Site surveying and levelling / / John Clancy |
Autore | Clancy John, Dip. Arch. |
Edizione | [Second edition.] |
Pubbl/distr/stampa | Abingdon, Oxon : , : Routledge, , 2011 |
Descrizione fisica | 1 online resource (332 p.) |
Disciplina | 526.9 |
Soggetto topico |
Surveying
Leveling |
ISBN |
1-135-13816-8
0-08-092848-X 1-299-28760-3 1-135-13817-6 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Cover; Site Surveying and Levelling; Copyright; Contents; Preface to 2nd Edition; Preface to 1st Edition; Acknowledgements; Introduction - what is surveying?; Types of surveyor; The origins of land survey; Land surveying as it affects the construction industry; 1 Basic Principles; 1.1 Purposes of surveying; 1.2 Branches of surveying; 1.3 Branches of technique; 1.4 Basic survey methods; 1.5 Conducting a survey; 1.5.8 Ordnance Survey; 1.6 Accuracy and precision; 1.7 Errors; 1.8 Control; 1.9 Summary; Exercises on Chapter 1; 2 Linear measurement - principles and equipment; 2.1 Basic terminology
2.2 Equipment and instruments2.3 Equipment used for linear measurement; 2.4 Use of equipment for linear measurement; 2.5 Instruments for 90° setting-out and slope measurement; 2.6 Use of instruments for measuring angles; 2.7 Equipment for noting information in the field; Exercises on Chapter 2; 3 Linear measurement - fieldwork practice; 3.1 Errors in chaining; 3.2 Measuring offsets; 3.3 Division of the offset area; 3.4 Fixing buildings and artefacts; 3.5 Setting out a right angle by chain and/or tape; 3.6 To drop a perpendicular to a line from a point outside the line 3.7 Setting out a 45° angle3.8 Setting out 60° and 30° angles; 3.9 Obstructions in chaining; 3.10 Chaining free, vision obstructed; 3.11 Chaining obstructed, vision free; 3.12 Chaining and vision both obstructed; 3.13 Other aspects of dealing with obstructions; 3.14 Chain angles; 3.15 Plotting the survey; 3.16 Construction of scales; 3.17 Calculation of areas; 3.18 Summary; Exercises on Chapter 3; 4 Levelling - principles and equipment; 4.1 Reasons for levelling operations; 4.2 Principles of ordinary levelling; 4.3 Methods of obtaining a horizontal line or plane; 4.4 Principles of the level 4.5 Types of level4.6 Instrument adjustments; 4.7 Levelling staves; 4.8 General; Exercises on Chapter 4; 5 Practical levelling and contouring; 5.1 Definitions; 5.2 Ordinary levelling; 5.3 Tacheometry; 5.4 Fieldwork procedure; 5.5 Temporary adjustments; 5.6 Types of level book; 5.7 'One-set up' levelling; 5.8 Series levelling; 5.9 Recriprocal levelling; 5.10 Flying levels; 5.11 Trial levels; 5.12 Principles of area levelling and contouring; 5.13 Direct levelling for contours; 5.14 Indirect levelling for contours; 5.15 Section levelling; 5.16 Inverse levelling; 5.17 Errors and adjustments 5.18 Permissible error in levelling5.19 Adjustment of the level book; 5.20 The permanent adjustments of the level; Exercises on Chapter 5; 6 Angular measurement; 6.1 Uses of the theodolite; 6.2 Development of the theodolite; 6.3 Setting up the theodolite; 6.4 Moving to another station; 6.5 End of the work; 6.6 Reading systems; 6.7 Face of the theodolite and compensated measurement; 6.8 Measurement of horizontal angles; 6.9 Measuring horizontal angles by prismatic compass; 6.10 Bearings; 6.11 Traverse surveys; 6.12 Extending straight lines by theodolite; 6.13 Lining-in by theodolite 6.14 Computation of true horizontal length |
Record Nr. | UNINA-9910792034803321 |
Clancy John, Dip. Arch. | ||
Abingdon, Oxon : , : Routledge, , 2011 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Site surveying and levelling / / John Clancy |
