Advanced materials and processes IV : selected, peer reviewed papers from the 4th International Conference on Advanced Design and Manufacturing Engineering (ADME 2014), July 26-27, 2014, Hangzhou, China / / edited by Zhengyi Jiang [and four others] |
Pubbl/distr/stampa | Pfaffikon, Switzerland : , : TTP, , 2014 |
Descrizione fisica | 1 online resource (1337 p.) |
Disciplina | 670.42 |
Collana | Applied Mechanics and Materials |
Soggetto topico | Materials |
ISBN | 3-03826-640-X |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advanced Materials and Processes IV; Preface, Conference Organization and Committee; Table of Contents; Chapter 1: Nano Materials Science and Technology; Absorption Spectrum of Carbon Nanotubes; Cu-Ni Alloy Nanoparticles Supported on Multiwalled Carbon Nanotubes Composites with Pre-Treated Multiwalled Carbon; Effect of Electrospinning Process on Electrospun Chlorinated Polyvinyl Chloride (CPVC) Nanofibers; Enhanced H2 Sensing of SnO2 Nanowires Functionalized with Pt and Pd Catalyst Nanoparticles; Influence of Vacuum on Nano-Diamond Cathode Field Emission Characteristics
Piezoelectric Effect of Quaic-Nanotetrapods ZnO NanostructurePreparation and Characterization of the Amidoxime-Modified Polyacrylonitrile (PAN-Amidoxime) Nanofibre Composite; Size Effects of Heat Conduction for Silicon Nanograins; Viscosity of Al2O3 Nanoparticles Dispersed in Ethylene Glycol; Mechanical Properties of the Honeycomb Nanoporous Membranes; Bandgap Determination of Cubic Rocksalt AlN Film from Experimental and Theoretical Investigations; Chapter 2: Metals, Alloys and Technology; Comparative Analysis of Crack Growth Characteristics Based on Virtual Crack Closure Technique Effect of Iron Content on the Strength and Conductivity of Cu-Fe In Situ CompositeGas Sealing Performance Study of Metal W Shaped Seal Ring; Mechanical Property Comparison Analysis of Two Kinds of Shape Memory Alloy Patella Claws Based on Finite Element Method; Mechanics Analysis of Protective Casing and Splicing Sleeve; Research on the Mechanical Properties and Corrosion Resistance of Mg-RE and Mg-Zn-Cu Alloys; Study on Clinching of Titanium Alloy; The Electrochemical Behaviors of HSn70-1A Brass in Polluted Freshwater The Red Electroluminescence of Iridium Complex at Different Concentrations and Host MaterialsInfluence of Heat Treatment on Microstructure and Mechanical Properties of Die-Cast AZ91D Alloy with RE Elements; Research of Anti-Extrusion Process for Cylinder of Spray-Formed Ultra-High Strength Aluminum Alloy; Deformation Behavior of Mg-7Gd-5Y-1Nd-0.5Zr Alloy during Hot Compression; Experiment on Direct Smelting and Alloying Process between High-Carbon Ferrochrome and Molybdenum Oxide; Production of Fine-Grained and Weak Texture Structure in an Mg-7Gd-5Y-1Nd-0.5Zr Alloy by Multi-Axial Forging Research on Crack Region's Electrochemical Corrosion Performance in Hot-Dipping GalvanizingStudy on Hydrogen Content of Solid Industrial Pure Aluminum; Study on the Creep Properties and Microstructures of EW75 Alloy; Study on Tribological Performance of Al2O3 Particle Reinforced the Al-Sn Bearing Alloy; Research on Fatigue Notch Factor of Aluminum Corrosion Pits; The Investigation of Dynamic Stress Equilibrium of Compact Tension Specimen Based on Hopkinson Tension Bar Device; The Phase Change Study of Titanium Concentrate during Heat Treatment; Chapter 3: Steel Materials and Applications Control Model of Steel Ladle Base on Overlap Time among the Different Casts |
Record Nr. | UNINA-9910787023703321 |
Pfaffikon, Switzerland : , : TTP, , 2014 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advanced materials and processes IV : selected, peer reviewed papers from the 4th International Conference on Advanced Design and Manufacturing Engineering (ADME 2014), July 26-27, 2014, Hangzhou, China / / edited by Zhengyi Jiang [and four others] |
