Advances in solid oxide fuel cells [[electronic resource] ] : a collection of papers presented at the 29th International Conference on Advanced Ceramics and Composites, January 23-28, 2005, Cocoa Beach, Florida / / editor, Narottam P. Bansal ; general editors, Dongming Zhu, Waltraud M. Kriven |
Pubbl/distr/stampa | Westerville, Ohio, : American Ceramic Society, c2005 |
Descrizione fisica | 1 online resource (338 p.) |
Disciplina |
620.14
621.312429 |
Altri autori (Persone) |
BansalNarottam P
KrivenWaltraud M ZhuDongming |
Collana | Ceramic engineering and science proceedings |
Soggetto topico |
Ceramic materials
Composite materials Solid oxide fuel cells |
Soggetto genere / forma | Electronic books. |
ISBN |
1-282-31478-5
9786612314780 0-470-29124-9 0-470-29163-X |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advances in Solid Oxide Fuel Cells; Contents; Preface; Overview and Current Status; Worldwide SOFC Technology Overview and Benchmark; U.S. DOE Solid Oxide Fuel Cells: Technical Advances; Processing/Fabrication; Single-Step Co-Firing Technique for SOFC Fabrication; Fabrication and Properties of an Anode-Supported Tubular IT-SOFC Based on Lanthanum Gallate; Low Cost SOFC Manufacturing Process; Y203-Stabilized ZrO2 Aerogels Prepared from an Epoxide Assisted Sol-Gel Synthesis for Use in SOFC Composite Cathodes; Pulsed Laser Deposition of BaCeo.85Y0.1503 Films; Characterizatio/Testing
Electrochemical Characterization of Vacuum Plasma Sprayed Planar Solid Oxide Fuel Cells and Short Stacks for Mobile Application Single Cell Testing and Performance Analysis of Planar Solid Oxide Fuelcells; Long-Term SOFC Stability with Coated Ferritic Stainless Steel Interconnect; Chemical Diffusion and Hydrogen Separation Properties of Lanthanum Ferrite and Doped Ceria Composite Mixed Conductors; Vapor Phase Silica Transport during SOFC Operation at 1000°C; The Effect of Inverter Ripple on Solid Oxide Fuel Cell Performance; Electrodes Study of Praseodyium Strontium Manganite for the Potential Use as a Solid Oxide Fuel Cell CathodeChromium Poisoning Effects on Various Cathodes; Anomolus Shrinkage of Lanthanum Strontium Manganite; Development and Characterization of SOFC Ni-YSZ Anodes Using Highly Porous Ni Foam; High Purity H2/H20/Nickel/Stabilized Zirconia Electrodes at 500°C; Characterization of Pore Structure of Electrodes of Solid Oxide Fuel Cells; Influence of Processing Parameters on Porosity of NiO-YSZ Solid Oxide Fuel Cell Anode Material Property Control of Cathodes and Anodes Produced by Slip Casting for Planar Solid Oxide Fuel CellsInterconnects; Surface Modification on Ferritic and Ni Based Alloys for Improved Oxidation Resistance in SOFC Applications; Ferritic Stainless Steel SOFC Interconnects with Thermally Grown (Mn,Co)304 Spinel Protection Layers; Chemical Reaction Behavior between Glass-Ceramic Sealants and High Chromium Ferritic Steels Under Various SOFC Conditions; Electrical Contacts between Cathodes and Metallic Interconnects in Solid Oxide Fuel Cells; Seals Finite Element Analysis of the Bonded Compliant Seal Design - A New Sealing Concept for Use in Planar Solid Oxide Fuel CellsGlass-Ceramic Materials of the System Ba0-Ca0-Si02 as Sealants for SOFC Applications; Layered Composite Seals for Solid Oxide Fuel Cells (SOFC); Glass Mica Composite Seals for Solid Oxide Fuel Cells .; Combined Ageing and Thermal Cycling of Compressive Mica Seals for Solid Oxide Fuel Cells; Mechanical Properties; Mechanical Properties of SOFC Seal Glass Composites; Fracture Energies of Brittle Sealants for Planar Solid Oxide Fuel Cells Failure Probability of Solid Oxide Fuel Cells |
Record Nr. | UNINA-9910144850103321 |
Westerville, Ohio, : American Ceramic Society, c2005 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advances in solid oxide fuel cells [[electronic resource] ] : a collection of papers presented at the 29th International Conference on Advanced Ceramics and Composites, January 23-28, 2005, Cocoa Beach, Florida / / editor, Narottam P. Bansal ; general editors, Dongming Zhu, Waltraud M. Kriven |
