Alloy; Study on the Precipitation Sequence of Aged NCu30-4-2-1 Alloy by DSC; The Application of Non-Linear Optimisation Algorithm to the Simulation of Nimonic Alloy 75 at Elevated Temperature; The Determination of Solution Temperature for NCu30-4-2-1 Alloy; Influence of Imidazoline Inhibitor on CO2 Corrosion of N80 Steel in Annulus Zone of Pump Recovery Well; Effect of Alternating Traveling Magnetic Field on the Removal of Inclusions from Aluminum Melt Effect of Atmosphere Proportion and Nitriding Time on Plasma Nitriding of Duplex Stainless SteelDiscussion on the Mechanism of Fe-Cr-Mo Electrodeposition; Effect of Segregation Purification Process on Content of Impurity Elements in High Purity Aluminum; Chapter 2: Composite Materials and Applications; Effect of Mg Content on Phase Structure and Electrical Properties of (Ba0.97Ca0.03)(Ti0.96-xZr0.04Mgx)O3 Ceramics; Effects of Different Sintering Temperature on the Microstructure and Piezoelectric Properties of Pb(Nb2/3Zn1/3)x(Zr52Ti48)1-XO3 Ceramics Fabrication of Pyrochlore Gd2Zr2O7 by High Temperature Solid State ReactionImproved Curie Temperature of Li-Doped Lead-Free (K,Na)NbO3 Ceramics Analysis; Improvement of Thermal Conductivity of Silicone by Carbon Nanotube Array (CNTA); In Situ Formation of Ti Matrix Composites Reinforced Nanometric TiC by Powder Metallurgy Technique; Microstructure and Reinforcing Mechanisms of Boron Carbide-Cerium Boride Porous Composites; Phase-Selective Synthesis of a Silicoaluminophosphate Molecular Sieve with 3-Aminopropyltriethoxysilane as the Silica Source Preparation Cu-Doped Carbon Aerogels and their Adsorptive Desulfurization PerformancePreparation of B4C-CeB6 Porous Composites by Hot Pressed Sintering; Study on the Heat Shrinkable Property of Opaque COC/PETG Film; Syntactic Foam Prepared with Glass Hollow Spheres of Designed Size and Wall Thickness Ratio; Synthesis and Characterization of Ni-Doped Carbon Aerogels; The Effect of Compound Corrosion Inhibitor of Sodium Silicate in the Chlorine Dioxide Solution; The Effect of pH on the Fluorescence Properties of Thermally Stable CMC/Eu Complexes Theoretical Analysis on Thermal Shock Resistance of Refractories |
Record Nr. | UNINA-9910816123103321 |
Zurich, Switzerland ; ; Enfield, New Hampshire : , : TTP, , 2015 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Resource efficiency in manufacturing value chains / / Stefan Alexander Blume |
Autore | Blume Stefan Alexander |
Edizione | [1st ed. 2020.] |
Pubbl/distr/stampa | Cham, Switzerland : , : Springer, , [2020] |
Descrizione fisica | 1 online resource (XX, 191 p. 37 illus., 28 illus. in color.) |
Disciplina | 628 |
Collana | Sustainable Production, Life Cycle Engineering and Management |
Soggetto topico |
Manufacturing processes
Production management - Environmental aspects Sustainable engineering |
ISBN | 3-030-51894-9 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Introduction -- Resource efficiency in manufacturing value chains -- Existing holistic approaches to increase resource efficiency in manufacturing -- Concept to increase resource efficiency in manufacturing value chains -- Concept implementation -- Concept application in the metal mechanic industry -- Summary and outlook. |
Record Nr. | UNINA-9910426043503321 |
Blume Stefan Alexander
![]() |
||
Cham, Switzerland : , : Springer, , [2020] | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Retooling manufacturing [[electronic resource] ] : bridging design, materials, and production / / Committee on Bridging Design and Manufacturing, Board on Manufacturing and Engineering Design, National Materials Advisory Board, Division on Engineering and Physical Sciences |
Pubbl/distr/stampa | Washington, DC, : National Academies Press, c2004 |
Descrizione fisica | 1 online resource (123 p.) |
Soggetto topico |
Manufacturing processes
Concurrent engineering Systems engineering Engineering design Production engineering |
Soggetto genere / forma | Electronic books. |
ISBN |
1-280-17593-1
9786610175932 0-309-53341-4 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Record Nr. | UNINA-9910450451403321 |
Washington, DC, : National Academies Press, c2004 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Retooling manufacturing [[electronic resource] ] : bridging design, materials, and production / / Committee on Bridging Design and Manufacturing, Board on Manufacturing and Engineering Design, National Materials Advisory Board, Division on Engineering and Physical Sciences |
Pubbl/distr/stampa | Washington, DC, : National Academies Press, c2004 |