Autore | Clancy John, Dip. Arch. |
Edizione | [Second edition.] |
Pubbl/distr/stampa | Abingdon, Oxon : , : Routledge, , 2011 |
Descrizione fisica | 1 online resource (332 p.) |
Disciplina | 526.9 |
Soggetto topico |
Surveying
Leveling |
ISBN |
1-135-13816-8
0-08-092848-X 1-299-28760-3 1-135-13817-6 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Cover; Site Surveying and Levelling; Copyright; Contents; Preface to 2nd Edition; Preface to 1st Edition; Acknowledgements; Introduction - what is surveying?; Types of surveyor; The origins of land survey; Land surveying as it affects the construction industry; 1 Basic Principles; 1.1 Purposes of surveying; 1.2 Branches of surveying; 1.3 Branches of technique; 1.4 Basic survey methods; 1.5 Conducting a survey; 1.5.8 Ordnance Survey; 1.6 Accuracy and precision; 1.7 Errors; 1.8 Control; 1.9 Summary; Exercises on Chapter 1; 2 Linear measurement - principles and equipment; 2.1 Basic terminology
2.2 Equipment and instruments2.3 Equipment used for linear measurement; 2.4 Use of equipment for linear measurement; 2.5 Instruments for 90° setting-out and slope measurement; 2.6 Use of instruments for measuring angles; 2.7 Equipment for noting information in the field; Exercises on Chapter 2; 3 Linear measurement - fieldwork practice; 3.1 Errors in chaining; 3.2 Measuring offsets; 3.3 Division of the offset area; 3.4 Fixing buildings and artefacts; 3.5 Setting out a right angle by chain and/or tape; 3.6 To drop a perpendicular to a line from a point outside the line 3.7 Setting out a 45° angle3.8 Setting out 60° and 30° angles; 3.9 Obstructions in chaining; 3.10 Chaining free, vision obstructed; 3.11 Chaining obstructed, vision free; 3.12 Chaining and vision both obstructed; 3.13 Other aspects of dealing with obstructions; 3.14 Chain angles; 3.15 Plotting the survey; 3.16 Construction of scales; 3.17 Calculation of areas; 3.18 Summary; Exercises on Chapter 3; 4 Levelling - principles and equipment; 4.1 Reasons for levelling operations; 4.2 Principles of ordinary levelling; 4.3 Methods of obtaining a horizontal line or plane; 4.4 Principles of the level 4.5 Types of level4.6 Instrument adjustments; 4.7 Levelling staves; 4.8 General; Exercises on Chapter 4; 5 Practical levelling and contouring; 5.1 Definitions; 5.2 Ordinary levelling; 5.3 Tacheometry; 5.4 Fieldwork procedure; 5.5 Temporary adjustments; 5.6 Types of level book; 5.7 'One-set up' levelling; 5.8 Series levelling; 5.9 Recriprocal levelling; 5.10 Flying levels; 5.11 Trial levels; 5.12 Principles of area levelling and contouring; 5.13 Direct levelling for contours; 5.14 Indirect levelling for contours; 5.15 Section levelling; 5.16 Inverse levelling; 5.17 Errors and adjustments 5.18 Permissible error in levelling5.19 Adjustment of the level book; 5.20 The permanent adjustments of the level; Exercises on Chapter 5; 6 Angular measurement; 6.1 Uses of the theodolite; 6.2 Development of the theodolite; 6.3 Setting up the theodolite; 6.4 Moving to another station; 6.5 End of the work; 6.6 Reading systems; 6.7 Face of the theodolite and compensated measurement; 6.8 Measurement of horizontal angles; 6.9 Measuring horizontal angles by prismatic compass; 6.10 Bearings; 6.11 Traverse surveys; 6.12 Extending straight lines by theodolite; 6.13 Lining-in by theodolite 6.14 Computation of true horizontal length |
Record Nr. | UNINA-9910826772403321 |
Clancy John, Dip. Arch. | ||
Abingdon, Oxon : , : Routledge, , 2011 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Solids level measurement and detection handbook / / Joe Lewis |
