{"text_format":"2","workbook":"xls","n_sheets":1,"sheets":["report2"],"not_rendered":{"charts":0,"images":0,"macros":0,"external_links":1,"defined_names":1,"comments":0,"pivot_tables":0},"unopened":[],"bounds":{"document_bytes":16777216,"sheet_cells":100000,"run_cost":"one","rows_first":2000,"rows_last":500,"rows_between":2000,"halvings":0,"cell_chars":16384,"cell_head_chars":4096},"cells_cut":0,"cells_raw":0,"read":"whole","date_system":"1900","formulas":"cached_only"}

{"sheet":"report2","index":0,"n_rows":31,"n_cols":5,"rows_kept":31,"cut":false,"hidden":false,"merged":[[0,2,0,3],[0,4,0,5],[1,2,1,3],[1,4,1,5],[2,2,2,3],[2,4,2,5],[3,2,3,3],[4,2,4,3],[6,2,6,3],[7,2,7,3],[8,2,8,3],[9,2,9,3],[10,2,10,3],[18,2,18,3],[19,2,19,3],[21,2,21,3]],"flags":["formulas_cached_only"]}
[null,"1.","Record Nr.",null,"UNINA9910855368903321"]
[null,null,"Autore",null,"Carfagni Monica"]
[null,null,"Titolo",null,"Design Tools and Methods in Industrial Engineering III : Proceedings of the Third International Conference on Design Tools and Methods in Industrial Engineering, ADM 2023, September 6–8, 2023, Florence, Italy, Volume 2 / / edited by Monica Carfagni, Rocco Furferi, Paolo Di Stefano, Lapo Governi, Francesco Gherardini"]
[null,null,"Pubbl/distr/stampa",null,"Cham : , : Springer Nature Switzerland : , : Imprint : Springer, , 2024"]
[null,null,"ISBN",null,"9783031580949"]
[{"$nulls":4},"303158094X"]
[null,null,"Edizione",null,"[1st ed. 2024.]"]
[null,null,"Descrizione fisica",null,"1 online resource (630 pages)"]
[null,null,"Collana",null,"Lecture Notes in Mechanical Engineering, , 2195-4364"]
[null,null,"Disciplina",null,"6,200,042"]
[null,null,"Soggetti",null,"Engineering design"]
[{"$nulls":4},"Industrial engineering"]
[{"$nulls":4},"Production engineering"]
[{"$nulls":4},"User interfaces (Computer systems)"]
[{"$nulls":4},"Human-computer interaction"]
[{"$nulls":4},"Engineering Design"]
[{"$nulls":4},"Industrial and Production Engineering"]
[{"$nulls":4},"User Interfaces and Human Computer Interaction"]
[null,null,"Lingua di pubblicazione",null,"Inglese"]
[null,null,"Formato",null,"Materiale a stampa"]
[null,null,null,"Livello bibliografico","Monografia"]
[null,null,"Nota di contenuto",null,"Intro -- Foreword -- Letter to Authors -- Preface -- Organization -- Contents -- Advanced Human Body Acquisition and Modelling Techniques -- From Real-Time Acquisition to Mesh Morphing of Foot at Different Positions -- 1 Introduction -- 2 Materials and Methods -- 2.1 Foot Acquisition -- 2.2 Pre-processing -- 2.3 First Mesh Morphing Analysis -- 2.4 Interpolation Analysis -- 2.5 Second Mesh Morphing Analysis -- 3 Results -- 3.1 Interpolation Analysis Results -- 3.2 Shape Prediction on the Training Dataset -- 3.3 Shape Prediction on the Control Dataset -- 4 Discussion and Conclusions -- References -- A Numerical Simulation Approach to Study the Effects of MADs Embedded with Elastic Bands in OSA Treatment -- 1 Introduction and Research Context -- 2 The Finite Element Model -- 2.1 3D Model Reconstruction -- 2.2 Material Properties Definition -- 2.3 Boundary Conditions Settings -- 2.4 Model Discretisation -- 3 Results and Discussion -- 4 Conclusions -- References -- A Real-Time "]
[{"$nulls":4},"Acquisition Method Development for the Wrist Movements Rehabilitation -- 1 Introduction -- 2 Real-Time Acquisition with ToF Sensors -- 3 Materials and Methods -- 3.1 Development of a Wrist Rehabilitation System -- 3.2 Workflow for Hand and Wrist Acquisition -- 3.3 Analysis of Wrist Rehabilitation's Movements -- 4 Results Analysis -- 5 Conclusions -- References -- Spine Line Identification from Human Back Discretized Models by Geometric Differential Properties Analysis -- 1 Introduction -- 2 Literature Background -- 3 Methodology -- 4 Experimental Results -- 5 Discussion and Conclusions -- References -- Diagnostic Enface Imaging of Retinal Vascularization: Topological Reconstruction and Intersection Identification -- 1 Introduction -- 2 Method -- 2.1 Structural Characterization of Vessels -- 2.2 Recognition of Spatial Intersection Between Vessels."]