Pubbl/distr/stampa | Westerville, Ohio, : American Ceramic Society, c2005 |
Descrizione fisica | 1 online resource (338 p.) |
Disciplina |
620.14
621.312429 |
Altri autori (Persone) |
BansalNarottam P
KrivenWaltraud M ZhuDongming |
Collana | Ceramic engineering and science proceedings |
Soggetto topico |
Ceramic materials
Composite materials Solid oxide fuel cells |
ISBN |
1-282-31478-5
9786612314780 0-470-29124-9 0-470-29163-X |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advances in Solid Oxide Fuel Cells; Contents; Preface; Overview and Current Status; Worldwide SOFC Technology Overview and Benchmark; U.S. DOE Solid Oxide Fuel Cells: Technical Advances; Processing/Fabrication; Single-Step Co-Firing Technique for SOFC Fabrication; Fabrication and Properties of an Anode-Supported Tubular IT-SOFC Based on Lanthanum Gallate; Low Cost SOFC Manufacturing Process; Y203-Stabilized ZrO2 Aerogels Prepared from an Epoxide Assisted Sol-Gel Synthesis for Use in SOFC Composite Cathodes; Pulsed Laser Deposition of BaCeo.85Y0.1503 Films; Characterizatio/Testing
Electrochemical Characterization of Vacuum Plasma Sprayed Planar Solid Oxide Fuel Cells and Short Stacks for Mobile Application Single Cell Testing and Performance Analysis of Planar Solid Oxide Fuelcells; Long-Term SOFC Stability with Coated Ferritic Stainless Steel Interconnect; Chemical Diffusion and Hydrogen Separation Properties of Lanthanum Ferrite and Doped Ceria Composite Mixed Conductors; Vapor Phase Silica Transport during SOFC Operation at 1000°C; The Effect of Inverter Ripple on Solid Oxide Fuel Cell Performance; Electrodes Study of Praseodyium Strontium Manganite for the Potential Use as a Solid Oxide Fuel Cell CathodeChromium Poisoning Effects on Various Cathodes; Anomolus Shrinkage of Lanthanum Strontium Manganite; Development and Characterization of SOFC Ni-YSZ Anodes Using Highly Porous Ni Foam; High Purity H2/H20/Nickel/Stabilized Zirconia Electrodes at 500°C; Characterization of Pore Structure of Electrodes of Solid Oxide Fuel Cells; Influence of Processing Parameters on Porosity of NiO-YSZ Solid Oxide Fuel Cell Anode Material Property Control of Cathodes and Anodes Produced by Slip Casting for Planar Solid Oxide Fuel CellsInterconnects; Surface Modification on Ferritic and Ni Based Alloys for Improved Oxidation Resistance in SOFC Applications; Ferritic Stainless Steel SOFC Interconnects with Thermally Grown (Mn,Co)304 Spinel Protection Layers; Chemical Reaction Behavior between Glass-Ceramic Sealants and High Chromium Ferritic Steels Under Various SOFC Conditions; Electrical Contacts between Cathodes and Metallic Interconnects in Solid Oxide Fuel Cells; Seals Finite Element Analysis of the Bonded Compliant Seal Design - A New Sealing Concept for Use in Planar Solid Oxide Fuel CellsGlass-Ceramic Materials of the System Ba0-Ca0-Si02 as Sealants for SOFC Applications; Layered Composite Seals for Solid Oxide Fuel Cells (SOFC); Glass Mica Composite Seals for Solid Oxide Fuel Cells .; Combined Ageing and Thermal Cycling of Compressive Mica Seals for Solid Oxide Fuel Cells; Mechanical Properties; Mechanical Properties of SOFC Seal Glass Composites; Fracture Energies of Brittle Sealants for Planar Solid Oxide Fuel Cells Failure Probability of Solid Oxide Fuel Cells |
Record Nr. | UNISA-996209753203316 |
Westerville, Ohio, : American Ceramic Society, c2005 | ||
![]() | ||
Lo trovi qui: Univ. di Salerno | ||
|
Advances in solid oxide fuel cells [[electronic resource] ] : a collection of papers presented at the 29th International Conference on Advanced Ceramics and Composites, January 23-28, 2005, Cocoa Beach, Florida / / editor, Narottam P. Bansal ; general editors, Dongming Zhu, Waltraud M. Kriven |
Pubbl/distr/stampa | Westerville, Ohio, : American Ceramic Society, c2005 |
Descrizione fisica | 1 online resource (338 p.) |
Disciplina |
620.14
621.312429 |
Altri autori (Persone) |