Autore | Lewis Joe |
Pubbl/distr/stampa | New York : , : Momentum Press, , [2012] |
Descrizione fisica | 1 online resource (228 p.) |
Disciplina | 526.9 |
Soggetto topico |
Level indicators
Bulk solids - Measurement |
Soggetto genere / forma | Electronic books. |
ISBN |
1-283-89563-3
1-60650-256-5 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Preface -- Introduction --
Chapter 1. General use and applications -- 1.1 What is level measurement? -- 1.2 The categories of level measurement -- 1.3 Differences between liquid and bulk solid levels -- 1.4 Conclusion -- Chapter 2. Point level: an introduction -- 2.1 What is point level measurement? -- 2.2 A word about "Process control" -- 2.3 Point level sensor technology -- 2.4 Conclusion -- Chapter 3. Point level: technology selection -- 3.1 Installation/process -- 3.2 Material characteristics -- 3.3 Conclusion -- Chapter 4. Point level: specialty technologies -- 4.1 Beam-breaker -- 4.2 Radiometric point level sensor -- 4.3 Conclusion -- Chapter 5. Introduction to contents measurement -- 5.1 Introduction -- 5.2 Choosing a measuring strategy -- 5.3 Application considerations -- 5.4 Conclusion -- Chapter 6. Contents measurement: level technology selection -- 6.1 Introduction -- 6.2 Level measurement technologies for contents inventory measurement -- 6.3 Surface mapping level sensor techniques -- 6.4 Conclusion -- Chapter 7. Contents measurement: weighing technology -- 7.1 Introduction -- 7.2 Stationary weight measuring sensor systems -- 7.3 Pressed-in/bolted-on strain gauge type sensor system -- 7.4 Conclusion -- Chapter 8. Conclusions -- 8.1 Level control -- 8.2 Bin contents measurement -- 8.3 Conclusion -- Appendix A. Safety -- 1. Introduction -- 2. An introduction to safety instrumented systems and safety integrity levels -- 3. An introduction to hazardous electrical locations -- 4. Conclusion -- 5. Appendix for hazardous locations -- Appendix B. Bulk solids flow -- 1. Introduction -- 2. Stresses in bulk solids -- 3. Adhesive forces -- 4. Flowability -- 5. Practical determination of flow properties -- 6. Further measurement methods and devices for the determination of bulk solid properties -- 7. Summary -- Index. |
Record Nr. | UNINA-9910461081703321 |
Lewis Joe | ||
New York : , : Momentum Press, , [2012] | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Solids level measurement and detection handbook / / Joe Lewis |
Autore | Lewis Joe |
Pubbl/distr/stampa | New York : , : Momentum Press, , [2012] |
Descrizione fisica | 1 online resource (228 p.) |
Disciplina | 526.9 |
Soggetto topico |
Level indicators
Bulk solids - Measurement |
ISBN |
1-283-89563-3
1-60650-256-5 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Preface -- Introduction --
Chapter 1. General use and applications -- 1.1 What is level measurement? -- 1.2 The categories of level measurement -- 1.3 Differences between liquid and bulk solid levels -- 1.4 Conclusion -- Chapter 2. Point level: an introduction -- 2.1 What is point level measurement? -- 2.2 A word about "Process control" -- 2.3 Point level sensor technology -- 2.4 Conclusion -- Chapter 3. Point level: technology selection -- 3.1 Installation/process -- 3.2 Material characteristics -- 3.3 Conclusion -- Chapter 4. Point level: specialty technologies -- 4.1 Beam-breaker -- 4.2 Radiometric point level sensor -- 4.3 Conclusion -- Chapter 5. Introduction to contents measurement -- 5.1 Introduction -- 5.2 Choosing a measuring strategy -- 5.3 