[{"$nulls":4},"2.3 Vessel Connectivity Analysis -- 3 Results -- 4 Conclusions -- References -- Cerebral Vessels Diagnostic Investigation: Vessel Classification from Medial Axis Evaluation -- 1 Introduction -- 2 Methods -- 2.1 Morphological Analysis of Cerebral Vessels -- 2.2 Identification of Vessel Traits and Bifurcation Points -- 3 Results -- 4 Conclusions -- References -- Development of a Methodology to Model an Average Neck Shape from 3D Optical Scanning -- 1 Introduction -- 2 Materials and Methods -- 2.1 3D Scanning and Reconstruction of Neck's Geometries -- 2.2 Mesh Decimation -- 2.3 Determination of Landmarks -- 2.4 Mesh Morphing and Generation of an 'Average' Neck -- 3 Results and Discussion -- 3.1 Error Evaluation -- 4 Conclusions -- References -- Artificial Intelligence in Design for Sustainability -- Machine Learning for Costing Gas-Turbine Components -- 1 Introduction -- 2 Conceptual Costing Methodology -- 2.1 Business Understanding -- 2.2 Data Understanding -- 2.3 Data Preparation -- 2.4 Modelling -- 2.5 Evaluation -- 2.6 Deployment -- 3 Case Study -- 4 Results and Discussion -- 5 Conclusions -- References -- Eco-design Framework for a Battery Sustainable Lifecycle Management -- 1 Introduction -- 2 State of Art -- 3 Framework for Battery Eco-design -- 4 Framework Implementation and Discussion -- 5 Conclusions -- References -- A Method Based on Machine Learning Techniques for the Development of a Parametric Environmental Impact Model for Industrial Electric Vehicles -- 1 Introduction -- 2 Method -- 2.1 Database Creation -- 2.2 Predictive Model -- 3 Case Study -- 4 Results and Discussion -- 5 Conclusion -- References -- Automating Landslips Segmentation for Damage Assessment: A Comparison Between Deep Learning and Classical Models -- 1 Introduction -- 2 Classical Computer Vision Methods -- 2.1 Thresholding -- 2.2 Edge Detection -- 2.3 Canny Algorithm."]
[{"$nulls":4},"3 U-Net for Landslips Segmentation -- 3.1 U-Net Model -- 4 Implementation -- 5 Conclusion -- References -- Life Cycle Impact Assessment of Mechatronic Products: Towards Engineering Eco-Design for Hobs Technologies -- 1 Introduction -- 2 Materials and Methods -- 3 Results and Discussion -- 4 Conclusions -- References -- Design for Sports Engineering -- Design of an Advanced System for Motorbike Helmets Able to Dissipate Rotational Accelerations Caused by Tangential Impacts -- 1 Introduction -- 2 Methods -- 2.1 Fluid Synthesis and Characterization -- 2.2 Pads and Helmet Preparation -- 2.3 Impact Tests -- 3 Results -- 3.1 Fluid Characterization -- 3.2 Tangential Impact Tests -- 3.3 Helmet Testing -- 4 Discussion -- 5 Conclusions -- References -- Development and Testing of Auxetic Shoulder Straps for Sport Backpacks -- 1 Introduction -- 2 Experimental -- 2.1 Materials -- 2.2 Material Characterizations -- 3 Results and Discussions -- 4 Conclusions -- References -- Inverse "]
[{"$nulls":4},"Kinematics to Simulate Sport Movements in Virtual Environment -- 1 Introduction -- 2 Methods -- 2.1 User Study -- 2.2 Multibody Model Design -- 2.3 Model Actuation -- 2.4 Data Processing -- 3 Results -- 4 Discussion -- 5 Conclusion and Outlook -- References -- Ergonomic Comfort of Trekking Backpacks: Measurements of Pressure Exerted by Shoulder Straps and Hip Belt in Female Users -- 1 Introduction -- 2 Materials and Methods -- 3 Results and Discussion -- 3.1 Effect of Backpack Type on the Interface Pressure -- 3.2 Effect of Biometric Characteristics on the Interface Pressure -- 4 Conclusions -- 6. References -- Development of Environmentally Friendly Protective Mats for Climbing Gyms - Analysis of Traditional Mat Systems and Determination of Their Impact Absorption Capacity -- 1 Introduction -- 1.1 Historical Background -- 1.2 Who is Bouldering How and Why? -- 1.3 Safety Equipment."]