BansalNarottam P
KrivenWaltraud M ZhuDongming |
Collana | Ceramic engineering and science proceedings |
Soggetto topico |
Ceramic materials
Composite materials Solid oxide fuel cells |
ISBN |
1-282-31478-5
9786612314780 0-470-29124-9 0-470-29163-X |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advances in Solid Oxide Fuel Cells; Contents; Preface; Overview and Current Status; Worldwide SOFC Technology Overview and Benchmark; U.S. DOE Solid Oxide Fuel Cells: Technical Advances; Processing/Fabrication; Single-Step Co-Firing Technique for SOFC Fabrication; Fabrication and Properties of an Anode-Supported Tubular IT-SOFC Based on Lanthanum Gallate; Low Cost SOFC Manufacturing Process; Y203-Stabilized ZrO2 Aerogels Prepared from an Epoxide Assisted Sol-Gel Synthesis for Use in SOFC Composite Cathodes; Pulsed Laser Deposition of BaCeo.85Y0.1503 Films; Characterizatio/Testing
Electrochemical Characterization of Vacuum Plasma Sprayed Planar Solid Oxide Fuel Cells and Short Stacks for Mobile Application Single Cell Testing and Performance Analysis of Planar Solid Oxide Fuelcells; Long-Term SOFC Stability with Coated Ferritic Stainless Steel Interconnect; Chemical Diffusion and Hydrogen Separation Properties of Lanthanum Ferrite and Doped Ceria Composite Mixed Conductors; Vapor Phase Silica Transport during SOFC Operation at 1000°C; The Effect of Inverter Ripple on Solid Oxide Fuel Cell Performance; Electrodes Study of Praseodyium Strontium Manganite for the Potential Use as a Solid Oxide Fuel Cell CathodeChromium Poisoning Effects on Various Cathodes; Anomolus Shrinkage of Lanthanum Strontium Manganite; Development and Characterization of SOFC Ni-YSZ Anodes Using Highly Porous Ni Foam; High Purity H2/H20/Nickel/Stabilized Zirconia Electrodes at 500°C; Characterization of Pore Structure of Electrodes of Solid Oxide Fuel Cells; Influence of Processing Parameters on Porosity of NiO-YSZ Solid Oxide Fuel Cell Anode Material Property Control of Cathodes and Anodes Produced by Slip Casting for Planar Solid Oxide Fuel CellsInterconnects; Surface Modification on Ferritic and Ni Based Alloys for Improved Oxidation Resistance in SOFC Applications; Ferritic Stainless Steel SOFC Interconnects with Thermally Grown (Mn,Co)304 Spinel Protection Layers; Chemical Reaction Behavior between Glass-Ceramic Sealants and High Chromium Ferritic Steels Under Various SOFC Conditions; Electrical Contacts between Cathodes and Metallic Interconnects in Solid Oxide Fuel Cells; Seals Finite Element Analysis of the Bonded Compliant Seal Design - A New Sealing Concept for Use in Planar Solid Oxide Fuel CellsGlass-Ceramic Materials of the System Ba0-Ca0-Si02 as Sealants for SOFC Applications; Layered Composite Seals for Solid Oxide Fuel Cells (SOFC); Glass Mica Composite Seals for Solid Oxide Fuel Cells .; Combined Ageing and Thermal Cycling of Compressive Mica Seals for Solid Oxide Fuel Cells; Mechanical Properties; Mechanical Properties of SOFC Seal Glass Composites; Fracture Energies of Brittle Sealants for Planar Solid Oxide Fuel Cells Failure Probability of Solid Oxide Fuel Cells |
Record Nr. | UNINA-9910830737603321 |
Westerville, Ohio, : American Ceramic Society, c2005 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Advances in solid oxide fuel cells [[electronic resource] ] : a collection of papers presented at the 29th International Conference on Advanced Ceramics and Composites, January 23-28, 2005, Cocoa Beach, Florida / / editor, Narottam P. Bansal ; general editors, Dongming Zhu, Waltraud M. Kriven |
Pubbl/distr/stampa | Westerville, Ohio, : American Ceramic Society, c2005 |
Descrizione fisica | 1 online resource (338 p.) |
Disciplina |
620.14
621.312429 |
Altri autori (Persone) |
BansalNarottam P
KrivenWaltraud M ZhuDongming |
Collana | Ceramic engineering and science proceedings |
Soggetto topico |
Ceramic materials
Composite materials Solid oxide fuel cells |
ISBN |
1-282-31478-5