Application considerations -- 5.4 Conclusion -- Chapter 6. Contents measurement: level technology selection -- 6.1 Introduction -- 6.2 Level measurement technologies for contents inventory measurement -- 6.3 Surface mapping level sensor techniques -- 6.4 Conclusion -- Chapter 7. Contents measurement: weighing technology -- 7.1 Introduction -- 7.2 Stationary weight measuring sensor systems -- 7.3 Pressed-in/bolted-on strain gauge type sensor system -- 7.4 Conclusion -- Chapter 8. Conclusions -- 8.1 Level control -- 8.2 Bin contents measurement -- 8.3 Conclusion -- Appendix A. Safety -- 1. Introduction -- 2. An introduction to safety instrumented systems and safety integrity levels -- 3. An introduction to hazardous electrical locations -- 4. Conclusion -- 5. Appendix for hazardous locations -- Appendix B. Bulk solids flow -- 1. Introduction -- 2. Stresses in bulk solids -- 3. Adhesive forces -- 4. Flowability -- 5. Practical determination of flow properties -- 6. Further measurement methods and devices for the determination of bulk solid properties -- 7. Summary -- Index. |
Record Nr. | UNINA-9910790155803321 |
Lewis Joe | ||
New York : , : Momentum Press, , [2012] | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Solids level measurement and detection handbook / / Joe Lewis |
Autore | Lewis Joe |
Pubbl/distr/stampa | New York : , : Momentum Press, , [2012] |
Descrizione fisica | 1 online resource (228 p.) |
Disciplina | 526.9 |
Soggetto topico |
Level indicators
Bulk solids - Measurement |
ISBN |
1-283-89563-3
1-60650-256-5 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Preface -- Introduction --
Chapter 1. General use and applications -- 1.1 What is level measurement? -- 1.2 The categories of level measurement -- 1.3 Differences between liquid and bulk solid levels -- 1.4 Conclusion -- Chapter 2. Point level: an introduction -- 2.1 What is point level measurement? -- 2.2 A word about "Process control" -- 2.3 Point level sensor technology -- 2.4 Conclusion -- Chapter 3. Point level: technology selection -- 3.1 Installation/process -- 3.2 Material characteristics -- 3.3 Conclusion -- Chapter 4. Point level: specialty technologies -- 4.1 Beam-breaker -- 4.2 Radiometric point level sensor -- 4.3 Conclusion -- Chapter 5. Introduction to contents measurement -- 5.1 Introduction -- 5.2 Choosing a measuring strategy -- 5.3 Application considerations -- 5.4 Conclusion -- Chapter 6. Contents measurement: level technology selection -- 6.1 Introduction -- 6.2 Level measurement technologies for contents inventory measurement -- 6.3 Surface mapping level sensor techniques -- 6.4 Conclusion -- Chapter 7. Contents measurement: weighing technology -- 7.1 Introduction -- 7.2 Stationary weight measuring sensor systems -- 7.3 Pressed-in/bolted-on strain gauge type sensor system -- 7.4 Conclusion -- Chapter 8. Conclusions -- 8.1 Level control -- 8.2 Bin contents measurement -- 8.3 Conclusion -- Appendix A. Safety -- 1. Introduction -- 2. An introduction to safety instrumented systems and safety integrity levels -- 3. An introduction to hazardous electrical locations -- 4. Conclusion -- 5. Appendix for hazardous locations -- Appendix B. Bulk solids flow -- 1. Introduction -- 2. Stresses in bulk solids -- 3. Adhesive forces -- 4. Flowability -- 5. Practical determination of flow properties -- 6. Further measurement methods and devices for the determination of bulk solid properties -- 7. Summary -- Index. |
Record Nr. | UNINA-9910819980303321 |
Lewis Joe | ||