Descrizione fisica | 1 online resource (123 p.) |
Disciplina | 670.42/7 |
Soggetto topico |
Manufacturing processes
Concurrent engineering Systems engineering Engineering design Production engineering |
ISBN |
0-309-18225-5
1-280-17593-1 9786610175932 0-309-53341-4 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Record Nr. | UNINA-9910783379903321 |
Washington, DC, : National Academies Press, c2004 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Retooling manufacturing [[electronic resource] ] : bridging design, materials, and production / / Committee on Bridging Design and Manufacturing, Board on Manufacturing and Engineering Design, National Materials Advisory Board, Division on Engineering and Physical Sciences |
Pubbl/distr/stampa | Washington, DC, : National Academies Press, c2004 |
Descrizione fisica | 1 online resource (123 p.) |
Disciplina | 670.42/7 |
Soggetto topico |
Manufacturing processes
Concurrent engineering Systems engineering Engineering design Production engineering |
ISBN |
0-309-18225-5
1-280-17593-1 9786610175932 0-309-53341-4 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Record Nr. | UNINA-9910810530703321 |
Washington, DC, : National Academies Press, c2004 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Review on Sustainability Characterization for Manufacturing Processes / / Mahesh Mani |
Pubbl/distr/stampa | Gaithersburg, MD : , : U.S. Dept. of Commerce, National Institute of Standards and Technology, , 2013 |
Descrizione fisica | 1 online resource (22 pages) : illustrations (color) |
Altri autori (Persone) |
GuptaSatyandra K
LeeJae Hyun LyonsKevin W MadanJatinder ManiMahesh |
Collana | NISTIR |
Soggetto topico |
Manufacturing processes
Performance - Measurement |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Record Nr. | UNINA-9910709595003321 |
Gaithersburg, MD : , : U.S. Dept. of Commerce, National Institute of Standards and Technology, , 2013 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Robust optimization : world's best practices for developing winning vehicles / / Subir Chowdhury, Shin Taguchi |
Autore | Chowdhury Subir |
Pubbl/distr/stampa | Chichester, England : , : Wiley, , 2016 |
Descrizione fisica | 1 online resource (527 p.) |
Disciplina | 629.231 |
Soggetto topico |
Motor vehicles - Design and construction
Robust optimization Manufacturing processes |
ISBN |
1-119-21214-6
1-119-21208-1 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Title Page; Copyright; Dedication; Preface; Acknowledgments; About the Authors; Chapter 1: Introduction to Robust Optimization; 1.1 What Is Quality as Loss?; 1.2 What Is Robustness?; 1.3 What Is Robust Assessment?; 1.4 What Is Robust Optimization?; Chapter 2: Eight Steps for Robust Optimization and Robust Assessment; 2.1 Before Eight Steps: Select Project Area; 2.2 Eight Steps for Robust Optimization; 2.3 Eight Steps for Robust Assessment; 2.4 As You Go through Case Studies in This Book; Chapter 3: Implementation of Robust Optimization; 3.1 Introduction; 3.2 Robust Optimization Implementation
Part One: Vehicle Level OptimizationChapter 4: Optimization of Vehicle Offset Crashworthy Design Using a Simplified Analysis Model; 4.1 Executive Summary; 4.2 Introduction; 4.3 Stepwise Implementation of DFSS Optimization for Vehicle Offset Impact; 4.4 Conclusion; References; Chapter 5: Optimization of the Component Characteristics for Improving Collision Safety by Simulation; 5.1 Executive Summary; 5.2 Introduction; 5.3 Simulation Models; 5.4 Concept of Standardized S/N Ratios with Respect to Survival Space; 5.5 Results and Consideration; 5.6 Conclusion; Reference Part Two: Subsystems Level Optimization by Original Equipment Manufacturers (OEMs)Chapter 6: Optimization of Small DC Motors Using Functionality for Evaluation; 6.1 Executive Summary; 6.2 Introduction; 6.3 Functionality for Evaluation in Case of DC Motors; 6.4 Experiment Method and Measurement Data; 6.5 Factors and Levels; 6.6 Data Analysis; 6.7 Analysis Results; 6.8 Selection of Optimal Design and Confirmation; 6.9 Benefits Gained; 6.10 Consideration of Analysis for Audible Noise; 6.11 Conclusion; Chapter 7: Optimal Design for a Double-Lift Window Regulator System Used in Automobiles 7.1 Executive Summary7.2 Introduction; 7.3 Schematic Figure of Double-Lift Window Regulator System; 7.4 Ideal Function; 7.5 Noise Factors; 7.6 Control Factors; 7.7 Conventional Data Analysis and Results; 7.8 Selection of Optimal Condition and Confirmation Test Results; 7.9 Evaluation of Quality Characteristics; 7.10 Concept of Analysis Based on Standardized