9786612314780 0-470-29124-9 0-470-29163-X |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Advances in Solid Oxide Fuel Cells; Contents; Preface; Overview and Current Status; Worldwide SOFC Technology Overview and Benchmark; U.S. DOE Solid Oxide Fuel Cells: Technical Advances; Processing/Fabrication; Single-Step Co-Firing Technique for SOFC Fabrication; Fabrication and Properties of an Anode-Supported Tubular IT-SOFC Based on Lanthanum Gallate; Low Cost SOFC Manufacturing Process; Y203-Stabilized ZrO2 Aerogels Prepared from an Epoxide Assisted Sol-Gel Synthesis for Use in SOFC Composite Cathodes; Pulsed Laser Deposition of BaCeo.85Y0.1503 Films; Characterizatio/Testing
Electrochemical Characterization of Vacuum Plasma Sprayed Planar Solid Oxide Fuel Cells and Short Stacks for Mobile Application Single Cell Testing and Performance Analysis of Planar Solid Oxide Fuelcells; Long-Term SOFC Stability with Coated Ferritic Stainless Steel Interconnect; Chemical Diffusion and Hydrogen Separation Properties of Lanthanum Ferrite and Doped Ceria Composite Mixed Conductors; Vapor Phase Silica Transport during SOFC Operation at 1000°C; The Effect of Inverter Ripple on Solid Oxide Fuel Cell Performance; Electrodes Study of Praseodyium Strontium Manganite for the Potential Use as a Solid Oxide Fuel Cell CathodeChromium Poisoning Effects on Various Cathodes; Anomolus Shrinkage of Lanthanum Strontium Manganite; Development and Characterization of SOFC Ni-YSZ Anodes Using Highly Porous Ni Foam; High Purity H2/H20/Nickel/Stabilized Zirconia Electrodes at 500°C; Characterization of Pore Structure of Electrodes of Solid Oxide Fuel Cells; Influence of Processing Parameters on Porosity of NiO-YSZ Solid Oxide Fuel Cell Anode Material Property Control of Cathodes and Anodes Produced by Slip Casting for Planar Solid Oxide Fuel CellsInterconnects; Surface Modification on Ferritic and Ni Based Alloys for Improved Oxidation Resistance in SOFC Applications; Ferritic Stainless Steel SOFC Interconnects with Thermally Grown (Mn,Co)304 Spinel Protection Layers; Chemical Reaction Behavior between Glass-Ceramic Sealants and High Chromium Ferritic Steels Under Various SOFC Conditions; Electrical Contacts between Cathodes and Metallic Interconnects in Solid Oxide Fuel Cells; Seals Finite Element Analysis of the Bonded Compliant Seal Design - A New Sealing Concept for Use in Planar Solid Oxide Fuel CellsGlass-Ceramic Materials of the System Ba0-Ca0-Si02 as Sealants for SOFC Applications; Layered Composite Seals for Solid Oxide Fuel Cells (SOFC); Glass Mica Composite Seals for Solid Oxide Fuel Cells .; Combined Ageing and Thermal Cycling of Compressive Mica Seals for Solid Oxide Fuel Cells; Mechanical Properties; Mechanical Properties of SOFC Seal Glass Composites; Fracture Energies of Brittle Sealants for Planar Solid Oxide Fuel Cells Failure Probability of Solid Oxide Fuel Cells |
Record Nr. | UNINA-9910841044803321 |
Westerville, Ohio, : American Ceramic Society, c2005 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Developments in advanced ceramics and composites [[electronic resource] ] : a collection of papers presented at the 29th International Conference on Advanced Ceramics and Composites, January 23-28, 2005, Cocoa Beach, Florida / / editors, Manuel E. Brito ... [et al.] ; general editors, Dongming Zhu, Waltraud M. Kriven |
Pubbl/distr/stampa | Westerville, OH, : American Ceramic Society, c2005 |
Descrizione fisica | 1 online resource (409 p.) |
Disciplina | 620.14 |
Altri autori (Persone) |
BritoManuel E
ZhuDongming KrivenWaltraud M |
Collana | Ceramic engineering and science proceedings |
Soggetto topico |
Ceramic materials
Ceramics Composite materials |
Soggetto genere / forma | Electronic books. |
ISBN |
1-282-31374-6