[{"$nulls":4},"2 Methods -- 2.1 Apparatus -- 2.2 Test Procedure -- 2.3 Data Processing -- 2.4 Mat Systems -- 3 Results -- 4 Discussion -- References -- Reliability of a Test Method to Assess Ice Hockey Head Impacts -- 1 Introduction -- 2 Methods -- 3 Results -- 4 Discussion -- 5 Conclusion -- References -- Proof-of-Concept of an Adaptable Mechanical Metamaterial for Ice Hockey Helmet Liners -- 1 Introduction -- 2 Methods -- 3 Results -- 4 Discussion -- 5 Conclusion -- References -- Design Development of a Repeatable Helmet Test System for Public Order Threat Recreations -- 1 Introduction -- 1.1 Laboratory Recreation of Situational Threats -- 1.2 Current Systems for Repeatable Helmet Impact Testing -- 2 Design Methodology -- 2.1 Design Definition -- 2.2 Bearing Selection -- 2.3 Drop Plate Refinement -- 3 Final Design -- 4 Discussion -- 5 Conclusion -- References -- Robust Design of Smart Shorts for Muscle Activity Analysis -- 1 Introduction -- 2 Materials and Methods -- 2.1 Pattern Block -- 2.2 Robust Design -- 3 Results -- 4 Conclusions -- References -- A Novel Approach Combining Rigging Animation Technique and CFD to Assess Aerodynamic Performances of Professional Cyclists -- 1 Introduction -- 2 Proposed Workflow -- 2.1 3D Scanning -- 2.2 Rigging and Positions Generation -- 2.3 Computational Fluid Dynamics -- 2.4 3D Printing and Wind Tunnel Setting -- 3 Results and Validation -- 4 Conclusions -- References -- Towards Parametric Modelling of Human Bronchial Tree for Computational Fluid Dynamics -- 1 Introduction -- 2 Material and Methods -- 2.1 Parametric CAD Model Generation -- 2.2 CFD Simulations -- 3 Results -- 4 Discussion and Conclusions -- References -- Design Methods in Fusion Engineering -- Multiphysics FEM Integration Issues - A Case Study in Nuclear Fusion Research Activities -- 1 Introduction -- 2 Material and Methods -- 2.1 Analysis Settings."]
[{"$nulls":4},"2.2 AWB Interpolation Settings Study -- 3 Case Study: DEMO Divertor Cassette -- 3.1 Background on DEMO Divertor -- 3.2 Mesh Specifics Preliminary Evaluation -- 4 Results -- 5 Conclusions -- References -- Maintenance Procedure on WCLL Ancillary System-Virtual Reality Application -- 1 Introduction -- 2 Field of Application-3D Model and VR -- 2.1 Description of the Ancillary Systems -- 2.2 Virtual Reality-Description and Application -- 3 Results -- 3.1 Interferences and Model Check -- 3.2 Maintainability -- 3.3 Ergonomic Aspect -- 4 Conclusion -- References -- Systems Engineering and Multi-criteria Decision Making Technique for Concept Design of DTT Divertor Fixation System -- 1 Introduction -- 2 Fuzzy AHP -- 3 Requirement Elicitation and Design of the Conceived Solutions -- 3.1 First Solution: Wedges Fixation System -- 3.2 Second Solution: Spring Pack Fixation System -- 3.3 Third Solution: Wishbone -- 4 AHP Implementation and Results -- 5 Conclusion -- References -- The Role of a Remote "]
[{"$nulls":4},"Handling Facility in the Design Process of a Fusion Reactor -- 1 Introduction -- 2 The Function of a RH Test Facility in the Design Flow -- 3 The Main RH Test Facilities for Fusion Reactors and Their Achievements -- 3.1 JET Experience in Remote Handling Test Facilities -- 3.2 Remote Handling Test Facilities in Support of ITER Project -- 3.3 RH Test Platform in CRAFT Facility for Chinese CFETR Project -- 3.4 Remote Handling Test Facilities Comparison -- 3.5 The Role of RH Test Facilities in the EUROFusion Roadmap -- 4 A Forthcoming Innovative RH Test Facility for DTT Project -- 5 Conclusions -- References -- Fusion Energy: Towards Feasible Power Plant Designs -- 1 Introduction -- 2 Systems Design, Plant Architecture and Critical Design Issues -- 3 Maintainable DEMO Designs as a Pre-requisite for Viability."]
[{"$nulls":4},"3.1 Maintenance of the DEMO Breeding Banket: On the Way to a Solution to a Key Remote Handling Challenge."]
[null,null,null,"Sommario/riassunto","This book gathers original peer-reviewed papers reporting on innovative methods and tools in design, modeling, simulation and optimization, and their applications in engineering design, manufacturing, and other relevant industrial sectors. Based on contributions to the Third International Conference on Design Tools and Methods in Industrial Engineering, ADM 2023, held on September 6–8, 2023, in Florence, Italy, and organized by the Italian Association of Design Methods and Tools for Industrial Engineering, and the Department of Industrial Engineering of the University of Florence, this second volume of a 2-volume set focuses on interdisciplinary topics in design, such as human body acquisition and modelling, human factors and user-centered design, digital factories, and design methods for different engineering applications. All in all, this book provides academics and professionals with a timely overview and extensive information on trends and technologies in industrial design and manufacturing. ."]