Pubbl/distr/stampa | Pfaffikon, Switzerland : , : TTP, , 2014 |
Descrizione fisica | 1 online resource (1337 p.) |
Disciplina | 670.42 |
Collana | Applied Mechanics and Materials |
Soggetto topico | Materials |
ISBN | 3-03826-640-X |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advanced Materials and Processes IV; Preface, Conference Organization and Committee; Table of Contents; Chapter 1: Nano Materials Science and Technology; Absorption Spectrum of Carbon Nanotubes; Cu-Ni Alloy Nanoparticles Supported on Multiwalled Carbon Nanotubes Composites with Pre-Treated Multiwalled Carbon; Effect of Electrospinning Process on Electrospun Chlorinated Polyvinyl Chloride (CPVC) Nanofibers; Enhanced H2 Sensing of SnO2 Nanowires Functionalized with Pt and Pd Catalyst Nanoparticles; Influence of Vacuum on Nano-Diamond Cathode Field Emission Characteristics
Piezoelectric Effect of Quaic-Nanotetrapods ZnO NanostructurePreparation and Characterization of the Amidoxime-Modified Polyacrylonitrile (PAN-Amidoxime) Nanofibre Composite; Size Effects of Heat Conduction for Silicon Nanograins; Viscosity of Al2O3 Nanoparticles Dispersed in Ethylene Glycol; Mechanical Properties of the Honeycomb Nanoporous Membranes; Bandgap Determination of Cubic Rocksalt AlN Film from Experimental and Theoretical Investigations; Chapter 2: Metals, Alloys and Technology; Comparative Analysis of Crack Growth Characteristics Based on Virtual Crack Closure Technique Effect of Iron Content on the Strength and Conductivity of Cu-Fe In Situ CompositeGas Sealing Performance Study of Metal W Shaped Seal Ring; Mechanical Property Comparison Analysis of Two Kinds of Shape Memory Alloy Patella Claws Based on Finite Element Method; Mechanics Analysis of Protective Casing and Splicing Sleeve; Research on the Mechanical Properties and Corrosion Resistance of Mg-RE and Mg-Zn-Cu Alloys; Study on Clinching of Titanium Alloy; The Electrochemical Behaviors of HSn70-1A Brass in Polluted Freshwater The Red Electroluminescence of Iridium Complex at Different Concentrations and Host MaterialsInfluence of Heat Treatment on Microstructure and Mechanical Properties of Die-Cast AZ91D Alloy with RE Elements; Research of Anti-Extrusion Process for Cylinder of Spray-Formed Ultra-High Strength Aluminum Alloy; Deformation Behavior of Mg-7Gd-5Y-1Nd-0.5Zr Alloy during Hot Compression; Experiment on Direct Smelting and Alloying Process between High-Carbon Ferrochrome and Molybdenum Oxide; Production of Fine-Grained and Weak Texture Structure in an Mg-7Gd-5Y-1Nd-0.5Zr Alloy by Multi-Axial Forging Research on Crack Region's Electrochemical Corrosion Performance in Hot-Dipping GalvanizingStudy on Hydrogen Content of Solid Industrial Pure Aluminum; Study on the Creep Properties and Microstructures of EW75 Alloy; Study on Tribological Performance of Al2O3 Particle Reinforced the Al-Sn Bearing Alloy; Research on Fatigue Notch Factor of Aluminum Corrosion Pits; The Investigation of Dynamic Stress Equilibrium of Compact Tension Specimen Based on Hopkinson Tension Bar Device; The Phase Change Study of Titanium Concentrate during Heat Treatment; Chapter 3: Steel Materials and Applications Control Model of Steel Ladle Base on Overlap Time among the Different Casts |
Record Nr. | UNINA-9910817314003321 |
Pfaffikon, Switzerland : , : TTP, , 2014 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advanced materials and processing technologies : IFMPT 2014 : selected, peer reviewed papers from the 2014 International Forum on Materials Processing Technology (IFMPT 2014), January 18-19, 2014, Guangzhou, China / / edited by Seung-Bok Choi and Yun-Hae Kim |
Pubbl/distr/stampa | Zurich, Switzerland : , : TTP, , 2014 |
Descrizione fisica | 1 online resource (835 p.) |
Disciplina | 670.42 |