9786612313745 0-470-29128-1 0-470-29167-2 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Developments in Advanced Ceramics and Composites; Contents; Preface; Ceramics in Environmental Applications; Characterization of MnO-Doped Lanthanum Hexaluminate (LaMnAlil 019) in Terms of Selective Catalytic Reduction of NOx by Addition of Hydrocarbon Reductant (HC-SCR); High Porosity Cordierite Filter Development for NOdPM Reduction; Thermal Stability of Cordierite Supported V205-WO3-TiO2 SCR Catalyst for Diesel NOx Reduction; A New Family of Uniformly Porous Composites with 3-0 Network Structure (UPC-3D): A Porous A120dLaP04 In Situ Composite
Novel, Alkali-Bonded, Ceramic Filtration MembranesControlling Microstructural Anisotropy During Forming; Characterization of USA Glass Ceramics Filters Obtained by the Replication Method; Fracture Behavior and Microstructure of the Porous Alumina Tube; Tensile Testing of Sic-Based Hot Gas Filters at 600% Water Vapor; Quasi-Ductile Behavior of Diesel Particulate Filter Axial Strength Test Bars with Ridges; Multifunctional Material Systems Based on Ceramics; Multifunctional Electroceramic Composite Processing by Electrophoretic Depositon Transparent Alumina Ceramics with Sub-Microstructure by Means of Electrophoretic DepositionFunctional Nanoceramic Coatings on Microstructured Surfaces via Electrophoretic Deposition; High Damping in Piezoelectric Reinforced Metal Matrix Composites; CarbodCarbon and Ceramic Composite Materials in Friction; Preparation Of Large-Scale Carbon Fiber Reinforced Carbon Matrix Composites (C-C) By Thermal Gradient Chemical Vapor Infiltration (TGCVI); Frictional Performance and Local Properties of C/C Composites; Humidity and Frictional Performance of C/C Composites Study of ""Adsorption/Desorption"" Phenomena on Friction Debris of Aircraft BrakesFriction and Wear of Carbon Brake Materials; Processing and Friction Properties of 3D-C/C-SiC Model Composites with a Multilayered C-Sic Matrix Engineered at the Nanometer Scale; Carbon Fiber-Reinforced Boron Carbide Friction Materials; Thermal Shock Impact on C/C and Si Melt Infiltrated C/C Materials (SiMI); Reliability of Ceramic and Composite Components; Post Engine Test Characterization of Self Sealing Ceramic Matrix Composites for Nozzle Seals in Gas Turbine Engines Dimension Stability Analysis of NlTE SiC/SiC Composite Using Ion Bombardments for the Investigation of Reliability as Fusion MaterialsFracture Strength Simulation of SIC Microtensile Specimens - Accounting for Stochastic Variables; Design and Reliability of Ceramics: Do Modelers, Designers, and Fractographers See the Same World?; The Effects of Incorporating System Level Variability into the Reliability Analysis for Ceramic Components; Finite-Element-Based Electronic Structure Calculation in MetaVCeramic Interface Problems; 30 FEM Simulation of MLCC Thermal Shock Analysis of Firing and Fabrication Stresses and Failure in Ceramic-Lined CannonTubes |
Record Nr. | UNINA-9910144848703321 |
Westerville, OH, : American Ceramic Society, c2005 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Developments in advanced ceramics and composites [[electronic resource] ] : a collection of papers presented at the 29th International Conference on Advanced Ceramics and Composites, January 23-28, 2005, Cocoa Beach, Florida / / editors, Manuel E. Brito ... [et al.] ; general editors, Dongming Zhu, Waltraud M. Kriven |
Pubbl/distr/stampa | Westerville, OH, : American Ceramic Society, c2005 |
Descrizione fisica | 1 online resource (409 p.) |
Disciplina | 620.14 |
Altri autori (Persone) |
BritoManuel E
ZhuDongming KrivenWaltraud M |
Collana | Ceramic engineering and science proceedings |
Soggetto topico |
Ceramic materials
Ceramics Composite materials |
ISBN |
1-282-31374-6
9786612313745 0-470-29128-1 0-470-29167-2 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Developments in Advanced Ceramics and Composites; Contents; Preface; Ceramics in Environmental Applications; Characterization of MnO-Doped Lanthanum Hexaluminate (LaMnAlil 019) in Terms of Selective Catalytic Reduction of NOx by Addition of Hydrocarbon Reductant (HC-SCR); High Porosity Cordierite Filter Development for NOdPM Reduction; Thermal Stability of Cordierite Supported V205-WO3-TiO2 SCR Catalyst for Diesel NOx Reduction; A New Family of Uniformly Porous Composites with 3-0 Network Structure (UPC-3D): A Porous A120dLaP04 In Situ Composite