S/N Ratio; 7.11 Analysis Results Based on Standardized S/N Ratio; 7.12 Comparison between Analysis Based on Standardized S/N Ratio and Analysis Based on Conventional S/N Ratio; 7.13 Conclusion; Further Reading Chapter 8: Optimization of Next-Generation Steering System Using Computer Simulation8.1 Executive Summary; 8.2 Introduction; 8.3 System Description; 8.4 Measurement Data; 8.5 Ideal Function; 8.6 Factors and Levels; 8.7 Pre-analysis for Compounding the Noise Factors; 8.8 Calculation of Standardized S/N Ratio; 8.9 Analysis Results; 8.10 Determination of Optimal Design and Confirmation; 8.11 Tuning to the Targeted Value; 8.12 Conclusion; Chapter 9: Future Truck Steering Effort Robustness; 9.1 Executive Summary; 9.2 Background; 9.3 Parameter Design; 9.4 Acknowledgments; References Chapter 10: Optimal Design of Engine Mounting System Based on Quality Engineering |
Record Nr. | UNINA-9910137486903321 |
Chowdhury Subir
![]() |
||
Chichester, England : , : Wiley, , 2016 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Scale-up [[electronic resource] ] : Modellübertragung in der Verfahrenstechnik / / Marko Zlokarnik |
Autore | Zlokarnik Marko <1931-> |
Edizione | [2nd ed.] |
Pubbl/distr/stampa | Weinheim [Germany] ; ; New York, : Wiley-VCH, c2005 |
Descrizione fisica | 1 online resource (297 p.) |
Disciplina | 670.42 |
Soggetto topico |
Manufacturing processes
Dimensional analysis |
Soggetto genere / forma | Electronic books. |
ISBN |
3-527-66046-1
1-280-66339-1 9786613640321 3-527-66098-4 3-527-60765-X |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | ger |
Nota di contenuto |
Title Page; Inhaltsverzeichnis; Beispiel 46: Dimensionierung von Reaktoren fuumalr katalytische Prozessein der Petrochemie; Beispiel 47: Dimensionierung eines Rohrreaktors mit Duumalsenmischerzur Durchfuumalhrung einer konkurrierenden Folgereaktion; Beispiel 48: Stofftransportlimitierung der Reaktionsgeschwindigkeitvon schnellen chemischen Reaktionen im heterogenenStoffsystem Gas/Fluumalssigkeit; Vorwort zur 1. Auflage; Vorwort zur 2. Auflage; Symbolverzeichnis; 1 Einfuumalhrungere; 2 Dimensionsanalyse; 2.1 Grundlage; 2.2 Was ist eine Dimension?; 2.3 Was ist eine physikalische Groumalbe?
2.4 Grundgroumalben und abgeleitete Groumalben Dimensionskonstanten; 2.5 Dimensionssysteme; 2.6 Dimensionshomogenitaumalt einer physikalischen Beziehung; Beispiel 1: Wovon haumalngt die Schwingungsperiode teta eines Pendels ab?; Beispiel 2 Wovon haumalngt die Falldauer teta eines Koumalrpers im homogenenGravitationsfeld ab (Gesetz des freien Falls)? Wovon haumalngt dieAusflubgeschwindigkeit v einer Fluumalssigkeit aus einem Gefaumalbmit Oumalffnung ab (Torricellische Ausflubformel)?; Beispiel 3: Zusammenhang zwischen der Groumalbe des Bratens undder Bratzeit; 2.7 Das pi-Theorem 3 Erarbeitung von pi-Saumaltzen mittels MatrizenumformungBeispiel 4: Druckverlust eines homogenen Fluids im geraden glatten Rohr(ohne Beruumalcksichtigung der Einlaufeffekte); 4 Mabstabsinvarianz des pi-Raumes - Grundlage der Modelluumalbertragung; Beispiel 5: Waumalrmeuumalbergang von geheizten Draaumalhten und Rohren anden Luftstrom....; 5 Wichtige Hinweise zur Aufstellung der Relevanzliste des Problems; 5.1 Behandlung von universellen physikalischen Konstanten; 5.2 Einfuumalhrung von Zwischengroumalben Beispiel 6: Mischzeit-Charakteristik bei Gemischen mit Dichte- und Viskositaumaltsunterschieden.....Beispiel 7: Flotationsvorgang bei der Druckentspannungsflotation; 6 Wichtige Aspekte bei der Modelluumalbertragung; 6.1 Modelluumalbertragung bei Nichtverfuumalgbarkeit von Modell-Stoffsystemen; Beispiel 8: Auslegungsunterlagen fuumalr mechanische Schaumzerstoumalrer...; 6.2 Modelluumalbertragung bei partieller Aumalhnlichkeit; Beispiel 9: Schleppwiderstand eines Schiffskoumalrpers Beispiel 10: Faustregeln beim Dimensionieren von Reaktionsapparaten:Volumenbezogene Ruuamlhrleistung und Lehrrohrgeschwindigkeitals Dimensionierungskriterien fuumalr Ruumalhrbehaumallter bzw. fuumalr Blasensaumalulen7 Vorlaumalufige Bestandsaufnahme; 7.1 Vorteile der Dimensionsanalyse; 7.2 Anwendbarkeitsbereich der Dimensionsanalyse; 7.3 Versuchstechnik bei der Modellouamlbertragung; 7.4 Versuchsdurchfuumalhrung unter Mabstabsaumalnderung; 8 Dimensionsanalytische Behandlung veraumalnderlicher Stoffgroumalben; 8.1 Wozu ist diese Betrachtung wichtig? 8.2 Dimensionslose Darstellung einer Stoff-Funktion |
Record Nr. | UNINA-9910143961903321 |
Zlokarnik Marko <1931->
![]() |
||
Weinheim [Germany] ; ; New York, : Wiley-VCH, c2005 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|