Collana | Advanced Materials Research |
Soggetto topico |
Manufacturing processes
Production engineering Materials |
Soggetto genere / forma | Electronic books. |
ISBN | 3-03826-423-7 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advanced Materials and Processing Technologies: IFMPT 2014; Preface and Conference Organization; Table of Contents; Chapter 1: Polymers, Rubber and Elastomers; Characterization of Thermal Reversible Cross-Linking Agents for Flexible Poly(vinyl chloride); Compressive Behavior of a Polyurea Elastomer; Progress in Development of Catalyst Systems for Coordinated Polymerization of Olefins; Study of Molecular Structure of Water-Soluble Phenolic Resin with Different Molecular Weight by Infrared Spectrum
Synthesis of a Surfactant Hexadecyl Methyl Dihydroxyethyl Ammonium Bromide by a Non-Solvent Synthesis MethodStudy on Solvent Resistance of Ternary Plastic Alloys of PEEK/PEI/PES; Chapter 2: Metals and Alloys; A Novel Iron Oxidation Process in Zinc Leaching Solution by Ozone; Corrosion Behaviors of Mg-7Gd-5Y-1Nd-0.5Zr Alloys in CO2 Atmosphere under Different Relative Humidity; Effect of Rotating Magnetic Field on Fluid Convection and Microstructure during Directional Solidification of Sn-Zn Alloy; Experiments on Effect of Red Mud-Based Slag on Distribution of Sulfur in Liquid Iron Influence of Niobium or Molybdenum in Titanium Alloy for Permanent Implant ApplicationInner Connection of Bainite and Pearlite Transformation in Steels; Research on Impact Fracture and Microstructure of 40Cr Steel under Different Tempering Conditions; Simulation and Optimization of Flow Field in the Mold of Slab Continuous Casting; Study on Fe-Mn-Si Shape Memory Alloy Anti-Loosening Bolt; Study on the Forming Accuracy of TRIP Steel Products in ISF; The High Temperature Oxidation Behavior of Hot-Dip Aluminized GH169 Effect of Different Tempering Temperatures on Microstructure and Impact Property of 20CrMnTi SteelRelationship between Heat Treatments and Corrosion of Al-Si-Mg Casting Alloy; The Effect of Process Parameter on the Second Phase Particles in Al-Ti-B Master Alloys; The Modification Research of Al-Ti-B Master Alloy (Progress); A Closed Form Solution for Wave Propagation in a Rectangular Waveguide Filled with Time-Varying Media; Chapter 3: Ceramics; Effect of Sintering Temperature on Microstructure and Electrical Properties of (1-x)BCZT-xBY Lead-Free Ceramics Fused Silica Ceramics and Composites for Radome ApplicationsResearch Progress of Al2O3 Based and Si3N4 Based Ceramic Tool Materials; The Influence of Sintering Atmosphere and Reoxidation Temperature on the Electrical Properties of the Chip-Type Ba1-xSmxTiO3 Based Ceramics; Chapter 4: Composites; Microstructure and Mechanical Properties of Mg-Based Composites Reinforced with TiB2 Particles; Preparation and Properties of Organosilicon-Modified Acrylate Resin; Preparation of Functional Particles Modified Epoxy Multilayer Composite and their Radiation Shielding Properties The Influences of Holmium on Microstructure and Properties of In Situ Mg2Si/Al Composites |
Record Nr. | UNINA-9910464382403321 |
Zurich, Switzerland : , : TTP, , 2014 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advanced materials and processing technologies : IFMPT 2014 : selected, peer reviewed papers from the 2014 International Forum on Materials Processing Technology (IFMPT 2014), January 18-19, 2014, Guangzhou, China / / edited by Seung-Bok Choi and Yun-Hae Kim |
Pubbl/distr/stampa | Zurich, Switzerland : , : TTP, , 2014 |
Descrizione fisica | 1 online resource (835 p.) |
Disciplina | 670.42 |
Collana | Advanced Materials Research |
Soggetto topico |
Manufacturing processes
Production engineering Materials |