Novel, Alkali-Bonded, Ceramic Filtration MembranesControlling Microstructural Anisotropy During Forming; Characterization of USA Glass Ceramics Filters Obtained by the Replication Method; Fracture Behavior and Microstructure of the Porous Alumina Tube; Tensile Testing of Sic-Based Hot Gas Filters at 600% Water Vapor; Quasi-Ductile Behavior of Diesel Particulate Filter Axial Strength Test Bars with Ridges; Multifunctional Material Systems Based on Ceramics; Multifunctional Electroceramic Composite Processing by Electrophoretic Depositon Transparent Alumina Ceramics with Sub-Microstructure by Means of Electrophoretic DepositionFunctional Nanoceramic Coatings on Microstructured Surfaces via Electrophoretic Deposition; High Damping in Piezoelectric Reinforced Metal Matrix Composites; CarbodCarbon and Ceramic Composite Materials in Friction; Preparation Of Large-Scale Carbon Fiber Reinforced Carbon Matrix Composites (C-C) By Thermal Gradient Chemical Vapor Infiltration (TGCVI); Frictional Performance and Local Properties of C/C Composites; Humidity and Frictional Performance of C/C Composites Study of ""Adsorption/Desorption"" Phenomena on Friction Debris of Aircraft BrakesFriction and Wear of Carbon Brake Materials; Processing and Friction Properties of 3D-C/C-SiC Model Composites with a Multilayered C-Sic Matrix Engineered at the Nanometer Scale; Carbon Fiber-Reinforced Boron Carbide Friction Materials; Thermal Shock Impact on C/C and Si Melt Infiltrated C/C Materials (SiMI); Reliability of Ceramic and Composite Components; Post Engine Test Characterization of Self Sealing Ceramic Matrix Composites for Nozzle Seals in Gas Turbine Engines Dimension Stability Analysis of NlTE SiC/SiC Composite Using Ion Bombardments for the Investigation of Reliability as Fusion MaterialsFracture Strength Simulation of SIC Microtensile Specimens - Accounting for Stochastic Variables; Design and Reliability of Ceramics: Do Modelers, Designers, and Fractographers See the Same World?; The Effects of Incorporating System Level Variability into the Reliability Analysis for Ceramic Components; Finite-Element-Based Electronic Structure Calculation in MetaVCeramic Interface Problems; 30 FEM Simulation of MLCC Thermal Shock Analysis of Firing and Fabrication Stresses and Failure in Ceramic-Lined CannonTubes |
Record Nr. | UNISA-996209751303316 |
Westerville, OH, : American Ceramic Society, c2005 | ||
![]() | ||
Lo trovi qui: Univ. di Salerno | ||
|
Developments in advanced ceramics and composites [[electronic resource] ] : a collection of papers presented at the 29th International Conference on Advanced Ceramics and Composites, January 23-28, 2005, Cocoa Beach, Florida / / editors, Manuel E. Brito ... [et al.] ; general editors, Dongming Zhu, Waltraud M. Kriven |
Pubbl/distr/stampa | Westerville, OH, : American Ceramic Society, c2005 |
Descrizione fisica | 1 online resource (409 p.) |
Disciplina | 620.14 |
Altri autori (Persone) |
BritoManuel E
ZhuDongming KrivenWaltraud M |
Collana | Ceramic engineering and science proceedings |
Soggetto topico |
Ceramic materials
Ceramics Composite materials |
ISBN |
1-282-31374-6
9786612313745 0-470-29128-1 0-470-29167-2 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Developments in Advanced Ceramics and Composites; Contents; Preface; Ceramics in Environmental Applications; Characterization of MnO-Doped Lanthanum Hexaluminate (LaMnAlil 019) in Terms of Selective Catalytic Reduction of NOx by Addition of Hydrocarbon Reductant (HC-SCR); High Porosity Cordierite Filter Development for NOdPM Reduction; Thermal Stability of Cordierite Supported V205-WO3-TiO2 SCR Catalyst for Diesel NOx Reduction; A New Family of Uniformly Porous Composites with 3-0 Network Structure (UPC-3D): A Porous A120dLaP04 In Situ Composite