New York : , : Momentum Press, , [2012] | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Solution of problems in surveying and field astronomy / by H. W. Stephenson |
Autore | Stephenson, Henry Walter |
Pubbl/distr/stampa | London : Pitman, 1955 |
Descrizione fisica | 287 p. : ill. ; 19 cm |
Disciplina | 526.9 |
Soggetto non controllato | Topografia |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Record Nr. | UNIPARTHENOPE-000013101 |
Stephenson, Henry Walter | ||
London : Pitman, 1955 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Parthenope | ||
|
Solving problems in surveying / A. Bannister, R. Baker |
Autore | Bannister, Arthur |
Edizione | [2. ed] |
Pubbl/distr/stampa | Harlow : Longman, 1994 |
Descrizione fisica | 346 p. : ill. ; 24 cm. - Includes index |
Disciplina | 526.9 |
Altri autori (Persone) | Baker, Raymond |
ISBN | 05-8223-644-4 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Record Nr. | UNICAMPANIA-SUN0038711 |
Bannister, Arthur | ||
Harlow : Longman, 1994 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Vanvitelli | ||
|
Solving problems in surveying / A. Bannister, R. Baker |
Autore | Bannister, Arthur |
Edizione | [2. ed] |
Pubbl/distr/stampa | Harlow, : Longman, 1994 |
Descrizione fisica | 346 p. : ill. ; 24 cm |
Disciplina | 526.9 |
Altri autori (Persone) | Baker, Raymond |
ISBN | 05-8223-644-4 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Titolo uniforme | |
Record Nr. | UNICAMPANIA-VAN0038711 |
Bannister, Arthur | ||
Harlow, : Longman, 1994 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Vanvitelli | ||
|
Spillover tecnologici e origine della tecnologia agricola / Roberto Esposti |
Autore | Esposti, Roberto <1969- > |
Pubbl/distr/stampa | Ancona : Dipartimento di Economia dell'Università degli Studi di Ancona, 1999 |
Descrizione fisica | 73 p. ; 21 cm |
Disciplina | 526.9 |
Collana | Quaderni di ricerca |
Soggetto non controllato |
Economia
Agricoltura - Tecnologia |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | ita |
Record Nr. | UNINA-990002900090403321 |
Esposti, Roberto <1969- > | ||
Ancona : Dipartimento di Economia dell'Università degli Studi di Ancona, 1999 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|
Statistical methods for spatial planning and monitoring [[electronic resource] /] / edited by Silvestro Montrone, Paola Perchinunno |
Edizione | [1st ed. 2013.] |
Pubbl/distr/stampa | Milano : , : Springer Milan : , : Imprint : Springer, , 2013 |
Descrizione fisica | 1 online resource (166 p.) |
Disciplina | 526.9 |
Collana | Contributions to Statistics |
Soggetto topico |
Statistics
Optical data processing Statistics, general Computer Imaging, Vision, Pattern Recognition and Graphics |
ISBN |
1-283-74096-6
88-470-2751-9 |
Formato | Materiale a stampa |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto | 1. Geographical Disparities in Mortality Rates: Spatial Data Mining and Bayesian Hierarchical Modeling -- 2. A Fuzzy Approach to Ward’s Method of Classification: an Application Case To the Italian University System -- 3. Geostatistics and the Role of Variogram in Time Series Analysis: a Critical Review -- 4. Geostatistics and GIS: Tools for Environmental Risk Assessment -- 5. Socio-Economic Zoning: Comparing Two Statistical Methods -- 6. A Geostatistical Approach to Measure Shrinking Cities: the Case of Taranto -- 7. Social Identity as Determinant of Real Estate Economy in Manhattan. . |
Record Nr. | UNINA-9910438147603321 |
Milano : , : Springer Milan : , : Imprint : Springer, , 2013 | ||
Materiale a stampa | ||
Lo trovi qui: Univ. Federico II | ||
|