ISBN | 3-03826-423-7 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advanced Materials and Processing Technologies: IFMPT 2014; Preface and Conference Organization; Table of Contents; Chapter 1: Polymers, Rubber and Elastomers; Characterization of Thermal Reversible Cross-Linking Agents for Flexible Poly(vinyl chloride); Compressive Behavior of a Polyurea Elastomer; Progress in Development of Catalyst Systems for Coordinated Polymerization of Olefins; Study of Molecular Structure of Water-Soluble Phenolic Resin with Different Molecular Weight by Infrared Spectrum
Synthesis of a Surfactant Hexadecyl Methyl Dihydroxyethyl Ammonium Bromide by a Non-Solvent Synthesis MethodStudy on Solvent Resistance of Ternary Plastic Alloys of PEEK/PEI/PES; Chapter 2: Metals and Alloys; A Novel Iron Oxidation Process in Zinc Leaching Solution by Ozone; Corrosion Behaviors of Mg-7Gd-5Y-1Nd-0.5Zr Alloys in CO2 Atmosphere under Different Relative Humidity; Effect of Rotating Magnetic Field on Fluid Convection and Microstructure during Directional Solidification of Sn-Zn Alloy; Experiments on Effect of Red Mud-Based Slag on Distribution of Sulfur in Liquid Iron Influence of Niobium or Molybdenum in Titanium Alloy for Permanent Implant ApplicationInner Connection of Bainite and Pearlite Transformation in Steels; Research on Impact Fracture and Microstructure of 40Cr Steel under Different Tempering Conditions; Simulation and Optimization of Flow Field in the Mold of Slab Continuous Casting; Study on Fe-Mn-Si Shape Memory Alloy Anti-Loosening Bolt; Study on the Forming Accuracy of TRIP Steel Products in ISF; The High Temperature Oxidation Behavior of Hot-Dip Aluminized GH169 Effect of Different Tempering Temperatures on Microstructure and Impact Property of 20CrMnTi SteelRelationship between Heat Treatments and Corrosion of Al-Si-Mg Casting Alloy; The Effect of Process Parameter on the Second Phase Particles in Al-Ti-B Master Alloys; The Modification Research of Al-Ti-B Master Alloy (Progress); A Closed Form Solution for Wave Propagation in a Rectangular Waveguide Filled with Time-Varying Media; Chapter 3: Ceramics; Effect of Sintering Temperature on Microstructure and Electrical Properties of (1-x)BCZT-xBY Lead-Free Ceramics Fused Silica Ceramics and Composites for Radome ApplicationsResearch Progress of Al2O3 Based and Si3N4 Based Ceramic Tool Materials; The Influence of Sintering Atmosphere and Reoxidation Temperature on the Electrical Properties of the Chip-Type Ba1-xSmxTiO3 Based Ceramics; Chapter 4: Composites; Microstructure and Mechanical Properties of Mg-Based Composites Reinforced with TiB2 Particles; Preparation and Properties of Organosilicon-Modified Acrylate Resin; Preparation of Functional Particles Modified Epoxy Multilayer Composite and their Radiation Shielding Properties The Influences of Holmium on Microstructure and Properties of In Situ Mg2Si/Al Composites |
Record Nr. | UNINA-9910789105103321 |
Zurich, Switzerland : , : TTP, , 2014 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advanced materials and processing technologies : IFMPT 2014 : selected, peer reviewed papers from the 2014 International Forum on Materials Processing Technology (IFMPT 2014), January 18-19, 2014, Guangzhou, China / / edited by Seung-Bok Choi and Yun-Hae Kim |
Pubbl/distr/stampa | Zurich, Switzerland : , : TTP, , 2014 |
Descrizione fisica | 1 online resource (835 p.) |
Disciplina | 670.42 |
Collana | Advanced Materials Research |
Soggetto topico |
Manufacturing processes
Production engineering Materials |
ISBN | 3-03826-423-7 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advanced Materials and Processing Technologies: IFMPT 2014; Preface and Conference Organization; Table of Contents; Chapter 1: Polymers, Rubber and Elastomers; Characterization of Thermal Reversible Cross-Linking Agents for Flexible Poly(vinyl chloride); Compressive Behavior of a Polyurea Elastomer; Progress in Development of Catalyst Systems for Coordinated Polymerization of Olefins; Study of Molecular Structure of Water-Soluble Phenolic Resin with Different Molecular Weight by Infrared Spectrum