Novel, Alkali-Bonded, Ceramic Filtration MembranesControlling Microstructural Anisotropy During Forming; Characterization of USA Glass Ceramics Filters Obtained by the Replication Method; Fracture Behavior and Microstructure of the Porous Alumina Tube; Tensile Testing of Sic-Based Hot Gas Filters at 600% Water Vapor; Quasi-Ductile Behavior of Diesel Particulate Filter Axial Strength Test Bars with Ridges; Multifunctional Material Systems Based on Ceramics; Multifunctional Electroceramic Composite Processing by Electrophoretic Depositon Transparent Alumina Ceramics with Sub-Microstructure by Means of Electrophoretic DepositionFunctional Nanoceramic Coatings on Microstructured Surfaces via Electrophoretic Deposition; High Damping in Piezoelectric Reinforced Metal Matrix Composites; CarbodCarbon and Ceramic Composite Materials in Friction; Preparation Of Large-Scale Carbon Fiber Reinforced Carbon Matrix Composites (C-C) By Thermal Gradient Chemical Vapor Infiltration (TGCVI); Frictional Performance and Local Properties of C/C Composites; Humidity and Frictional Performance of C/C Composites Study of ""Adsorption/Desorption"" Phenomena on Friction Debris of Aircraft BrakesFriction and Wear of Carbon Brake Materials; Processing and Friction Properties of 3D-C/C-SiC Model Composites with a Multilayered C-Sic Matrix Engineered at the Nanometer Scale; Carbon Fiber-Reinforced Boron Carbide Friction Materials; Thermal Shock Impact on C/C and Si Melt Infiltrated C/C Materials (SiMI); Reliability of Ceramic and Composite Components; Post Engine Test Characterization of Self Sealing Ceramic Matrix Composites for Nozzle Seals in Gas Turbine Engines Dimension Stability Analysis of NlTE SiC/SiC Composite Using Ion Bombardments for the Investigation of Reliability as Fusion MaterialsFracture Strength Simulation of SIC Microtensile Specimens - Accounting for Stochastic Variables; Design and Reliability of Ceramics: Do Modelers, Designers, and Fractographers See the Same World?; The Effects of Incorporating System Level Variability into the Reliability Analysis for Ceramic Components; Finite-Element-Based Electronic Structure Calculation in MetaVCeramic Interface Problems; 30 FEM Simulation of MLCC Thermal Shock Analysis of Firing and Fabrication Stresses and Failure in Ceramic-Lined CannonTubes |
Record Nr. | UNINA-9910830245803321 |
Westerville, OH, : American Ceramic Society, c2005 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Developments in advanced ceramics and composites [[electronic resource] ] : a collection of papers presented at the 29th International Conference on Advanced Ceramics and Composites, January 23-28, 2005, Cocoa Beach, Florida / / editors, Manuel E. Brito ... [et al.] ; general editors, Dongming Zhu, Waltraud M. Kriven |
Pubbl/distr/stampa | Westerville, OH, : American Ceramic Society, c2005 |
Descrizione fisica | 1 online resource (409 p.) |
Disciplina | 620.14 |
Altri autori (Persone) |
BritoManuel E
ZhuDongming KrivenWaltraud M |
Collana | Ceramic engineering and science proceedings |
Soggetto topico |
Ceramic materials
Ceramics Composite materials |
ISBN |
1-282-31374-6
9786612313745 0-470-29128-1 0-470-29167-2 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Nota di contenuto |
Developments in Advanced Ceramics and Composites; Contents; Preface; Ceramics in Environmental Applications; Characterization of MnO-Doped Lanthanum Hexaluminate (LaMnAlil 019) in Terms of Selective Catalytic Reduction of NOx by Addition of Hydrocarbon Reductant (HC-SCR); High Porosity Cordierite Filter Development for NOdPM Reduction; Thermal Stability of Cordierite Supported V205-WO3-TiO2 SCR Catalyst for Diesel NOx Reduction; A New Family of Uniformly Porous Composites with 3-0 Network Structure (UPC-3D): A Porous A120dLaP04 In Situ Composite