Synthesis of a Surfactant Hexadecyl Methyl Dihydroxyethyl Ammonium Bromide by a Non-Solvent Synthesis MethodStudy on Solvent Resistance of Ternary Plastic Alloys of PEEK/PEI/PES; Chapter 2: Metals and Alloys; A Novel Iron Oxidation Process in Zinc Leaching Solution by Ozone; Corrosion Behaviors of Mg-7Gd-5Y-1Nd-0.5Zr Alloys in CO2 Atmosphere under Different Relative Humidity; Effect of Rotating Magnetic Field on Fluid Convection and Microstructure during Directional Solidification of Sn-Zn Alloy; Experiments on Effect of Red Mud-Based Slag on Distribution of Sulfur in Liquid Iron Influence of Niobium or Molybdenum in Titanium Alloy for Permanent Implant ApplicationInner Connection of Bainite and Pearlite Transformation in Steels; Research on Impact Fracture and Microstructure of 40Cr Steel under Different Tempering Conditions; Simulation and Optimization of Flow Field in the Mold of Slab Continuous Casting; Study on Fe-Mn-Si Shape Memory Alloy Anti-Loosening Bolt; Study on the Forming Accuracy of TRIP Steel Products in ISF; The High Temperature Oxidation Behavior of Hot-Dip Aluminized GH169 Effect of Different Tempering Temperatures on Microstructure and Impact Property of 20CrMnTi SteelRelationship between Heat Treatments and Corrosion of Al-Si-Mg Casting Alloy; The Effect of Process Parameter on the Second Phase Particles in Al-Ti-B Master Alloys; The Modification Research of Al-Ti-B Master Alloy (Progress); A Closed Form Solution for Wave Propagation in a Rectangular Waveguide Filled with Time-Varying Media; Chapter 3: Ceramics; Effect of Sintering Temperature on Microstructure and Electrical Properties of (1-x)BCZT-xBY Lead-Free Ceramics Fused Silica Ceramics and Composites for Radome ApplicationsResearch Progress of Al2O3 Based and Si3N4 Based Ceramic Tool Materials; The Influence of Sintering Atmosphere and Reoxidation Temperature on the Electrical Properties of the Chip-Type Ba1-xSmxTiO3 Based Ceramics; Chapter 4: Composites; Microstructure and Mechanical Properties of Mg-Based Composites Reinforced with TiB2 Particles; Preparation and Properties of Organosilicon-Modified Acrylate Resin; Preparation of Functional Particles Modified Epoxy Multilayer Composite and their Radiation Shielding Properties The Influences of Holmium on Microstructure and Properties of In Situ Mg2Si/Al Composites |
Record Nr. | UNINA-9910807281103321 |
Zurich, Switzerland : , : TTP, , 2014 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advanced materials research IV : selected, peer reviewed papers from the 2014 4th International Conference on Advanced Materials Research (ICAMR 2014), January 22-23, 2014, Macau, China / / edited by Zhihua Guo and Jie Xu |
Pubbl/distr/stampa | Zurich, Switzerland : , : TTP, , 2014 |
Descrizione fisica | 1 online resource (451 p.) |
Disciplina | 670.42 |
Collana | Advanced Materials Research |
Soggetto topico |
Manufacturing processes
Materials |
Soggetto genere / forma | Electronic books. |
ISBN | 3-03826-413-X |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advanced Materials Research IV; Preface, Committees and Sponsors; Table of Contents; Chapter 1: Composite Materials; Saccharose Particles as a Space Holder for Ti-Void Composite Preparation; Fabrication of Homogeneously Dispersed Nanoneedle Manganese Dioxide/Graphene Composite for High-Performance Electrode Use in Supercapacitor; Variation in Fineness of Cement-Based Composites Containing Sugarcane Bagasse Ashes; The Construction Technique of Steel-Wood Composite Core Formwork in a Large Span Prestressed Hollow Box Guider
Machinability Assessment of Aluminium-Graphite-Silicon Carbide Hybrid CompositesMachinability Studies on Aluminium Matrix Hybrid Composites; Thermal Degradation of Flax Fibres as Potential Reinforcement in Thermoplastic Composites; Modification of Titanium Dioxide Embedded in the Bio-Composite Film for Photocatalytic Oxidation of Chlorinated Volatile Organic Compound; Chapter 2: Materials for Civil Engineering Applications; Ultrasonic Test on Recycled Concrete: Relationship among Ultrasonic Waves Velocity, Compressive Strength and Elastic Modulus New Production Technology of Cement ParticleboardAn Investigation on Effect of Oil Palm Shell Ash on Flexural Strength and Compressive Strength of Cement Mortar; The Exploration of the Optimal Manufacturing Conditions of PE Modified Asphalt; Effect of Seashell Powder on Flexural and Compressive Strength of Cement Mortar in Early Age; Using High Temperature for Improve Compressive Strength of Ordinary Portland Cement Paste (OPC) - A New Approach; Prediction of Concrete Compressive Strength by Means of Combined Non-Destructive Testing Mechanism of Frictional Mortar-Less Panel and its Application in Reinforcement Concrete FrameThe Application of Green Material in Modern Architecture; Chapter 3: Materials Engineering and Processing Technologies; Wear Monitoring on Microcrystalline Aluminum Oxide Grinding Wheels on Profile Grinding with the Aid of Acoustic Emission; Mechanical Properties of Dendritic and Inter-Dendritic Regions in As-Cast Medium-Carbon Steel; Erosion Behaviors of Impeller Material FV520B in Centrifugal Compressor The Formation of the Carbon Microcoils without the Catalyst on the Mesh-Type Stainless Steel SubstrateThermodynamics of Cr(VI) Adsorption on Thiourea Chelating Ion Exchange Fiber; Serrated Flow in an 11Cr Ferritic/Martensitic Steel; Corrosion Test about Interference of Cathodic Protection Systems in Marine Concrete Structure; Investigation of AC8A Scrap-Recycled Aluminum Foams; An Improvement in Tarnish and Corrosion Resistance of 94Ag-4Zn-Cu Alloys with Sn Addition; Molecularly Imprinted Polymers for the Analysis of Environmental Estrogen Bisphenol A Proposition of a New Valid Utilization for Shirasu Volcanic Ash Using Renewable Energy |
Record Nr. | UNINA-9910464546103321 |
Zurich, Switzerland : , : TTP, , 2014 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advanced materials research IV : selected, peer reviewed papers from the 2014 4th International Conference on Advanced Materials Research (ICAMR 2014), January 22-23, 2014, Macau, China / / edited by Zhihua Guo and Jie Xu |
Pubbl/distr/stampa | Zurich, Switzerland : , : TTP, , 2014 |
Descrizione fisica | 1 online resource (451 p.) |
Disciplina | 670.42 |
Collana | Advanced Materials Research |
Soggetto topico |
Manufacturing processes
Materials |
ISBN | 3-03826-413-X |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advanced Materials Research IV; Preface, Committees and Sponsors; Table of Contents; Chapter 1: Composite Materials; Saccharose Particles as a Space Holder for Ti-Void Composite Preparation; Fabrication of Homogeneously Dispersed Nanoneedle Manganese Dioxide/Graphene Composite for High-Performance Electrode Use in Supercapacitor; Variation in Fineness of Cement-Based Composites Containing Sugarcane Bagasse Ashes; The Construction Technique of Steel-Wood Composite Core Formwork in a Large Span Prestressed Hollow Box Guider