Novel, Alkali-Bonded, Ceramic Filtration MembranesControlling Microstructural Anisotropy During Forming; Characterization of USA Glass Ceramics Filters Obtained by the Replication Method; Fracture Behavior and Microstructure of the Porous Alumina Tube; Tensile Testing of Sic-Based Hot Gas Filters at 600% Water Vapor; Quasi-Ductile Behavior of Diesel Particulate Filter Axial Strength Test Bars with Ridges; Multifunctional Material Systems Based on Ceramics; Multifunctional Electroceramic Composite Processing by Electrophoretic Depositon Transparent Alumina Ceramics with Sub-Microstructure by Means of Electrophoretic DepositionFunctional Nanoceramic Coatings on Microstructured Surfaces via Electrophoretic Deposition; High Damping in Piezoelectric Reinforced Metal Matrix Composites; CarbodCarbon and Ceramic Composite Materials in Friction; Preparation Of Large-Scale Carbon Fiber Reinforced Carbon Matrix Composites (C-C) By Thermal Gradient Chemical Vapor Infiltration (TGCVI); Frictional Performance and Local Properties of C/C Composites; Humidity and Frictional Performance of C/C Composites Study of ""Adsorption/Desorption"" Phenomena on Friction Debris of Aircraft BrakesFriction and Wear of Carbon Brake Materials; Processing and Friction Properties of 3D-C/C-SiC Model Composites with a Multilayered C-Sic Matrix Engineered at the Nanometer Scale; Carbon Fiber-Reinforced Boron Carbide Friction Materials; Thermal Shock Impact on C/C and Si Melt Infiltrated C/C Materials (SiMI); Reliability of Ceramic and Composite Components; Post Engine Test Characterization of Self Sealing Ceramic Matrix Composites for Nozzle Seals in Gas Turbine Engines Dimension Stability Analysis of NlTE SiC/SiC Composite Using Ion Bombardments for the Investigation of Reliability as Fusion MaterialsFracture Strength Simulation of SIC Microtensile Specimens - Accounting for Stochastic Variables; Design and Reliability of Ceramics: Do Modelers, Designers, and Fractographers See the Same World?; The Effects of Incorporating System Level Variability into the Reliability Analysis for Ceramic Components; Finite-Element-Based Electronic Structure Calculation in MetaVCeramic Interface Problems; 30 FEM Simulation of MLCC Thermal Shock Analysis of Firing and Fabrication Stresses and Failure in Ceramic-Lined CannonTubes |
Record Nr. | UNINA-9910840564103321 |
Westerville, OH, : American Ceramic Society, c2005 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Developments in porous, biological and geopolymer ceramics : a collection of papers presented at the 31st International Conference on Advanced Ceramics and Composites, January 21-21, 2007, Daytona Beach, Florida |
Pubbl/distr/stampa | [Place of publication not identified], : Wiley Interscience, 2007 |
Collana | Ceramic engineering and science proceedings Developments in porous, biological and geopolymer ceramics |
Soggetto topico |
Ceramic materials
Composite materials Solid oxide fuel cells Chemical & Materials Engineering Engineering & Applied Sciences Materials Science |
ISBN |
0-470-33982-9
0-470-33974-8 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Record Nr. | UNINA-9910139414303321 |
[Place of publication not identified], : Wiley Interscience, 2007 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|
Developments in porous, biological and geopolymer ceramics : a collection of papers presented at the 31st International Conference on Advanced Ceramics and Composites, January 21-21, 2007, Daytona Beach, Florida |
Pubbl/distr/stampa | [Place of publication not identified], : Wiley Interscience, 2007 |
Collana | Ceramic engineering and science proceedings Developments in porous, biological and geopolymer ceramics |
Soggetto topico |
Ceramic materials
Composite materials Solid oxide fuel cells Chemical & Materials Engineering Engineering & Applied Sciences Materials Science |
ISBN |
0-470-33982-9
0-470-33974-8 |
Formato | Materiale a stampa ![]() |
Livello bibliografico | Monografia |
Lingua di pubblicazione | eng |
Record Nr. | UNINA-9910830960903321 |
[Place of publication not identified], : Wiley Interscience, 2007 | ||
![]() | ||
Lo trovi qui: Univ. Federico II | ||
|