Machinability Assessment of Aluminium-Graphite-Silicon Carbide Hybrid CompositesMachinability Studies on Aluminium Matrix Hybrid Composites; Thermal Degradation of Flax Fibres as Potential Reinforcement in Thermoplastic Composites; Modification of Titanium Dioxide Embedded in the Bio-Composite Film for Photocatalytic Oxidation of Chlorinated Volatile Organic Compound; Chapter 2: Materials for Civil Engineering Applications; Ultrasonic Test on Recycled Concrete: Relationship among Ultrasonic Waves Velocity, Compressive Strength and Elastic Modulus New Production Technology of Cement ParticleboardAn Investigation on Effect of Oil Palm Shell Ash on Flexural Strength and Compressive Strength of Cement Mortar; The Exploration of the Optimal Manufacturing Conditions of PE Modified Asphalt; Effect of Seashell Powder on Flexural and Compressive Strength of Cement Mortar in Early Age; Using High Temperature for Improve Compressive Strength of Ordinary Portland Cement Paste (OPC) - A New Approach; Prediction of Concrete Compressive Strength by Means of Combined Non-Destructive Testing Mechanism of Frictional Mortar-Less Panel and its Application in Reinforcement Concrete FrameThe Application of Green Material in Modern Architecture; Chapter 3: Materials Engineering and Processing Technologies; Wear Monitoring on Microcrystalline Aluminum Oxide Grinding Wheels on Profile Grinding with the Aid of Acoustic Emission; Mechanical Properties of Dendritic and Inter-Dendritic Regions in As-Cast Medium-Carbon Steel; Erosion Behaviors of Impeller Material FV520B in Centrifugal Compressor The Formation of the Carbon Microcoils without the Catalyst on the Mesh-Type Stainless Steel SubstrateThermodynamics of Cr(VI) Adsorption on Thiourea Chelating Ion Exchange Fiber; Serrated Flow in an 11Cr Ferritic/Martensitic Steel; Corrosion Test about Interference of Cathodic Protection Systems in Marine Concrete Structure; Investigation of AC8A Scrap-Recycled Aluminum Foams; An Improvement in Tarnish and Corrosion Resistance of 94Ag-4Zn-Cu Alloys with Sn Addition; Molecularly Imprinted Polymers for the Analysis of Environmental Estrogen Bisphenol A Proposition of a New Valid Utilization for Shirasu Volcanic Ash Using Renewable Energy |
Record Nr. | UNINA-9910789107603321 |
Zurich, Switzerland : , : TTP, , 2014 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advanced materials research IV : selected, peer reviewed papers from the 2014 4th International Conference on Advanced Materials Research (ICAMR 2014), January 22-23, 2014, Macau, China / / edited by Zhihua Guo and Jie Xu |
Pubbl/distr/stampa | Zurich, Switzerland : , : TTP, , 2014 |
Descrizione fisica | 1 online resource (451 p.) |
Disciplina | 670.42 |
Collana | Advanced Materials Research |
Soggetto topico |
Manufacturing processes
Materials |
ISBN | 3-03826-413-X |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advanced Materials Research IV; Preface, Committees and Sponsors; Table of Contents; Chapter 1: Composite Materials; Saccharose Particles as a Space Holder for Ti-Void Composite Preparation; Fabrication of Homogeneously Dispersed Nanoneedle Manganese Dioxide/Graphene Composite for High-Performance Electrode Use in Supercapacitor; Variation in Fineness of Cement-Based Composites Containing Sugarcane Bagasse Ashes; The Construction Technique of Steel-Wood Composite Core Formwork in a Large Span Prestressed Hollow Box Guider
Machinability Assessment of Aluminium-Graphite-Silicon Carbide Hybrid CompositesMachinability Studies on Aluminium Matrix Hybrid Composites; Thermal Degradation of Flax Fibres as Potential Reinforcement in Thermoplastic Composites; Modification of Titanium Dioxide Embedded in the Bio-Composite Film for Photocatalytic Oxidation of Chlorinated Volatile Organic Compound; Chapter 2: Materials for Civil Engineering Applications; Ultrasonic Test on Recycled Concrete: Relationship among Ultrasonic Waves Velocity, Compressive Strength and Elastic Modulus New Production Technology of Cement ParticleboardAn Investigation on Effect of Oil Palm Shell Ash on Flexural Strength and Compressive Strength of Cement Mortar; The Exploration of the Optimal Manufacturing Conditions of PE Modified Asphalt; Effect of Seashell Powder on Flexural and Compressive Strength of Cement Mortar in Early Age; Using High Temperature for Improve Compressive Strength of Ordinary Portland Cement Paste (OPC) - A New Approach; Prediction of Concrete Compressive Strength by Means of Combined Non-Destructive Testing Mechanism of Frictional Mortar-Less Panel and its Application in Reinforcement Concrete FrameThe Application of Green Material in Modern Architecture; Chapter 3: Materials Engineering and Processing Technologies; Wear Monitoring on Microcrystalline Aluminum Oxide Grinding Wheels on Profile Grinding with the Aid of Acoustic Emission; Mechanical Properties of Dendritic and Inter-Dendritic Regions in As-Cast Medium-Carbon Steel; Erosion Behaviors of Impeller Material FV520B in Centrifugal Compressor The Formation of the Carbon Microcoils without the Catalyst on the Mesh-Type Stainless Steel SubstrateThermodynamics of Cr(VI) Adsorption on Thiourea Chelating Ion Exchange Fiber; Serrated Flow in an 11Cr Ferritic/Martensitic Steel; Corrosion Test about Interference of Cathodic Protection Systems in Marine Concrete Structure; Investigation of AC8A Scrap-Recycled Aluminum Foams; An Improvement in Tarnish and Corrosion Resistance of 94Ag-4Zn-Cu Alloys with Sn Addition; Molecularly Imprinted Polymers for the Analysis of Environmental Estrogen Bisphenol A Proposition of a New Valid Utilization for Shirasu Volcanic Ash Using Renewable Energy |
Record Nr. | UNINA-9910820212203321 |
Zurich, Switzerland : , : TTP, , 2014 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advances in Additive Manufacturing and Joining [[electronic resource] ] : Proceedings of AIMTDR 2018 / / edited by M. S. Shunmugam, M. Kanthababu |
Edizione | [1st ed. 2020.] |
Pubbl/distr/stampa | Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 |
Descrizione fisica | 1 online resource (xxi, 749 pages) : illustrations |
Disciplina | 670.42 |
Collana | Lecture Notes on Multidisciplinary Industrial Engineering |
Soggetto topico |
Manufactures
Engineering design Engineering—Materials Structural materials Manufacturing, Machines, Tools, Processes Engineering Design Materials Engineering Structural Materials |
ISBN | 981-329-433-7 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | Fabrication of Customized Ankle Foot Orthosis (AFO) by Reverse Engineering using Fused Deposition Modeling -- Friction Stir Welding of Three Dimensional Printed Polymer Composites with Semi-Consumable Tool -- Mechanical Characterization and Process Optimization of PolyJet 3D Printing using Digital ABS with Different Part Geometries -- Retrofitment of Laser Cladding System with CNC Machine for Hybrid Layer Manufacturing -- Influence of Various tool path patterns on Hardness used in Weld-Deposition based Additive Manufacturing. |
Record Nr. | UNINA-9910366622003321 |
Singapore : , : Springer Singapore : , : Imprint : Springer, , 2020 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advances in CAD/CAM : proceedings of the 5th international IFIP/IFAC conference on programming research and operations logistics in advanced manufacturing technology PROLAMAT 82, Leningrad, USSR, 16-18 may, 1982 / edited by T. M. R. Ellis, O. I. Semenkov |
Autore | International IFIP/IFAC conference on programming research and operations logistics in advanced manufacturing technology : <5. ; : 1982 |
Pubbl/distr/stampa | Amsterdam : North-Holland, 1983 |
Descrizione fisica | 720 p. : ill. ; 24 cm |
Disciplina | 670.42 |
Soggetto non controllato | Ingegneria della produzione - Elaborazione dei dati - Congressi |
ISBN | 0-444-86549-7 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Record Nr. | UNINA-990000459620403321 |
International IFIP/IFAC conference on programming research and operations logistics in advanced manufacturing technology : <5. ; : 1982
![]() |
||
Amsterdam : North-Holland, 1983 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|